Jump to content
Evolv DNA Forum

Settings

39 files

  1. Lost Vape Therion DNA 75C

    By Jasonvillamil

    This is a fully configured Escribe settings file for the new Lost Vape Therion DNA 75C. The mod basically came unconfigured at the stock board settings which was surprising. This config file has been meticulously configured, and includes the following highlights:
    All 8 profiles configured, with: 3 temp control profiles for favorite atomizer and build combos. My go-to is the Pharaoh RTA as the primary profile, plus the Crown III and the SMOK Baby Beast for emergencies while traveling 5 power-only profiles, at presets of 35, 40, 45, 50 watts Includes my posted DNA 75C Enhanced Default Theme v2.2 which greatly expands the stock theme's capabilities Standard materials plus two SS316L materials, one curve and one TCR set at 0.00094 Mod fully configured: Battery Analyzer run for dual HohmTech Life 3000mah 18.04wh 18650's Cell Soft Cutoff set to lower limit of these 18650's at 2.9v to protect the batteries Input currents set for battery safety based on Mooch's test results Output currents set at DNA 75C spec sheet typical rating Mod internal resistance measured with copper plug at 0.004 ohms Case Analyzer run at 73 degF ambient, averaged over 3 runs Hope everyone enjoys!
     

    3,383 downloads

       (1 review)

    15 comments

    Updated

  2. NEW ORIGINAL SETTINGS 2019 LOST VAPE PARANORMAL DNA250C

    By 𝘉𝘭𝘢𝘤𝘬𝘚𝘺𝘴𝘵𝘦𝘮𝘺97

    LOST VAPE DEFAULT SETTINGS PARANORMAL DNA250C 2019

    1,969 downloads

       (0 reviews)

    0 comments

    Updated

  3. Evolv DNA 250 Set

    By Tugnick

    General escribe goodies.
    Case's Thermal balanced
    Check out, lipo Discharge Graph on soft Cutoff too!
    Long life, Puff oriented. Have fun

    1,888 downloads

       (0 reviews)

    2 comments

    Submitted

  4. Evolv DNA 75 Color Default Settings

    By James

    These are the default settings for the Evolv DNA 75 Color.

    1,607 downloads

       (0 reviews)

    0 comments

    Submitted

  5. Lost Vape Mirage DNA 75C

    By Jasonvillamil

    This is a fully configured Escribe settings file for the new Lost Vape Mirage DNA 75C. Highlights:
    All 8 profiles configured, with: 3 temp control profiles for favorite atomizer and build combos. My go-to is the Pharaoh RTA as the primary profile, plus the Crown III and the SMOK Baby Beast for emergencies while traveling 5 power-only profiles, at presets of 35, 40, 45, 50 watts Includes my posted DNA 75C Enhanced Default Theme v2.2 which greatly expands the stock theme's capabilities Standard materials plus two SS316L materials, one curve and one TCR set at 0.00094 Mod fully configured: Battery Analyzer run for iJoy 21700 3750 mAh 40A battery Cell Soft Cutoff set to 2.75V, max sustained discharge at 24A, max peak discharge at 35A for longer cell life Output currents set at DNA 75C spec sheet typical rating Mod internal resistance at 0.0031 ohms, measured with copper plug (actual 0.004 x 80%, minus an extra 0.1 mOhm for kick(s) Built for EScribe Suite International v2.0 SP12 or higher, running beta firmware  v1.1 SP27 or higher Hope everyone enjoys!

    1,497 downloads

       (2 reviews)

    4 comments

    Updated

  6. Lost Vape Paranormal DNA166 (Evolv DNA 250)

    By iAlexander

    This is the stock .ecig file for theLost Vape Paranormal DNA 166 (Evolv DNA 250), 2 x 18650 batteries mod, providing manufacturer/original configuration as it was out of the box.
    Also have attached separately the original Lost Vape Theme file.

    1,458 downloads

       (2 reviews)

    1 comment

    Updated

  7. Lost Vape Centaurus DNA250C default settings

    By Akos

    Default escribe settings of Lost Vape Centaurus DNA250C mod.

    1,260 downloads

       (0 reviews)

    0 comments

    Submitted

  8. Thelema DNA250c Stock config/settings

    By Lanzarotechris

    Just unpacked my new DNA device which arrived today!
    This is out-of-the-box settings from the device.
    Have fun ;-))
    Production History Monday, November 2, 2020, 3:12 PM @ Shenzhen, Guangdong, China   Mod configured Tuesday, October 13, 2020, 12:11 PM   Board programmed

    856 downloads

       (0 reviews)

    0 comments

    Submitted

  9. Hcigar VTinbox BF DNA 75 V_23112017

    By Kronos

    HCIGAR VT Inbox DNA 75 by Kronos Version V_23112017
    V1.0 : Settings on Stainless Steel 316 Dual Coils setup w/ Bottom Feed Atom
    features: Temperature control & Wattage control
    Profiles:
    1- ROCK / ROCK- SS316 TC=240C Power=40W Punch=5 PreHeath=50W (temperature dominant)
    2- ROLL / ROLL- SS316 TC=240C Power=45W Punch=6 PreHeath=55W (temperature dominant)
    3- HELL / HELL- SS316 TC=260C Power=55W Punch=7 PreHeath=65W (temperature dominant)
    4- PUMP / PUMP- SS316 TC=280C Power=65W Punch=8 PreHeath=75W (temperature dominant)
    5- ACID / ACID- SS316 TC=275C Power=50W Punch=9 PreHeath=75W (temperature dominant)
    6- POWER CONTROL / PWCT- SS316 TC= no  Power=70W Punch=0 PreHeath=no
    7- RELAXED / CALM- SS316 TC=250C Power=50W Punch=5 PreHeath=60W
    8- NO PREHEAT / NOPH- SS316 TC=250C Power=75W Punch=1 PreHeath=1W
     
    main design: apple style logo/font (three rows)
    preferred with: Flavour chasing / Cloud chasing
    author: KRONOS (link: https://www.facebook.com/KR0NOS )
    club: GIAMBELLINO VAPERZ (link: https://www.facebook.com/groups/Giambevaperz/ )
    city: MILANO
    state: ITALY
    nation: EUROPEAN UNION

