2 Screenshots

About This File

- deutsch und englisch umschaltbar in einer Bedienoberfläche

=================================================

HERE ARE THE CURRENT VERSIONS:

EVOLV - enhanced theme with elementary mode - Evolv

SQUAPE - enhanced theme with elementary mode - Squape

STATTQUALM - enhanced theme with elementary mode - StattQualm

SILVER - enhanced theme with elementary mode - EVOLV+LVE+Squape in one theme selectable

=================================================

- silver and  black versions are also available!
- too many details to list them; You will discover them in daily use and you will love them ...

The following logo combinations are available:
BLACK: Evolv_or_SQ_switchable
SILVER: Evolv or (Salix (profile1) + SQ (profile234) + Evolv (profile5678)) _ switchable
SILVER: Evolv or (SQ (profile1234) + LVE (profile5678)) _ switchable
SILVER: Evolv or LVE_switchable
SILVER: Evolv or SQ_switchable
SILVER: LVE or SQ_switchable

- SCARLET PASSION: Evolv_or_LVE_switchable
Thanks to Tortuga for the fantastic background graphics!

The "K.I.S.S.-Mode ON" mode addresses inexperienced users and is very simple,
the "K.I.S.S.-Mode OFF" mode is aimed at experienced users who want full control over their mod ...

SILVER_Theme_Evolv_DNA_75C_250C.png BLACK_StattQualm_Theme_Evolv_DNA_75C_250C.png

(some screens may have changed)

TC-Mode.png

wolke-101 hat hier einen sehr anschaulichen Beitrag zu den Unzulänglichkeiten des TC-Modus geschrieben - spannend.

REPLAY.png

Power-Mode.png


PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!

It works of course - but not in the sense of the developer ... 
The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.

BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.


What's New in Version INT_2.0_SP20_2-8   See changelog

Released

Scarlet Passion: Bug "Out of space" fixed

INT_2.0_SP20 _2-8:
- Navigation changed; "Round Robin" only on exit down, from main screen exit up to lock the device
- "New Atomizer" screen can be left in K.I.S.S.-OFF mode without any changes

INT_2.0_SP20 _2-7:
- Scaling of the battery indicators changed

INT_2.0_SP20 _2-5:
- minor changes in TC mode; Among other things, the peak temperature is displayed instead of the average temperature of the last puff
- Resistance setting back to 3 decimal places; 4 Decimal Places are nice in the lab, but not in daily use

INT_2.0_SP20 _2-2:
small bug fixes (screen error)

INT_2.0_SP20 _2-1:

BLACK:
- Bug PreHeat / Boost setting fixed

BLACK / SILVER:
Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
So I decided to optionally display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.

In the following standard topics, I have added a screen on which these dependencies can be observed well    PreHeat-Boost-Test.ecigtheme

Tja, die Anzeige der Preheat-Temperatur ist ja recht interessant, aber dies direkt einzustellen scheint sinnlos, da der Chipsatz in festen Schritten arbeitet. 
Soweit ich das Verhalten richtig deute, sind diese Schritte von der eingestellten Zieltemperatur abhängig, ebenso ist das Überschreiten der TC-Zieltemperatur im Preheat nicht möglich - selbst wenn die direkte Temperatureingabe etwas anderes suggeriert. Es existiert eine direkte Abhängigkeit zwischen Preheat-Temp und Preheat-Punch. 
Ich habe mich daher dazu entschieden, zwar wahlweise die (vom Chipsatz zugeordnete) Preheat-Temperatur anzuzeigen - die Einstellung geschieht jedoch als Preheat-Punch.
Sollte mir jemand für mich verständlich darlegen, dass meine Ausführungen falsch sind, gehe ich diesen Schritt natürlich zurück.

Im folgenden Standardtheme habe ich einen Bildschirm hinzugefügt, auf welchem siche diese Abhängikeiten gut beobachten lassen PreHeat-Boost-Test.ecigtheme

___________________________________________________________

INT_2.0_SP20 _2:

cell.png.de987fdaed6cf7ffd487cce461f8d721.png

____________________________________________________________

- Added some new logo combinations

INT_2.0_SP20 _1:
- new performance screen (only K.I.S.S.-Mode OFF)
- new coil setup screen
- "puff details" screen removed




User Feedback

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

emir71

Report ·

  

Hallo erste mal,

 

habe runtergeladen und getestet.Entscheidung positiv ✌️ 

Response from the author:

Probier bitte nie neue Version aus - lohnt sich und scheint stabil

Share this review


Link to review