David Campbell Posted July 21, 2015 Report Share Posted July 21, 2015 Crickets is probably a good sign I've been running this for a couple days and haven't had any issues.In unrelated news, the Starre Pro (unexpectedly) sets a new high bar for TC tanks with pre-made coils. 1 Link to comment Share on other sites More sharing options...
Vape_Like_A_Boss Posted July 22, 2015 Report Share Posted July 22, 2015 I've been running this since it was introduced and everything's been fine for me with escribe and the firmware, although I haven't done much with TC, it's been almost all Kanthal operation. Link to comment Share on other sites More sharing options...
AllenH Posted July 22, 2015 Report Share Posted July 22, 2015 I've been running for a day here, TC with my wonky RDA and single twisted Ni200 coil 28ga, 13 or so turns. Seems quite stable. Haven't played with locked ohms yet. Link to comment Share on other sites More sharing options...
VapingBad Posted July 22, 2015 Report Share Posted July 22, 2015 I have been using this version for a few days and all good including override ohms and res lock, like the resistance on the new/same coil prompt. Link to comment Share on other sites More sharing options...
James Posted July 29, 2015 Report Share Posted July 29, 2015 Added a link above to the 7/27/2015 EScribe version. Main feature: 2S support. Link to comment Share on other sites More sharing options...
vaporlips Posted July 29, 2015 Report Share Posted July 29, 2015 Successful update - Using Windows 10. Link to comment Share on other sites More sharing options...
Gm111 Posted July 29, 2015 Report Share Posted July 29, 2015 thanks for putting the two decimal points displayed in material profiles guys, much appreciated. Link to comment Share on other sites More sharing options...
Vape_Like_A_Boss Posted July 29, 2015 Report Share Posted July 29, 2015 Perfect update install on Windows 7 x64 and successful board flash first try.I just successfully installed the new EScribe using the above exe and it installed perfectly. So I plugged up my DNA 200, and it notified me of the update. I chose to update the firmware, and it worked the first time, smooth as butter.So far I can only say the escribe install and firmware flash worked perfectly, and the mod seems to be working fine for the few minutes I've been vaping on the new firmware. I'll update this after vaping it a while and let you know if I find any bugs or problems with the mod while using the new firmware.So far, it's just like it should be though.James, thank you so much for providing the change logs with the update links. I know it's not at all a necessity but people like me really enjoy reading them and it gives us a better idea of things to watch for during testing. Link to comment Share on other sites More sharing options...
retird Posted July 29, 2015 Report Share Posted July 29, 2015 Installed 7/27/2015 .exe and firmware update using Windows 8.1. Installed without issue. Link to comment Share on other sites More sharing options...
JLIT Posted July 29, 2015 Report Share Posted July 29, 2015 So excited having the option to use 2S and should I decide to go through with 3S builds, just flash the firmware back. Awesome addition so soon! Link to comment Share on other sites More sharing options...
VapingBad Posted July 29, 2015 Report Share Posted July 29, 2015 The fw does both 3S & 2S it is just a setting on the Mod tab next to Battery - Capacity Link to comment Share on other sites More sharing options...
JLIT Posted July 29, 2015 Report Share Posted July 29, 2015 VapingBad said:The fw does both 3S & 2S it is just a setting on the Mod tab next to Battery - CapacityEven better. Thanks! Downloading on POS laptop with Win 7 now Link to comment Share on other sites More sharing options...
DNA Papst Posted July 29, 2015 Report Share Posted July 29, 2015 With the new firmware in temp mod, i can set 600 fahrenheit, but in c(grade) is stop by 300,that is to low.600 f is 315,6. Is it a bug? Link to comment Share on other sites More sharing options...
John Posted July 29, 2015 Report Share Posted July 29, 2015 Not so much a bug as just stopping at nice, round numbers. You really don't want to be running at 300C either. Link to comment Share on other sites More sharing options...
James Posted July 30, 2015 Report Share Posted July 30, 2015 Added a link above to the 7/29/2015 EScribe version. Main feature: Stealth mode doesn't keep the screen off when you're choosing a profile. Kind of hard to switch profiles otherwise. Link to comment Share on other sites More sharing options...
Vape_Like_A_Boss Posted July 30, 2015 Report Share Posted July 30, 2015 James said:Added a link above to the 7/29/2015 EScribe version. Main feature: Stealth mode doesn't keep the screen off when you're choosing a profile. Kind of hard to switch profiles otherwise. My resultsI downloaded escribe and it installed fine, then firmware flash to the device was flawless on first attempt. Windows 7 x 64.I tested the profile change in stealth mode and it's working correctly, it's now easy to see the menus to know what modes you're in without leaving stealth mode, and profile switching menus came up like you intended with the change, so everything looks good here that I tested. Oh and it still vapes when I hit the fire button Link to comment Share on other sites More sharing options...
DonnyX Posted July 30, 2015 Report Share Posted July 30, 2015 Downloaded and installed the eScribe software and the new firmware update on windows 10 x64 no problems at all. Link to comment Share on other sites More sharing options...
Wick Posted July 31, 2015 Report Share Posted July 31, 2015 DonnyX said:Downloaded and installed the eScribe software and the new firmware update on windows 10 x64 no problems at all. Good to know, thank you sir. Link to comment Share on other sites More sharing options...
Justin Posted July 31, 2015 Report Share Posted July 31, 2015 Just wanted to chime in. Updated from 7-9 to 7-29 firmware. All is working well!Not sure when/what was changed, but preheat seems...different. I'm not entirely sure how, but it definitely seems more consistent with a smoother transition, if that makes any sense. I can't really give any more feedback than that without reverting and studying the device monitor, but whatever was changed was an improvement. If anything was changed at all...I suppose it could just be me. Link to comment Share on other sites More sharing options...
John Posted July 31, 2015 Report Share Posted July 31, 2015 I believe we played with the thermal control loop a little to better handle high thermal mass coils and titanium. We also made it react faster. Glad it is an improvement. Link to comment Share on other sites More sharing options...
VapingBad Posted July 31, 2015 Report Share Posted July 31, 2015 Ribbon Ni on steal rope wicks has improved to. Link to comment Share on other sites More sharing options...
Justin Posted July 31, 2015 Report Share Posted July 31, 2015 John, it is definitely an improvement. It's something that I noticed immediately and it has made my vaping experience just that much better. Thank you! Link to comment Share on other sites More sharing options...
James Posted August 5, 2015 Report Share Posted August 5, 2015 Added a link to the 8/4/2015 EScribe, which includes the 7/29/2015 R1 firmware. Mostly usability tweaks. Link to comment Share on other sites More sharing options...
VapingBad Posted August 5, 2015 Report Share Posted August 5, 2015 Thanks James, would be nice to save the DM Time Scale as well, I am normally only interested in 1 puff so set to 5 secs. Link to comment Share on other sites More sharing options...
speed4mee Posted August 5, 2015 Report Share Posted August 5, 2015 When i push the Get Information Button i see this in Windows 7:It's the 8/4/2015 EScribe Version. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now