VapingBad Posted September 21, 2017 Report Share Posted September 21, 2017 16 minutes ago, MikeE3 said: ummm? I must be dumb or something but I can't find the downloads for the latest Mac version (or for that matter the PC version). The only links I've run into seem to be for previous versions. ... Where can I find the link to download the current Mac version and perhaps the instruction pdf for using eScribe? Sorry about this ... I just don't see it from this forum site or links to it from the Evolv home site. I'll probably feel even dumber when I see the answer. First page of this thread as it is a beta release so not where folks not wanting to use test software might download it unintentionally. Link to comment Share on other sites More sharing options...
MikeE3 Posted September 21, 2017 Report Share Posted September 21, 2017 29 minutes ago, VapingBad said: First page of this thread as it is a beta release so not where folks not wanting to use test software might download it unintentionally. Thank you ... I remember the original being posted in the opening thread ... but missed along the way ... the same link was being updated with he revisions. Yep ... I feel dumber. Link to comment Share on other sites More sharing options...
Conanthewarrior Posted October 15, 2017 Report Share Posted October 15, 2017 I have installed the INTL version instead of US as I am in the UK, I guess this was correct? So far have only tried it with my Efusion DNA200, and it seemed fine. Even updated a service pack to the mod- they might be behind a few due to only using windows for Escribe. Now I can use it on Mac OS it makes things a lot easier for me, and all the other mac using vapers out there. Thank you for this. Link to comment Share on other sites More sharing options...
KISS V. Posted October 15, 2017 Report Share Posted October 15, 2017 I would like to see the items noted in the image of the General screen addressed. All of the features that are used most are difficult to view and use. Please note that I am using a Mac Book Pro 13". I would also like for two things to occur when I open device monitor: it remembers what I items I had selected previously; and, I not have to maximize and then minimize for it to bring all items to scale and view. I will never mention the above again if you guys can just go a head a fix the non-linear resistance error in the 75C firmware. I have used multiple fixed resistors in an attempt to add a decent internal resistance setting for my mods and the deviation changes as I swap between different resistors. Link to comment Share on other sites More sharing options...
Doyle4 Posted October 15, 2017 Report Share Posted October 15, 2017 Would love to see Device Monitor aligned properly also, driving my OCD insane Using a 15" Macbook Pro and have to scale to attempt to try and get it aligned, but puts others out also at same time. Link to comment Share on other sites More sharing options...
mrphilip Posted November 25, 2017 Report Share Posted November 25, 2017 (edited) Hello fellow Mac Vape Friends!, Just got my first Triade DNA250 and successfully installed the Mac SP8 (US version) on my MacBook Pro running High Sierra 10.13.2 (beta). Off to Thanksgiving Part 2 right now, hope yours have all been great. Will post my thoughts after I've played with escribe a bit further. Edited November 25, 2017 by mrphilip Link to comment Share on other sites More sharing options...
iAlexander Posted November 27, 2017 Report Share Posted November 27, 2017 (edited) Waiting for my first DNA250 and have downloaded the app to check... I haven’t seen the Escribe win version, but the one made for MacOS - looks like software from 2000 year... Hope that the release version will be a native Mac app, not just ported win interface. Edited November 27, 2017 by iAlexander Link to comment Share on other sites More sharing options...
retird Posted November 27, 2017 Report Share Posted November 27, 2017 When you get the 250 device check out the functionality and features of EScribe when the device is connected All the functions, diagnostics, analyzers, monitor, theme designer, and more that EScribe has is, to, me, what makes it shine in the ecig world. 1 Link to comment Share on other sites More sharing options...
iAlexander Posted November 27, 2017 Report Share Posted November 27, 2017 12 hours ago, retird said: When you get the 250 device check out the functionality and features of EScribe when the device is connected All the functions, diagnostics, analyzers, monitor, theme designer, and more that EScribe has is, to, me, what makes it shine in the ecig world. Of course will check everything, and by the way I have no doubts that it works on MacOS and does all the required settings on DNA mods. I've just shared my opinion regarding the UI/UX of the software. Link to comment Share on other sites More sharing options...
