Wayneo

Damn. Similar setup as you, but older machine. 10.14.2, and the escribe file info looks the same as yours. You'll need to open a Help desk ticket Edit: or maybe @James will see this.

What do you mean Jai? Doesn't even start or crashes or mod not even seen on your new Mac?

You can hide your own post or comment. It hides it from everyone except the moderators.

Well Yes, to both. No problems reported in a while.

Are you running the latest version of the firmware? Link in my signature.

No. But your theme might have a screen that shows the voltages of those batteries when fully charged. More than likely, it's just an inaccurate csv file for your batteries. No need to worry.

See if you can find a screen on your mod that shows the voltages of those batteries when fully charged externally. OR use escribe, Device Monitor which will also show battery voltages. 🖐️

That's not how this works. If the resistance is the same AND the watts are the same the watts will be the same.

When was the last time you used this mod, and did anything happen beforehand? For a blown battery chip, many times that Printscreen looks differently. At the same time, 0 volts remaining in a single cell is odd. If no one has any better thoughts, you should open a ticket with the Help Desk. https://helpdesk.evolvapor.com/?a=add

Never ran the US version actually, so not sure if Replay is on it. Other than that, nothing more I can think of for a 2 cell 250C.

Update to the early release, SP19. That should get you going. Escribe link in my sig.

Can you post a Device Monitor FULL printscreen. Moderator comment: Moved to more relevant area.

It'll work fine out of the box. Install escribe and see if there are any firmware updates. A battery profile to match YOUR battery type will ONLY make the icon on the display more accurate. Watch a video or 2 on your mod, and the 'search' feature here works. Enjoy your mod 🖐️

Does the resistance displayed for the coil match (or really close) what your other mods show? Using just pure watts on your Triade at the same value as your other mods should give you the same vape experience. Punch would cause a stronger vape not weaker, but not good to use on any of the mods for a straight up comparison between 2 mods.

It's part of the escribe suite and not an individual item you download. Link here:

Chief, pretty sure @AMDtrucking also has one and has ripped his apart. Hopefully if you undertake this mission you have proper electronics flux and solder. 🖐️

Looking at those individual low cell voltages, your battery could now be ready for a replacement.

2 options. You can either start at step 4 below (by selecting the NiFe you have in the left window), completely overwriting what you have OR start at step 1 for brand new 'Materials' tab Click '+' under left window There'll be a new 'unnamed' material in left window. Bottom of the display, right side, click 'actions' select bottom option (TCR) enter what you want like 0.003 Just above graph, rename Name: unnamed to what you want. Follow posts by dwcraig here: https://forum.evolvapor.com/topic/66544-dna75-solidworks-iges-and-step-files/?do=findComment&comment=928634 Remember to upload to your mod when done

NiFe48 is NOT a standard/default material profile from Evolv that I have seen. (I checked 2 different C mods, but I could be wrong). You CAN create a custom TCR profile for your wire if you know what value you want to use.

Hmmmm, for starters you might get him to upgrade to the latest firmware (SP19). Also, that temp protect message behaviour has been changed on these color boards to also identify run-away ohms in non TC mode. He can address the firmware from the comfort of his home with no downtime. If that doesn't solve it, then you should look at the build.

True dat. However we're talking output voltage (voltage supplied to the coil), which for a 2 cell mod is the the current pack voltage of the 2 cells. And for 3 and 4 cell mods, 10V max. (Less sag and inefficiences).

@Nexolek Page 2 of the datasheet shows Output Voltage 10.0 Volts Maximum, which can only be reached with a 3 or 4 cell battery mod.

I'd suggest this, now. EARLY SERVICE PACK EScribe Suite 2.0 SP19

Yeah, with the latest firmware. I surmise that the datasheets once published don't get updated. Some mods with the 60 chip don't have USB natively so be aware of that.

No. In 'DNA speak' you can only pre heat a TC material. But all is not lost. You can do a Boost Punch with any material in watts/wattage/power mode. It's a value from 1-11, which is a 1 second boost of the watts you've set. (effectively pre heating your coil)