    766 downloads

       (0 reviews)

    0 comments

    Updated

  10. Lost vape Paranormal DNA75C

    By Frank65

    Original Lost Vape Paranormal DNA75C stock settings (.ecig file)
     

    750 downloads

       (0 reviews)

    0 comments

    Updated

  11. Think Vape Finder DNA 250C default .ecig file

    By maximumsport

    Default file values for the Think Vape Finder 250C 
     

    692 downloads

       (0 reviews)

    1 comment

    Submitted

  12. Volcano Lavabox M (Mini) DNA 75 Stock Settings (Out of the box)

    By AussieGeekVaper

    This is the stock .ecig file for the Volcano Lavabox M (Mini) DNA 75 1650 mod, providing manufacturer/original configuration as per out of the box.

    613 downloads

       (0 reviews)

    0 comments

    Submitted

  13. Paranormal 250C Default

    By Gavnaf

    Default settings

    602 downloads

       (0 reviews)

    0 comments

    Submitted

  14. Lost Vape Triade DNA250c profile after resistance and case analyzer tests

    By slash1981

    Lost Vape Triade DNA250c settings (.ecig) after case analyzer and resistance tests on triple VTC6.
    Battery Analyzer run for triple Sony VTC6 3000mah 17.899wh Cell Soft Cutoff set to lower limit of these 18650's at 2.75v Mod internal resistance measured with copper plug at 0.006 ohms Case Analyzer run at 73F ambient.

    567 downloads

       (0 reviews)

    13 comments

    Submitted

  15. my_default_dna200

    By EvgehaGl

    work backup

    538 downloads

       (0 reviews)

    0 comments

    Submitted

  16. Dovpo Odin 250c Default Settings

    By M666

    Default escribe settings of Dovpo Odin mod.

    510 downloads

       (0 reviews)

    0 comments

    Updated

  17. Jac Vapour Series B DNA75 Default/stock settings

    By Wayneo

    Full setup by Jac Vapour for their DNA75 SeriesB, including;
    Battery curve for Samsung 25R
    Thermal calibration
    Internal mod resistance set.
     

    483 downloads

       (1 review)

    0 comments

    Submitted

  18. ZQ Essent DNA75C Factory Settings

    By Sherman

    ZQ Essent DNA75C Factory Settings

    458 downloads

       (1 review)

    0 comments

    Submitted

  19. Lost Vape Drone DNA 167 BF mod Settings

    By ed101

    Settings file for the Lost Vape Drone DNA 167 BF mod. Battery analyser run for a pair of Sony VTC5A's. Material profiles from SteamEngine.

    441 downloads

       (0 reviews)

    0 comments

    Submitted

  20. Lavabox 75 - Tweaked SS316 Settings

    By Fadelio

    I tweaked the settings on my lavabox M DNA 75 chip after running the case analyzer.  Please post your changes/ comments. 
    Variables: 
    Lavabox 75 M - DNA 75 Chip
    Geekvape Ammit single coil
    Stainless Steel 26 gauge (from Master of Clouds)
    Sony VTC5 Battery 

    439 downloads

       (0 reviews)

    5 comments

    Submitted

  21. Lost Vape Paranormal DNA75C after test

    By Frank65

    Lost Vape Paranormal DNA75C settings (.ecig) after case analyzer , resistence test and VTC6 battery test.
    Battery Analyzer run for dual Sony VTC6 3000mah 17.899wh Cell Soft Cutoff set to lower limit of these 18650's at 2.75v Mod internal resistance measured with copper plug at 0.015 ohms Case Analyzer run at 70 degF \ 21 °C ambient, average over 3 runs Materials and profiles as per my personal use

    428 downloads

       (0 reviews)

    0 comments

    Updated

  22. Vapor Shark DNA 250 Settings

    By dclanz

    Here is the default config for the Vapor Shark DNA 250

    426 downloads

       (0 reviews)

    0 comments

    Submitted

  23. Paranormal 75c stock settings

    By Dimrx

    This is the stock .ecig file for the Lost Vape Paranormal 75C 

    414 downloads

       (0 reviews)

    0 comments

    Submitted

  24. VapeCige VTbox 250 Settings

    By dclanz

    Here is the default config file for the VapeCige VTBox 250. Please note that none of the profiles are configured properly by default (most are set to nickel and titanium, that's how I got it) so if you use it, be sure to go through and set the presets to your liking.

    401 downloads

       (0 reviews)

    0 comments

    Submitted

  25. Lost Vape Thelema Solo DNA 100C factory settings

    By f3rs3n

    Default factory Escribe settings for the Lost Vape Thelema Solo DNA 100C, bought on November 2022.

    344 downloads

       (0 reviews)

    0 comments

    Submitted

×
×
  • Create New...