Search the Community

Бонус! Добавлена стандартная тема на русском . Основная тема, бюджет на базе тем Frank65, начиналась с переделки темы Френка под себя, в результате были переделаны и исправлены практически все функции и режимы, кардинально изменена навигация по меню. , Все функции работают более корректно, полностью автоматизированы в работе и переключении режима, по просьбам коллег не переведены некоторые названия, которые являются принятыми сленгом во всем мире, все интуитивно понятно, подсказки по каждой функции на русском. Английская версия здесь Э то моя самая сложная, рассчитанная на опытных пользователей, тема. Более подходит для DNA 250c на трех аккумуляторах. После перегрева кнопки кнопки добавили температуру при вводе главном отдельном окне (так же добавленное отображение времени (при нажатии фаер) / заряда батарейки в поле сообщениями платы (Включается кнопка (верхний правый угол экрана Главного экрана)) На экране USB и Powerbank добавлено изменение цвета цифр при большом нагреве, и описание работы (заряд / разряд / работа) Тема построена так, чтобы не вчитываться в цифры и значки, а по цветовому оформлен видеть опасное состояние мода Доступ к развернутым настройкам температуры, мощности, преднагрева (тип преднагрева и режим Warmith) прямо с главного экрана. Подсказки на РУССКОМ для простоты использования настроек Быстрый доступ к глубоким настройкам сопротивления прямо с главного экрана. Возможность корректировки «комнатной» температуры для более гибкой настройки холодного сопротивления. В меню сопротивления (переход с главного экрана, выбор поля сопротивления) возможно включение / выключение режима REPLAY для термоконтрольных материалов , не зависимо был разрешен REPLAY для данного профиля в Escribe. Добавлено условие- для воспроизведения необходимо отключить переключатель термозащиты (без этого условия режим воспроизведения работал не всегда корректно) и включить переключатель Replay, который станет активным после отключения температурной защиты. При отключении термозащиты мод автоматически переходит в режим Ватт. Доступ ко всем настройкам мода из одного меню На вкладке Графики отображения времени и даты затяжек Увеличенный функционал режима Replay и термоконтроль Смена оформления при выборе опасных настроек Увеличенная разрядность для более точного контроля параметров работы мода Переключение шага регулировки 0,1, 0,5, 1, 5 Ватт и 1 ° C или 5 ° C Простая навигация, без многоярусных переходов, возврат на главный экран из любого вкладки, возврат на предыдущий экран- удержание кнопки "вверх", возврат на главный экран, удержание кнопки "вниз", либо выбор поля Status / При зарядке, на главном экране вместо индикатора батареи отображается ток заряда (при выделении иконки батареи) Режим Power bank стабилизирован и работает отлично Настолько развернутые термоконтроля я объяснял в своих публикациях

default DNA theme with little changes. now it is in blue and red with puff counter. compatible with dna75c/100c/250c.

Finally! The Odin Mini DNA75C default theme. As shipped to customers. I do not own one, and only posting this so it shows up properly here for others. Features: A beautiful Pink Skull wallpaper sitting atop the standard default Evolv theme. Pretty in Pink to attract women and men comfortable in their masculinity. But that's not all. Many standard mod/theme messages are now Bogan stylie, the same as if he's saying them to you. You say juvenile, I say edgy! DON'T WAIT, DOWNLOAD NOW. Enjoy!

