Bapgood Posted October 5, 2015 Report Share Posted October 5, 2015 promod2000avenger said:You stated all 4 of these are from EVOLV.So are you saying EVOLV made 4 different size reference enclosures ?Not that I knew of.They only made 1 size.The small 900mah one.Maybe I am incorrect.If I am please correct me.WaltIf this in reference to my post...I don't believe I said there was 4 different sizes, or didn't mean to anyway.Only that the very early one is slightly shorter. To my knowledge there is only one size. Link to comment Share on other sites More sharing options...
Nick Posted October 5, 2015 Report Share Posted October 5, 2015 lexalove said:I've never seen or owned one of the original reference mods so can someone explain to me what's the deal with the 510 connectors on these mods? What is it about the design that makes it so much better, than say a FDV item, which is what I use on all the mods I sell including the 3D printed reference mod I've built?Then the next question, of course, assuming they are as superior as people are saying will they be made available to us mere mortals?Cheers The main difference is that those 510's on the Reference Mods are made to thread into the case. This allows the 510 to use the case itself as the ground path back to the board via the mounting hardware. It is not necessarily better or worse, just a design choice and also saves the time and space of the additional ground wire. Link to comment Share on other sites More sharing options...
digatel Posted October 5, 2015 Report Share Posted October 5, 2015 mikepetro said:The Reference Mod's bigger 1350mAh brothers: Are those 1350mah cases going to be available to us, or is this just a custom box? Link to comment Share on other sites More sharing options...
Bapgood Posted October 5, 2015 Report Share Posted October 5, 2015 lexalove said:I've never seen or owned one of the original reference mods so can someone explain to me what's the deal with the 510 connectors on these mods? What is it about the design that makes it so much better, than say a FDV item, which is what I use on all the mods I sell including the 3D printed reference mod I've built?Then the next question, of course, assuming they are as superior as people are saying will they be made available to us mere mortals?Cheers 3 things of the Evolv 510 stand out to me:- Spring Force (this is the main one, much higher spring force than any 510 I have seen)- Copper Center Pin (I believe they might be having these coated now for even better performance)- Ultem 1000 Insulator Material (will stand up to the high heat produced by high wattage vaping)I believe Evolv plans to make their 510's available at some point in the future. Just like case design, Evolv has made the design, specs, materials available and free for anyone to use. https://forum.evolvapor.com/topic/68495-topic/?do=findComment&comment=915975 Link to comment Share on other sites More sharing options...
Nick Posted October 5, 2015 Report Share Posted October 5, 2015 Bap pretty much hit the nail on the head, the stiffer spring is my favorite part as a good firm connection is key for Temp Control to work reliably. Link to comment Share on other sites More sharing options...
lexalove Posted October 5, 2015 Report Share Posted October 5, 2015 Thanks Bap & Nick... good information to know.I didn't see any 3D Models specific to the 510 or are they in the model for the reference case? (Only have Solid Works at work so can't open it at the moment since I'm at home). Link to comment Share on other sites More sharing options...
scoopy Posted October 5, 2015 Report Share Posted October 5, 2015 U can get all different sizes of the reference mod on shapeways. I got one that has a maxamps 2250 in it and I have an authentic evolv reference mod Link to comment Share on other sites More sharing options...
digatel Posted October 5, 2015 Report Share Posted October 5, 2015 Are these EVOLV 510's available to the public now or in the future? Link to comment Share on other sites More sharing options...
Bapgood Posted October 6, 2015 Report Share Posted October 6, 2015 lexalove said:Thanks Bap & Nick... good information to know.I didn't see any 3D Models specific to the 510 or are they in the model for the reference case? (Only have Solid Works at work so can't open it at the moment since I'm at home).Yes the 510 parts are in the 3D files Link to comment Share on other sites More sharing options...
Bapgood Posted October 6, 2015 Report Share Posted October 6, 2015 digatel said:Are these EVOLV 510's available to the public now or in the future?I believe they will be available sometime in the future. Link to comment Share on other sites More sharing options...