retird Posted November 27, 2017 Report Share Posted November 27, 2017 The USA and International Versions are different due to FDA Deeming Regulations which include software as I understand it.... so the International version can do updated things the USA version cannot... just FYI..... 1 Link to comment Share on other sites More sharing options...
iAlexander Posted November 27, 2017 Report Share Posted November 27, 2017 Oh, thanks for the info. I have tried only "int" version. Link to comment Share on other sites More sharing options...
blueridgedog Posted November 27, 2017 Report Share Posted November 27, 2017 4 minutes ago, retird said: The USA and International Versions are different due to FDA Deeming Regulations which include software as I understand it.... so the International version can do updated things the USA version cannot... just FYI..... What are the specific differences? Link to comment Share on other sites More sharing options...
Wayneo Posted November 27, 2017 Report Share Posted November 27, 2017 Welcome 18 minutes ago, iAlexander said: I've just shared my opinion regarding the UI/UX of the software. No comments on such things as using the spacebar or the return/enter key for accepting a dialog box, or copy/paste in an editable field. IMHO, there are bigger fish to fry. Link to comment Share on other sites More sharing options...
retird Posted November 27, 2017 Report Share Posted November 27, 2017 53 minutes ago, blueridgedog said: What are the specific differences? I'm using the updated INT early version that gives "Boost" for Kanthal using my 75C and the DNA60..... Link to Software/firmware thread here: Link to comment Share on other sites More sharing options...
Wayneo Posted November 27, 2017 Report Share Posted November 27, 2017 Hey @retird, if it wouldn't be too much of a bother, could you describe how boost works on your 60. Mine has no USB, and I don't want to actually 'fire' with only loose wires. I think @James said it was proportional up to a 60w max. Like from 1-11 is it both wattage and time? Link to comment Share on other sites More sharing options...
retird Posted November 27, 2017 Report Share Posted November 27, 2017 I have the 75C but don't own a DNA60 but my understanding is that the 75C boost was ported to the 60 in the early software version. Here is a EScribe screenshot of DNA60 showing the material "Watts" selected and the Boost function just below the material choices.... Since the Theme Designer for the 75C is different than the 60 I think you must use EScribe to set the boost (punch) from 0 to 11 for Kanthal and upload the profile to the 60 and there is no preheat time limit adjustments for Kanthal (Watts) ...With the 75C you can design a theme whereby you can adjust boost on the device absent EScribe.......hopes this helps.... Link to comment Share on other sites More sharing options...
iAlexander Posted November 28, 2017 Report Share Posted November 28, 2017 4 hours ago, James said: It is a native Mac program...with only a few exceptions. What specifically would you change to make it feel more native? I'd change a lot, let's start from the first screen that user see after the launch... There we can see that our "Software Suite" consists of 7 different apps. The buttons that look like blue underlined text (I remember the time 1990s, when every link on any web page looked the same) don't look native/good at all. Also I have spotted the issue with applications/utilities icons. When we launch any utility except of "EScribe" app - it first appears in dock with generic/sample icon, and changes it to normal icon only after some time (I guess it loads it from some destination). If we dive deeper inside "SoftwareSuite" - we will see there even more apps - 10 of them (without our 1 screen launcher)... Why do you think that user needs a wrapper, to launch separate apps/utilities? Or even why do you think that every single user needs all of them after the purchase of DNA mod? I was informed only about ESigStats during the installation process. And if anyone disagree to install it - that's what that user can see after clicking ECigStats link in wrapper: I definitely don't need calculator app, every Mac user already has 2 of them - calculator app and the spotlight that can calculate anything and can be launched over any window. Also I have doubts that a lot of users need ProductionUtility and SerialTerminal (maybe also CaseAnalyzer, cause I'm still waiting for my DNA and can't try the software on real cases). Those apps should be also optional on install (or even only on windows, cause I don't think that a manufacturer will use a Mac to check/setup new mods in his production line). That all was related to SoftwareSuite concept. 99% of EScribe Mac users are the individuals that have downloaded it to setup/edit their DNA mod, and don't need extra utilities. @James: regarding the separate utilities/apps UI and UX, I will write you more details with examples later (need to structure my thoughts in a list). By the way, if you're interested in that topic - you can also check the developer section on Apple website. They have the "Human interface guidelines", that describes (with pics) how the god app should look and operate. 1 Link to comment Share on other sites More sharing options...
