JayFlair Posted March 14, 2016 Report Share Posted March 14, 2016 I've noticed the slow down and somewhat stuttering movement up and down the wattage now also, have to say it's really quite annoying, I hope a revised firmware is being written to cure that. Link to comment Share on other sites More sharing options...
James Posted March 14, 2016 Report Share Posted March 14, 2016 JayFlair, is your Watts Hold Increment 1W? The slow down is actually a speed up versus how fast it is adjusting 0.1W, just in larger chunks. Did you like the old, speed-up-quickly behavior better? Link to comment Share on other sites More sharing options...
blueridgedog Posted March 14, 2016 Report Share Posted March 14, 2016 I can't comment on the watt adjustment. All mine stay at 200w as I am a TC limit guy. Link to comment Share on other sites More sharing options...
Viruk Posted March 14, 2016 Report Share Posted March 14, 2016 James - as per my previous comment - I don't think the speed change makes sense when on a low (0.1/0.2) "watts hold increment", however when on 1w it makes much more sense and feels good. Both options work well - as long as the correct increment is selected for the setting. For me, the old method and a low increment worked well - but the new method and the higher increment is way better for large changes in wattage. Personally, I only changed to 0.2W increment to stop the wattage flying up or down at great speed; but I think I probably prefer the step down in speed and using 1w increment. Is it possible to get a setting in escribe to enable/disable that speed adjustment? Not an issue for me - but could be nice to have the option if it isn't hard (or problematic) to implement Link to comment Share on other sites More sharing options...
JayFlair Posted March 16, 2016 Report Share Posted March 16, 2016 Hey James, yes my watt hold increment is indeed the 1W option, I really don't see the point of the .1 or .2 increments anyway, I certainly don't need it so precise that it can enable me to vape at say 95.4W, personally I think 0.5 and 1 increments are fine and yes I for one much prefered the old silky smooth speed behaviour much better thanks. Link to comment Share on other sites More sharing options...
DRTMI Posted March 16, 2016 Report Share Posted March 16, 2016 surgum said: I would love to if my dna200 can show voltage of my wattage setting that before i press fire buttonThis please. What good does it do to show the applied voltage while you are vaping in wattage mode? You can't see the screen while vaping. Link to comment Share on other sites More sharing options...
ClintMaas Posted March 16, 2016 Report Share Posted March 16, 2016 Will the single cell firmware update be available when the hcigar DNA 75 is released or before? My device will have a 18650 option in the next couple weeks and am intrigued but the news of the DNA 75. Link to comment Share on other sites More sharing options...
black lace Posted March 17, 2016 Report Share Posted March 17, 2016 DRTMI said:This please. What good does it do to show the applied voltage while you are vaping in wattage mode? You can't see the screen while vaping.the elephant man can, lol Link to comment Share on other sites More sharing options...
Tristen1891 Posted March 17, 2016 Report Share Posted March 17, 2016 When will the next update be released ?? Link to comment Share on other sites More sharing options...
black lace Posted March 17, 2016 Report Share Posted March 17, 2016 Tristen1891 said:When will the next update be released ?? lol, if not a joke, we've only recently had one big one that quietened everyone down, what have you in mind? Link to comment Share on other sites More sharing options...
Wingsfan0310 Posted March 17, 2016 Report Share Posted March 17, 2016 black lace said: lol, if not a joke, we've only recently had one big one that quietened everyone down, what have you in mind?No kidding Black Lace, iirc there have been 3-4 updates in the last month. It's hard to keep up lolCheers,Steve Link to comment Share on other sites More sharing options...
black lace Posted March 17, 2016 Report Share Posted March 17, 2016 Probly been using 4 dna 200s now for about a year and have only updated firmwear on first connection to escribe & i was keen to download the user extras last month, but other than that i dont look, ((for me));; unless prompted by escrib, ((if it aint bust, dont fix it)) Link to comment Share on other sites More sharing options...
amsalvat Posted March 18, 2016 Report Share Posted March 18, 2016 would be amazing if we could control preheat temp settings and store battery profiles from the mod itself if running 18650's Link to comment Share on other sites More sharing options...
Willy Posted March 19, 2016 Report Share Posted March 19, 2016 James, Had a thought that some might find handy and maybe it's a feature that could be added at some point when your tinkering with the software. Being able to shut the charging off when hooked to escribe would be desirable at times when I'm playing with settings while connected to my Windows tablet/laptop, it would help save battery reserves of the tablet.Thank you sir! You the man! Link to comment Share on other sites More sharing options...