Jay Ballee Posted October 7, 2015 Report Share Posted October 7, 2015 they have a new version , change the button to a regular black button . and the charger also have change one . have one more extend wire Link to comment Share on other sites More sharing options...
FireBALL Posted October 7, 2015 Report Share Posted October 7, 2015 one of my DNA200 MOD client got this chip LOL, kinda makes me question why was it shipped out without visual check and testing Link to comment Share on other sites More sharing options...
Tomr1088 Posted October 7, 2015 Report Share Posted October 7, 2015 Idk Link to comment Share on other sites More sharing options...
David247 Posted October 8, 2015 Report Share Posted October 8, 2015 Here's my latest mod Regards David Link to comment Share on other sites More sharing options...
Mad Scientist Posted October 8, 2015 Report Share Posted October 8, 2015 David247 said:Here's my latest mod Regards David Nice. Very well done. Where did you get the box? It looks to be exactly the perfect size for a "snug" fit of everything. Link to comment Share on other sites More sharing options...
David247 Posted October 9, 2015 Report Share Posted October 9, 2015 Mad Scientist said:[QUOTE=David247]Here's my latest mod Regards David Nice. Very well done. Where did you get the box? It looks to be exactly the perfect size for a "snug" fit of everything.[/QUOTE]HI its this one http://www.modmaker.co.uk/Mod-Making-Supplies/Enclosures/ModMakerBox-Enclosures/ModMakerBox-WideBoy-Natural-AluminiumRegards David Link to comment Share on other sites More sharing options...
FireBALL Posted October 9, 2015 Report Share Posted October 9, 2015 haven't tried squonking but a bit intrigued, got to try it. Link to comment Share on other sites More sharing options...
lewisss Posted October 9, 2015 Report Share Posted October 9, 2015 David247 said:Here's my latest mod Regards David Thanks for that, I just waiting for a chip back from evolv and your design will be used! Always wanted a squonk box , shame about the battery size, but I have a 2200mah 3s in my original dna but it is a bit of a brick! What buttons did you use there? And is that the squonk kit from mod makers as well? Link to comment Share on other sites More sharing options...
David247 Posted October 9, 2015 Report Share Posted October 9, 2015 lewisss said:[QUOTE=David247]Here's my latest mod Regards David Thanks for that, I just waiting for a chip back from evolv and your design will be used! Always wanted a squonk box , shame about the battery size, but I have a 2200mah 3s in my original dna but it is a bit of a brick! What buttons did you use there? And is that the squonk kit from mod makers as well?[/QUOTE]Hi I will add the parts that I used for you later Regards David Link to comment Share on other sites More sharing options...
Nick Posted October 11, 2015 Report Share Posted October 11, 2015 Hanging out at a local shop today on a Sunday and STILL working to ensure you guys get the same Evolv support you know and love. Link to comment Share on other sites More sharing options...
scoopy Posted October 11, 2015 Report Share Posted October 11, 2015 Hey that's dogmods setup isn't it Link to comment Share on other sites More sharing options...
Nick Posted October 12, 2015 Report Share Posted October 12, 2015 scoopy said:Hey that's dogmods setup isn't itLooks like it....weird. I had heard his name was Nick as well. Link to comment Share on other sites More sharing options...
scoopy Posted October 12, 2015 Report Share Posted October 12, 2015 Lol......guess that answers the queation...when did u start working for Evolv Link to comment Share on other sites More sharing options...
Nick Posted October 12, 2015 Report Share Posted October 12, 2015 scoopy said:Lol......guess that answers the queation...when did u start working for EvolvVery recently, still getting settled in but grateful for the opportunity as I am local to them. Link to comment Share on other sites More sharing options...
scoopy Posted October 12, 2015 Report Share Posted October 12, 2015 Yea I figured when I read your profile and seen you were in Ohio....Congratulations and I'm sure it will be a good fit for you as I've seen your work and it is top notch! Glad to hear this! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now