iAlexander Posted November 28, 2017 Report Share Posted November 28, 2017 (edited) Not only launcher, that’s just a first thing that looks confusing and not native. Will write about everything other later. Of course you can group apps in folders programmatically in launchpad. Photoshop and others do that. If they all are parts of one program, than they can’t have their own icon and can’t be a separate item in dock. Yes, UI can be created and updated only from the main thread, that is a usual thing that helps to build responsive interfaces. First step to macOS native looking app, is to refuse building all-in-one Frankenstein based on your windows app UI and logic. P.S. As I understand, you don’t use macOS as your main system, right? Edited November 28, 2017 by iAlexander 1 Link to comment Share on other sites More sharing options...
JBood Posted November 28, 2017 Report Share Posted November 28, 2017 Look guys, It’s a beta still yes? And it works great for a FREE BETA of a still in production Mac app. Mad PROPS to the developer. Thank you! It’s merely spit and polish from here. 1 Link to comment Share on other sites More sharing options...
Lowbytes Posted November 28, 2017 Report Share Posted November 28, 2017 Form follows function ! First of all WE are all happy that a mac version exists ! No matter if it looks like a Mac version or like software from the year 2000! For ME it makes no difference how it looks - as long as it is working as expected! For a long period of time we had to use Windows / Parallels to program our devices - this now is over - so for me no need to discuss the look of the mac version !!!!!!!!!!!!!! I´m that happy with this peace of (FREE) Software ! 2 Link to comment Share on other sites More sharing options...
JBood Posted November 28, 2017 Report Share Posted November 28, 2017 Yes! Function is paramount. Aesthetics MUST be secondary unto function. I bought a device with a dna chip knowing the escribe software was in early beta. I have had ZERO issues with the function of this beta. 1 Link to comment Share on other sites More sharing options...
Wayneo Posted November 28, 2017 Report Share Posted November 28, 2017 (edited) While I fully agree with @iAlexander and many of these last 2 points, here are 2 functional points. 1. Change the timing of when the backups are done to after the device has been fully enumerated. As it sits, it's really of no use to a user with multiple boards of the same type. 2. And most importantly, you already know setting an accurate Mod resistance only works for 75 boards. Edited November 28, 2017 by Wayneo Link to comment Share on other sites More sharing options...
Wayneo Posted November 29, 2017 Report Share Posted November 29, 2017 (edited) Another functional issue. While it's usually crickets over there, I actually use ecigstats as I only have/use DNA devices, to see if my 'puffs' increase when I lower nic levels in my eliquid. So I wondered over there earlier, to see that a new version had been released. 2 actually within the last month. Excellent. Off to the 'My Usage' section. It's completely blank, whereas before, it was completely filled (excellently). Tried Chrome, Firefox, Safari, all blank. So I go look at the version number I'm running (remember the 2 updates image). Well, nope, only Version 1.0, actually every program for 2.0 SP9 Intl show a version number of 1.0. I think this fully qualifies as a functional issue. Edited November 29, 2017 by Wayneo Readability Link to comment Share on other sites More sharing options...
Wayneo Posted November 29, 2017 Report Share Posted November 29, 2017 @James Beautiful, I can see my data. Thank you. It was only posted here, because it was sold to Evolv, and no longer Dimension Engineering. Also, we're discussing the Mac Escribe suite. Any work on the Mod Res functional issue? Any thoughts on waiting for the full USB enumeration functional issue? Link to comment Share on other sites More sharing options...
Wayneo Posted November 29, 2017 Report Share Posted November 29, 2017 37 minutes ago, James said: ECigStats was never Dimension Engineering Thank you, it's fixed, and I won't waste your time or mine by loading the first version and looking at the Copyright information. 39 minutes ago, James said: Mod Resistance has nothing to do with Mac EScribe If Evolv loads it on my machine, I consider it part of Mac Escribe. Thank you for working on it. 40 minutes ago, James said: Backups are done when you download settings If you look at my printscreens, right beside that long list of backups you can see the 'name' I called the device. That's what should be shown with the backups, not just board type. You want a PM, or general forum posts from now on? At least we got COLOR. <- Christmas theme. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now