Search the Community
Showing results for tags 'evolv'.
Found 14 results
-
-
I have a Lost vape Orion it's a week old. When I press the fire button I get a purple blinking light , It blinks once. When I let off the fire button it blinks again. I've tried a new pod. Nothing....pod seems to be making a connection. I try pressing the button 5 times...nothing....help any ideas ? VID_20190128_185711762.mp4
-
Version 3.3
2,246 downloads
Several modifications keeping the overall default Evolv theme look. Main screen "Firing" now red when firing as well as all menu or status bars. On main screen when not in active Replay saved puff you can select the ohm reading to shortcut you to the Coil Info screen. Settings changed to Menu for new menu / settings platform Most "Back" buttons removed and scroll up of down off the screen to go to the previous screen. Watts now adjustable in 1 watt increments instead of .1. Temp adjustable in 5 degree increments. New menu platform dived into Profile, Puff Info, Coil Info and Settings on main menu. New coil install screen now has cold ohm temp for new coil and old coil resistance and temp when deciding on new coil or keeping old settings. Profile Menu has added cold ohm temp with current ohm reading and coil material setting added. Also added is the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active. Puff Info screen enhanced with chart and ability to change wattage and or temp for dialing in a perfect puff. Also the addition of several live readings of the last puff. Live ohms, room temp,average power, puff duration, puff volts, puff amps, and average puff temp, and max puff temp when in temp control. When a non-temp sensing coil is installed gives you current battery % instead of temp. Recording Screen with new additions to be able to monitor with every puff. New Coil Info screen added with time, battery %, current profile, coil material, cold ohms, live ohms, coil temp, ability to remeasure resistance, and ability to lock ohms. New settings menu with System, Display, Device, and About. System gives you date, time, 12 / 24 hr, F or C temp, max puff time and serial number. New Display menu has brightness adjustment, always on, stealth level, auto lock, auto lock time out, and # of clicks to lock, and ability to set unlock device sequence. Device screen now has power bank settings, and battery voltages for up to 4 batteries. About Menu with Lifetime puff count, Theme revision, current firmware, current revision, edition, current puff count, puff count total energy, and reset to take you to a rest statistics screen. Thanks to everyone on the Evolv forum for ideas and themes to give me inspiration for this theme! Evolv Default Enhanced 250C.ecigtheme -
not charging DNA Go board manufacturered after October with charging issue
Thebigjim posted a topic in General Discussion
I see most of the issues were on boards programmed before October but this is happening to mine which was made in October. Is it the same issue? -
-
-
-
-
Version 1.0.0
6,532 downloads
Evolv version of my Therion theme, for other DNA75C devices. carbon: blue: leather: red (or orange/purple/pink/whatever): white: . -
Version 1.0.9
168 downloads
This is the Evolv default theme with the addition of Therion logo on lock screen and wallpaper and expanded functionality. - System screen expanded - Units screen added - About screen expanded - Puff Info/Recording expanded - Settings expanded - Board screen added - Resistance screen added - Preheat screen added - Battery screen added - Puffs screen added - New Atomizer screen expanded -
Version 1.1.1
145 downloads
This is the Evolv default theme with the addition of Therion logo on lock screen and expanded functionality. Added Device Monitor parameters, added Resistance screen, added Preheat screen, updated System and About screens. More features coming... -
Version 1.0.3
278 downloads
A newer better UI system: (I fowled up the last theme so here's a newer version) Here is a theme I made up of all bits and pieces of other themes, hence the name. Its pretty simple as I made it so I could see it better with my cheater glasses lol, basically its just a tad brighter and utilizes bigger fonts. In Device Monitor mode, highlight the arrows and use the middle select button to move your stats either forward or backwards. Its basic and simple but I find it easer to see and use, hope you all enjoy it. -G- -
Just got the Evolv 250 today and downloaded escribe and everything. As the main factor on the screen (the big one) it's giving me the option to change the temperature instead of the watts. I've figured out how to change the watts (lock the screen, hold down the buttons) but I don't want to have to go through that process every time I want to change the watts, especially when changing the temp is pretty useless to me. I can't find a way to change it on escribe. On there it looks like the watts should be on the main screen. How do I change this??
-
