Rob_H Posted August 8, 2016 Report Share Posted August 8, 2016 KTMRider said:I have 5 DNA200, 3 DNA75 and 4 DNA40 in rotation. None of my mods are set higher than 30w and most are set to 25w. LOL I have two Dna200's and 4 Dna40's and the highest any of them are set is 35w. I plan on modding out two of my Hana Dna40's and put Dna60's in them so I can still vape under 35w haha. Link to comment Share on other sites More sharing options...
KTMRider Posted August 8, 2016 Report Share Posted August 8, 2016 I've bought and sold a few DNA40's (and a couple of SX350 mods) but I've kept all my DNA200 and DNA75 mods. Here's 2 DNA40's I built and still use (Cloupor clone and Fasttech mini clone). The 2 other DNA40's are VS DNA40 and rDNA40: Link to comment Share on other sites More sharing options...
Rob_H Posted August 8, 2016 Report Share Posted August 8, 2016 KTMRider said:I've bought and sold a few DNA40's (and a couple of SX350 mods) but I've kept all my DNA200 and DNA75 mods. Here's 2 DNA40's I built and still use (Cloupor clone and Fasttech mini clone). The 2 other DNA40's are VS DNA40 and rDNA40:Those are nice mods you did I think I may have seen these over on ECF a long time ago. Not in this picture is a Dna133 I did in a Modcrate enclosure its one page back from where we are. And a Hana V4 mini Dna40. Link to comment Share on other sites More sharing options...
CrookedPenguin Posted August 8, 2016 Report Share Posted August 8, 2016 KTMRider said:The Evolv chipset will give you the best vape. The only mod that comes close is the Vaporesso Target Mini. I got a couple of Picos and after a few days with one, they're both back in their box. Not impressed at all with them.I don't have a Target mini but have you ever used an Artery Vapor Nugget in TC mode? They're surprisingly nice as well. I've not used all that many mods but out of the ones I have experience with it's the closest thing to what the VT200 gives me.I'm still trying to decide between the SMY SDNA and the VT75 Nano. I like the looks of the SMY better but the Nano would give me the ability to run larger RTAs. Maybe I'll just wait and see if anything else comes out this summer, although seeing what date it is we might have seen all the new ones to come out this year already.. Link to comment Share on other sites More sharing options...
Spirometry Posted August 8, 2016 Report Share Posted August 8, 2016 KTMRider said:I've bought and sold a few DNA40's (and a couple of SX350 mods) but I've kept all my DNA200 and DNA75 mods. Here's 2 DNA40's I built and still use (Cloupor clone and Fasttech mini clone). The 2 other DNA40's are VS DNA40 and rDNA40:I see a DNA 60 in your future. Link to comment Share on other sites More sharing options...
CrookedPenguin Posted August 9, 2016 Report Share Posted August 9, 2016 Link to comment Share on other sites More sharing options...
maniu Posted September 28, 2016 Report Share Posted September 28, 2016 Quick DIY DNA200 Link to comment Share on other sites More sharing options...
jdlockwood Posted October 7, 2016 Report Share Posted October 7, 2016 Just finished my 200, first mod I've built. Did a lot of research and ended up going with a Alpinetech B box, Mitech switch, XT30, MaxAmps 2250, Varitube V1. Next id going to be a DNA 250 in a G+ box... Link to comment Share on other sites More sharing options...
Esignorelli Posted October 12, 2016 Report Share Posted October 12, 2016 tomdunahoo@gmail.com said:That is a Alpinetech G+ box and mine the silver one is a alpinetech G. That is also a Mamu face plate. I am looking at doing more on a limited edition one of a kind. They cost me about a pretty penny for just parts. That one sold for 240.00 with warranty. Thanks. I try to make them different than every other cookie cutter design out there. I am adding billet buttons and stainless buttons as options as well as larger batteries. I'd be more than willing to pay that for a box like that. How do I order? Link to comment Share on other sites More sharing options...
John la Posted October 27, 2016 Report Share Posted October 27, 2016 I have not finished this box yet think I'm going to go with a blue kandy maybe a red kandy green is really nice too. Thought I'd share this halfway done pic make someone a little jealous so pulled the board from a hcigar vt200 (fire button was going) put it in a g box with 16mm led switch, v2 varitube, and drilled out the + - and used the hcigar buttons, 1300 lipo led switch takes up alot of room maybe a mitech switch next time. Next once the box comes in will be a dna 250 in the gbox. Ps dna 75 in the p box is the other mod in the pic. Link to comment Share on other sites More sharing options...
