maximumsport Posted November 19, 2018 Report Share Posted November 19, 2018 SP19 will be out soon officially? Link to comment Share on other sites More sharing options...
HolmanGT Posted November 19, 2018 Report Share Posted November 19, 2018 maximumsport Are you asking or telling us SP19 is just down the road? Link to comment Share on other sites More sharing options...
maximumsport Posted November 20, 2018 Report Share Posted November 20, 2018 Asking... I saw a link for it on another third party group saying it's out. But didn't see anything officially here. So I was just wondering if its in final stages? Thanks! Link to comment Share on other sites More sharing options...
HolmanGT Posted November 20, 2018 Report Share Posted November 20, 2018 OK, Now you have me looking high and low for it... Link to comment Share on other sites More sharing options...
maximumsport Posted November 20, 2018 Report Share Posted November 20, 2018 Haven't personally installed and used it yet. Waiting to hear from James. Here you go: EScribe Suite 2.0 SP19 SP19 fixes: — DNA 250 Color (firmware 1.1 SP38) — Fixed a firmware crash that could occasionally come up when the device had been idle for a while. Fixed spurious Temperature Protected errors that could crop up in certain high-CPU themes with Replay off. — DNA Go (firmware 1.1 SP38) — Fixed a firmware crash that could occasionally come up when the device had been idle for a while. — EScribe — In Display tab -> Device Monitor, ‚Remove Readout‘ no longer crashes. — Production Utility — Firmware -> Browse no longer crashes. DNA Go now does Fire Tests correctly. Mac: http://pc.cd/j0z Win: http://pc.cd/d6N Link to comment Share on other sites More sharing options...
tennisguru1 Posted November 20, 2018 Report Share Posted November 20, 2018 1 hour ago, maximumsport said: Haven't personally installed and used it yet. Waiting to hear from James. Here you go: EScribe Suite 2.0 SP19 SP19 fixes: — DNA 250 Color (firmware 1.1 SP38) — Fixed a firmware crash that could occasionally come up when the device had been idle for a while. Fixed spurious Temperature Protected errors that could crop up in certain high-CPU themes with Replay off. — DNA Go (firmware 1.1 SP38) — Fixed a firmware crash that could occasionally come up when the device had been idle for a while. — EScribe — In Display tab -> Device Monitor, ‚Remove Readout‘ no longer crashes. — Production Utility — Firmware -> Browse no longer crashes. DNA Go now does Fire Tests correctly. Mac: http://pc.cd/j0z Win: http://pc.cd/d6N Can I update my Lavabox M DNA 75 with this firmware also? Link to comment Share on other sites More sharing options...
Wayneo Posted November 20, 2018 Report Share Posted November 20, 2018 @tennisguru1 Simple Answer: No, as it's not mentioned at all above. Long answer: The DNA75 only ever needed 1 update which was named and released 2016-06-05. You can see your current firmware version in 'Device Monitor', lower right hand corner 1 Link to comment Share on other sites More sharing options...
fwa Posted November 20, 2018 Report Share Posted November 20, 2018 il y a 45 minutes, Wayneo a dit : @tennisguru1 Simple Answer: No, as it's not mentioned at all above. Long answer: The DNA75 only ever needed 1 update which was named and released 2016-06-05. You can see your current firmware version in 'Device Monitor', lower right hand corner And what about the DNA Go update ? Just buy one….don't want to brick it with the update, but also does not want to brick it with the idle state problem…. Link to comment Share on other sites More sharing options...
maximumsport Posted November 29, 2018 Report Share Posted November 29, 2018 Just wanted to report: EScribe Suite 2.0 SP19 also lags like SP18 on Mac. No matter what DNA250C mod I use. Device manager runs really slow on graphing and lags inputs on clicks. SP17 still runs smooth all around with no lags. No idea what was changed in 18 but that has caused big lagging on Mac software. Link to comment Share on other sites More sharing options...
RowdyLowdy Posted November 29, 2018 Report Share Posted November 29, 2018 working well on Mojave. Link to comment Share on other sites More sharing options...
fwa Posted November 29, 2018 Report Share Posted November 29, 2018 SP19 INT apply on DNA250C and GO…..no problems under Windows…. Link to comment Share on other sites More sharing options...
vaperneto Posted November 30, 2018 Report Share Posted November 30, 2018 SP19 INT, Lost Vape Triade 250c, Error Press Up still happening Link to comment Share on other sites More sharing options...
James Posted November 30, 2018 Report Share Posted November 30, 2018 @vaperneto, what firmware version is the 250C running? Link to comment Share on other sites More sharing options...
vaperneto Posted November 30, 2018 Report Share Posted November 30, 2018 2 horas atrás, James disse: @vaperneto, what firmware version is the 250C running? Hi James, Firm 1.1 SP38 INT Thanks Link to comment Share on other sites More sharing options...
James Posted December 3, 2018 Report Share Posted December 3, 2018 When does Error Press Up happen for you on SP38? Is it after it has slept for a while, during firing, or..? Thanks! Link to comment Share on other sites More sharing options...
vaperneto Posted December 4, 2018 Report Share Posted December 4, 2018 15 horas atrás, James disse: When does Error Press Up happen for you on SP38? Is it after it has slept for a while, during firing, or..? Thanks! It is not always, sometimes when I have to wake it up Link to comment Share on other sites More sharing options...