Based on the "Evolv Default Enhanced 250C Theme 3.5" from JMat76, I created this SILVER version. In addition to a few small graphics changes, I have modified the lockscreen and mainscreen - but it can be switched to the original look. In the following I quote directly the theme description from the author JMat76: - Several modifications keeping the overall default Evolv theme look. -Main screen "Firing" now red when firing as well as all menu or status bars. - On main screen when not in active Replay saved puff you can select the ohm reading to shortcut you to the Coil Info screen. - Settings changed to Menu for new menu / settings platform - Most "Back" buttons removed and scroll up of down off the screen to go to the previous screen. - Watts now adjustable in 1 watt increments instead of .1. - Temp adjustable in 5 degree increments. - New menu platform dived into Profile, Puff Info, Coil Info and Settings on main menu. - New coil install screen now has cold ohm temp for new coil and old coil resistance and temp when deciding on new coil or keeping old settings. - Profile Menu has added cold ohm temp with current ohm reading and coil material setting added. Also added is the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active. - Puff Info screen enhanced with chart and ability to change wattage and or temp for dialing in a perfect puff. Also the addition of several live readings of the last puff. Live ohms, room temp,average power, puff duration, puff volts, puff amps, and average puff temp, and max puff temp when in temp control. When a non-temp sensing coil is installed gives you current battery % instead of temp. - Recording Screen with new additions to be able to monitor with every puff. - New Coil Info screen added with current profile, coil material, cold ohms, live ohms, coil temp, ability to remeasure resistance, and ability to lock ohms. - New settings menu with System, Display, Device, and About. - System gives you date, time, 12 / 24 hr, F or C temp, max puff time and serial number. - New Display menu has brightness adjustment, always on, stealth level, auto lock, auto lock time out, and # of clicks to lock, and ability to set unlock device sequence. - Device screen now has power bank settings, and battery voltages for up to 4 batteries. - About Menu with Lifetime puff count, current firmware, current revision, edition, puff count total energy, and reset to take you to a rest statistics screen. Also take a look at my own Themes, especially Enhanced 2 in 1 "LOST VAPE" - Four colors

This is the default evolv theme, just a bit enhanced.

Default escribe settings of Dovpo Odin mod.

Basically just a custom default theme that's simplified with a beautiful cyan blue color. Default Custom(Cyan) by Jkronicle

Several modifications keeping the overall default Evolv theme look. Main screen "Firing" now red when firing as well as all menu or status bars. On main screen when not in active Replay saved puff you can select the ohm reading to shortcut you to the Coil Info screen. Settings changed to Menu for new menu / settings platform Most "Back" buttons removed and scroll up of down off the screen to go to the previous screen. Watts now adjustable in 1 watt increments instead of .1. Temp adjustable in 5 degree increments. New menu platform dived into Profile, Puff Info, Coil Info and Settings on main menu. New coil install screen now has cold ohm temp for new coil and old coil resistance and temp when deciding on new coil or keeping old settings. Profile Menu has added cold ohm temp with current ohm reading and coil material setting added. Also added is the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active. Puff Info screen enhanced with chart and ability to change wattage and or temp for dialing in a perfect puff. Also the addition of several live readings of the last puff. Live ohms, room temp,average power, puff duration, puff volts, puff amps, and average puff temp, and max puff temp when in temp control. When a non-temp sensing coil is installed gives you current battery % instead of temp. Recording Screen with new additions to be able to monitor with every puff. New Coil Info screen added with time, battery %, current profile, coil material, cold ohms, live ohms, coil temp, ability to remeasure resistance, and ability to lock ohms. New settings menu with System, Display, Device, and About. System gives you date, time, 12 / 24 hr, F or C temp, max puff time and serial number. New Display menu has brightness adjustment, always on, stealth level, auto lock, auto lock time out, and # of clicks to lock, and ability to set unlock device sequence. Device screen now has power bank settings, and battery voltages for up to 4 batteries. About Menu with Lifetime puff count, Theme revision, current firmware, current revision, edition, current puff count, puff count total energy, and reset to take you to a rest statistics screen. Thanks to everyone on the Evolv forum for ideas and themes to give me inspiration for this theme! Evolv Default Enhanced 250C.ecigtheme Evolv Default Enhanced 250C.ecigtheme

*CUSTMDEFAULTTHEME*DEDICATO AL SANTONE DELLO SVAPO*(ITA)

LOST VAPE DEFAULT SETTINGS PARANORMAL DNA250C 2019

*CUSTMDEFAULTTHEME*

Default settings

The first thing I did after receiving my new Steam Engine is backup the theme. This is it.

This is the default theme for the Evolv DNA 75 Color. It is designed to be easy to learn and use, and to let you to fire from most screens.

This is the Evolv default theme with the addition of Therion logo on lock screen and wallpaper and expanded functionality. - System screen expanded - Units screen added - About screen expanded - Puff Info/Recording expanded - Settings expanded - Board screen added - Resistance screen added - Preheat screen added - Battery screen added - Puffs screen added - New Atomizer screen expanded

This is the Evolv default theme with the addition of Therion logo on lock screen and expanded functionality. Added Device Monitor parameters, added Resistance screen, added Preheat screen, updated System and About screens. More features coming...

These are the default settings for the Evolv DNA 75 Color.