Spygoat Vapes Posted October 28, 2016 Report Share Posted October 28, 2016 My Boxer DNA200 and Sammy Gordon stab wood DNA200 Link to comment Share on other sites More sharing options...
Frogmod Posted October 31, 2016 Report Share Posted October 31, 2016 I decided to update my 200 by adding some knife clips and a fast 5A charging port. (like on my 1590B) the battery can handle a 5C charge so I'm safe there. charge time takes 20mins from the weak battery display. this add-on mod is so worth it on a vemon 1300Mah battery. Link to comment Share on other sites More sharing options...
Rob_H Posted November 1, 2016 Report Share Posted November 1, 2016 Frogmod said:I decided to update my 200 by adding some knife clips and a fast 5A charging port. (like on my 1590B) the battery can handle a 5C charge so I'm safe there. charge time takes 20mins from the weak battery display. this add-on mod is so worth it on a vemon 1300Mah battery. So how did you wire inside the device to run a 5amp charger. Are you still plugging into the stock location or did you run a remote usb.edit: I see the plug now in the first image. Link to comment Share on other sites More sharing options...
John la Posted November 2, 2016 Report Share Posted November 2, 2016 Here it is...... so much prettier in person Link to comment Share on other sites More sharing options...
Frogmod Posted November 5, 2016 Report Share Posted November 5, 2016 Rob_H said:So how did you wire inside the device to run a 5amp charger. Are you still plugging into the stock location or did you run a remote usb.edit: I see the plug now in the first image.https://forum.evolvapor.com/topic/66841-topic/?do=findComment&comment=901299 this will show you how I connected it up. its the same set up as the 1590 G+ Link to comment Share on other sites More sharing options...
PreciseCreation Posted November 7, 2016 Report Share Posted November 7, 2016 Been working on this one for the last month or so. Between the design time/revision process was about 2-3weeks than another week of finishing the wood and the actual build Compound DNA mixed materials with walnut, stabilized maple burl, 3d printed internal board mount, and stainless steel hardware. Link to comment Share on other sites More sharing options...
UKDTweak Posted February 23, 2017 Report Share Posted February 23, 2017 Got board last night, had a spare DNA200 with a blown fuse, i got replacement fuses but could not desolder the old fuse, so instead i added in a 25a blade fuse to the battery positive lead, then got the box my Moonshot tank came in and set about building it into a Dual 18650 DNA... she aint pretty, but she works. Link to comment Share on other sites More sharing options...
Asmodeus Posted February 23, 2017 Report Share Posted February 23, 2017 I almost did that. I have 3 moonshot tins, and thought of sacrificing one to build a mod out of. Neat stuff! Link to comment Share on other sites More sharing options...
UKDTweak Posted February 25, 2017 Report Share Posted February 25, 2017 Moonshot... on the Moonshot mod... Link to comment Share on other sites More sharing options...
Wayneo Posted February 25, 2017 Report Share Posted February 25, 2017 @UKDTweak ....... Now that's gotta be the ultimate matchy matchy! Link to comment Share on other sites More sharing options...
Nykademos Posted February 25, 2017 Report Share Posted February 25, 2017 UKDTweak said:Moonshot... on the Moonshot mod... I have eyed my moonshot box 100 times thinking of this, but with a maxamps 1800. Very nice sir! Here are some of my babies, Link to comment Share on other sites More sharing options...
UKDTweak Posted February 27, 2017 Report Share Posted February 27, 2017 Nice collection there Nykademos Ive since tried to hide some of my bad cutting and the wires with a wee cover and Faux carbon wrap.And here my overall DNA collection, from DNA40, 75, 133, 200 and 250w, all the DNA40 were home made (4 on the left) as were some of the bigger mods. Link to comment Share on other sites More sharing options...
dwcraig1 Posted March 1, 2017 Report Share Posted March 1, 2017 Against my better judgment I will post this, my friend bought a 3D printer and made this box for me. So I built it. 1 Link to comment Share on other sites More sharing options...
retird Posted March 1, 2017 Report Share Posted March 1, 2017 Link to comment Share on other sites More sharing options...
Wayneo Posted March 1, 2017 Report Share Posted March 1, 2017 @dwcraig1 What material did you use to print it? I'd rock that color scheme. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now