VapingBad Posted March 19, 2016 Report Share Posted March 19, 2016 Willy said:James, Had a thought that some might find handy and maybe it's a feature that could be added at some point when your tinkering with the software. Being able to shut the charging off when hooked to escribe would be desirable at times when I'm playing with settings while connected to my Windows tablet/laptop, it would help save battery reserves of the tablet.Thank you sir! You the man! You can set the USB current to zero in DM, under Diagnostics. Link to comment Share on other sites More sharing options...
Willy Posted March 19, 2016 Report Share Posted March 19, 2016 VapingBad said:You can set the USB current to zero in DM, under Diagnostics.Perfect! Thanks VB! You the man too! Link to comment Share on other sites More sharing options...
Dyagilets Posted March 20, 2016 Report Share Posted March 20, 2016 what the features of update? haven't even read its features before update... I have Mad Hatter v2 RDA with 2 coils of 1mm Kanthal with overall resistance 0.05 and 0.06 cold ohms..After update, on 90W(My Vaping on that Wattage and resistance in prev. firmware was allright with no micro-explosions and spitting and slow fire button reaction) its started to do micro-explosions with spitting from my RDA... I haven't seen that before that update and seems like my wismec dna200 started to react slowly on fire button with latest firmware.Whats the problem? is that all about my coil build with 0.05ohm resistance in WV mode ? Or just an update feature? If some one knows whats this all about, answer quickly pls, I'm still using that rda with 0.05ohm in WV mode!Just don't wanna brick and ruin my birthday present Link to comment Share on other sites More sharing options...
retird Posted March 20, 2016 Report Share Posted March 20, 2016 Go back to the previous firmware and see if the spitting goes away...if not look for something else, maybe rda related... Link to comment Share on other sites More sharing options...
Dyagilets Posted March 20, 2016 Report Share Posted March 20, 2016 retird said:Go back to the previous firmware and see if the spitting goes away...if not look for something else, maybe rda related... How to downgrade? Link to comment Share on other sites More sharing options...
VapingBad Posted March 20, 2016 Report Share Posted March 20, 2016 Dyagilets said: How to downgrade?Escribe - Tools - Firmware UpdateIt should take you to a folder where all the previous versions you have downloaded are. Link to comment Share on other sites More sharing options...
BryanG Posted March 21, 2016 Report Share Posted March 21, 2016 Why in the new eScribe is there an amp limit setting locked to 24? I thought the max on this device was 50. Every time I try to change it, it resets to 24. Is this just a bug or what? Essentially, I'm going to be pretty pissed off if what I bought has just been turned into a cuboid with minimally customizable screens and a lipo pack after I updated the firmware. I rolled it back just encase. I've also not updated any of my friends DNA's because we're in the same boat. Would appreciate an answer, Evolv. Link to comment Share on other sites More sharing options...
johndoe123 Posted March 21, 2016 Report Share Posted March 21, 2016 BryanG said:Why in the new eScribe is there an amp limit setting locked to 24? I thought the max on this device was 50. Every time I try to change it, it resets to 24. Is this just a bug or what? Essentially, I'm going to be pretty pissed off if what I bought has just been turned into a cuboid with minimally customizable screens and a lipo pack after I updated the firmware. I rolled it back just encase. I've also not updated any of my friends DNA's because we're in the same boat. Would appreciate an answer, Evolv.It is input current not output, just leave it as is. You still got 55 amps peak like before Link to comment Share on other sites More sharing options...
BryanG Posted March 21, 2016 Report Share Posted March 21, 2016 smartalec1020 said:It is input current not output, just leave it as is. You still got 55 amps peak like before Good deal. I didnt want to screw on a .07 to be greeted with like a 40 watt output. Appreciate the info. The constant re-locked to 24 made me think they were going to basically screw the super-sub-ohm people out there in favor of safety for all. We take calculated risks of our own volition building that low in power mode, but I didn't buy a device to nanny for me all of a sudden. Just had to make sure. Link to comment Share on other sites More sharing options...
VapingBad Posted March 24, 2016 Report Share Posted March 24, 2016 I have moved the posts about increasing the max power to http://evolvapor.forumchitchat.com/post?id=8052007 Link to comment Share on other sites More sharing options...
Kresell Posted March 28, 2016 Report Share Posted March 28, 2016 With the new firmware what's the purpose of holding all three buttons.Is it just to quick change to different wire types on the fly and not use profiles? Or if you had more than 8 setup already? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now