AMDtrucking Posted December 11, 2018 Report Share Posted December 11, 2018 (edited) On 12/3/2018 at 9:56 AM, James said: When does Error Press Up happen for you on SP38? Is it after it has slept for a while, during firing, or..? Thanks! Sorry to barge in on your conversation, but I too started getting ERROR PRESS UP. It happens almost every day after DNA250C has been sleeping for a while, I press FIRE button and see this error message. It doesn't bother me too much, because it resumes working properly, just as soon as I press the UP button. Mod: Vape Cige VTX200W, brand-new. I just loaded the latest service pack. Edited December 11, 2018 by AMDtrucking Link to comment Share on other sites More sharing options...
James Posted December 11, 2018 Report Share Posted December 11, 2018 On SP38? What theme are you running, out of curiosity? Could you message me your .ecig settings? Thanks! Link to comment Share on other sites More sharing options...
Lord Zog Posted December 11, 2018 Report Share Posted December 11, 2018 (edited) 3 hours ago, James said: On SP38? What theme are you running, out of curiosity? Could you message me your .ecig settings? Thanks! Hi James. I registered a forum account just to post in this thread. My Lost Vape Triade 250C is doing this also and has been since I got it in August. Seems to show the screen above after sleeping when I try to fire after some time. Pressing up clears and no other issues pop up . This issue happens sometimes once a day to once a week. I have attached my .ecig file the day I got the device and hooked it up to my PC as well as the latest .ecig from today using EScribe SP19 and firmware SP38 since I can't remember the firmware that came with the device and not sure if the files are different or not between the service packs. I am also using the default theme. Only problem I've had since purchase, love the new DNA 250C board! Traide250C - Dec 11 2018.ecig Triade250C - Aug 29 1018.ecig Edited December 11, 2018 by Lord Zog Link to comment Share on other sites More sharing options...
AMDtrucking Posted December 11, 2018 Report Share Posted December 11, 2018 13 hours ago, James said: On SP38? What theme are you running, out of curiosity? Could you message me your .ecig settings? Thanks! Here it is... VTX200.ecig Link to comment Share on other sites More sharing options...
AMDtrucking Posted December 12, 2018 Report Share Posted December 12, 2018 (edited) I don't know if it matters, but three of my other DNA250C boards, have Version 1.1 SP35 INT. Only this one, with the "Error Press UP" problem, had Version 1.1 SP35 US, loaded in it. I changed the Service Pack, on it, to the international version, hoping it might help. I know at least one more person with the same problem on his DNA250C. He is in Russia. If we could get to the bottom of this, I will try to help him too. I speak Russian. P. S: When I was finishing reloading international Service Pack 35, the "Error Press UP" popped up on the screen again. I guess, it didn't help. Edited December 12, 2018 by AMDtrucking Link to comment Share on other sites More sharing options...
rozenkreuser Posted December 12, 2018 Report Share Posted December 12, 2018 Hi, I also have the same problem with my triade 250c. My device is running the latest firmware (int sp38). Link to comment Share on other sites More sharing options...
Lord Zog Posted December 12, 2018 Report Share Posted December 12, 2018 7 hours ago, AMDtrucking said: I don't know if it matters, but three of my other DNA250C boards, have Version 1.1 SP35 INT. Only this one, with the "Error Press UP" problem, had Version 1.1 SP35 US, loaded in it. I changed the Service Pack, on it, to the international version, hoping it might help. I know at least one more person with the same problem on his DNA250C. He is in Russia. If we could get to the bottom of this, I will try to help him too. I speak Russian. P. S: When I was finishing reloading international Service Pack 35, the "Error Press UP" popped up on the screen again. I guess, it didn't help. This happens to me on INT firm also, I have tested both thinking the same thing.. It came with INT and I tested with US and got the same thing so put INT back when SP38 launched. Link to comment Share on other sites More sharing options...
maximumsport Posted December 16, 2018 Report Share Posted December 16, 2018 On 11/28/2018 at 8:48 PM, maximumsport said: Just wanted to report: EScribe Suite 2.0 SP19 also lags like SP18 on Mac. No matter what DNA250C mod I use. Device manager runs really slow on graphing and lags inputs on clicks. SP17 still runs smooth all around with no lags. No idea what was changed in 18 but that has caused big lagging on Mac software. Update. The new link download for SP19 for MAC seems to be running a bit more smoother and less laggy. Thanks! Link to comment Share on other sites More sharing options...
AMDtrucking Posted December 17, 2018 Report Share Posted December 17, 2018 (edited) On 12/12/2018 at 3:15 AM, Lord Zog said: This happens to me on INT firm also, I have tested both thinking the same thing.. It came with INT and I tested with US and got the same thing so put INT back when SP38 launched. One more observation: This error occurs quickly when the board cools down. It took me 5 minutes, to replicate this error, just by placing my mod in refrigerator. Edited December 17, 2018 by AMDtrucking Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now