xevape Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or so I get a few free right, ya know for the idea... ;-) Link to comment Share on other sites More sharing options...
David247 Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or so Going to have to make one of those Regards David Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 xevape said:[QUOTE=FireBALL]After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or so I get a few free right, ya know for the idea... ;-)[/QUOTE]of course Link to comment Share on other sites More sharing options...
xevape Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=xevape][QUOTE=FireBALL]After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or so I get a few free right, ya know for the idea... ;-)[/QUOTE]of course [/QUOTE]You should add a little + and - under the buttons Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 xevape said:[QUOTE=FireBALL][QUOTE=xevape][QUOTE=FireBALL]After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or soI get a few free right, ya know for the idea... ;-)of course [/QUOTE]You should add a little + and - under the buttons[/QUOTE]Shapways version has two buttons, basically with and without Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 here is a quick render of boxer style dual 18650 version Link to comment Share on other sites More sharing options...
Wick Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:here is a quick render of boxer style dual 18650 version When you putting em up?? Link to comment Share on other sites More sharing options...
Wick Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=xevape][QUOTE=FireBALL][QUOTE=xevape][QUOTE=FireBALL]After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or soI get a few free right, ya know for the idea... ;-)of course [/QUOTE]You should add a little + and - under the buttons[/QUOTE]Shapways version has two buttons, basically with and without[/QUOTE] Dido on this? Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 Wick said:[QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required) Link to comment Share on other sites More sharing options...
Wick Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. Link to comment Share on other sites More sharing options...
KTMRider Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:waiting for 3d prints. I do not want to release them without testing for adjustment (if required)*cough* Sculpteo *cough* Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 now you tell me after i have bought few boards Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 Wick said:[QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. [/QUOTE]CNC aluminium is tempting Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 KTMRider said:[QUOTE=FireBALL]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)*cough* Sculpteo *cough*[/QUOTE]checking their site. How's their service and quality? Link to comment Share on other sites More sharing options...
Wick Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. [/QUOTE]CNC aluminium is tempting [/QUOTE] Anodized to perfection. Hell, it may even have inlaid wood panels on the doors ;P Link to comment Share on other sites More sharing options...
KTMRider Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=KTMRider][QUOTE=FireBALL]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)*cough* Sculpteo *cough*[/QUOTE]checking their site. How's their service and quality?[/QUOTE]I ordered a case from them. They have an option for economy service for 30% off. I chose that and it still shipped within a week. They're based in France but it was overnighted to me and I chose cheap shipping too since I wasn't in a rush to get it. I ordered the case first and even with the economy printing and shipping, it was delivered before my other parts that were ordered from the US. As far as quality, I can't say about Shapeways since I've never ordered from them but I read Sculpteo is more accurate and better finished. The only downside is that their website isn't as easy to navigate and searching for others' designs is slow. Link to comment Share on other sites More sharing options...
FireBALL Posted August 1, 2015 Report Share Posted August 1, 2015 Wick said:[QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. [/QUOTE]CNC aluminium is tempting [/QUOTE] Anodized to perfection. Hell, it may even have inlaid wood panels on the doors ;P[/QUOTE]LOLi'll let you know when it goes online Link to comment Share on other sites More sharing options...
Wick Posted August 1, 2015 Report Share Posted August 1, 2015 FireBALL said:[QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. [/QUOTE]CNC aluminium is tempting [/QUOTE] Anodized to perfection. Hell, it may even have inlaid wood panels on the doors ;P[/QUOTE]LOLi'll let you know when it goes online[/QUOTE] Lol. Roger. Link to comment Share on other sites More sharing options...
VapingBad Posted August 2, 2015 Report Share Posted August 2, 2015 I tidied up the Hammond 1590A 950 mAh build I posted on page 4 Link to comment Share on other sites More sharing options...
Bousefield1 Posted August 2, 2015 Report Share Posted August 2, 2015 xevape said:[QUOTE=Always_Jonezen][QUOTE=xevape]#2 in a 1590A Videohttps://instagram.com/p/50iEj3AWIS/?taken-by=xevape Looks damn good a lot of compact power. The only thing I see wrong is the Usb port is sticking up out of the case. Other than that I love it.[/QUOTE]Working out the USB Port issue on #3. I'm going to not cut the legs of the tact switchs so short as to raise them ever so slightly allowing the USB to rest even.[/QUOTE] Link to comment Share on other sites More sharing options...
FireBALL Posted August 2, 2015 Report Share Posted August 2, 2015 Wick said:[QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL][QUOTE=Wick][QUOTE=FireBALL]here is a quick render of boxer style dual 18650 version When you putting em up??[/QUOTE]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)[/QUOTE] You need testers I'll go mod for a mod... Yours, will be CNC aluminum. [/QUOTE]CNC aluminium is tempting [/QUOTE] Anodized to perfection. Hell, it may even have inlaid wood panels on the doors ;P[/QUOTE]LOLi'll let you know when it goes online[/QUOTE] Lol. Roger. [/QUOTE]Beta version is online on shapeways Link to comment Share on other sites More sharing options...
Bousefield1 Posted August 2, 2015 Report Share Posted August 2, 2015 xevape said:[QUOTE=Always_Jonezen][QUOTE=xevape]#2 in a 1590A Videohttps://instagram.com/p/50iEj3AWIS/?taken-by=xevape Looks damn good a lot of compact power. The only thing I see wrong is the Usb port is sticking up out of the case. Other than that I love it.[/QUOTE]Working out the USB Port issue on #3. I'm going to not cut the legs of the tact switchs so short as to raise them ever so slightly allowing the USB to rest even.[/QUOTE] Link to comment Share on other sites More sharing options...
Bousefield1 Posted August 2, 2015 Report Share Posted August 2, 2015 If u get some 5mm int dia fibre or rubber washers they fit nicely on the tac switches and extra to shim out more nice job though Link to comment Share on other sites More sharing options...
FireBALL Posted August 2, 2015 Report Share Posted August 2, 2015 KTMRider said:[QUOTE=FireBALL][QUOTE=KTMRider][QUOTE=FireBALL]waiting for 3d prints. I do not want to release them without testing for adjustment (if required)*cough* Sculpteo *cough*[/QUOTE]checking their site. How's their service and quality?[/QUOTE]I ordered a case from them. They have an option for economy service for 30% off. I chose that and it still shipped within a week. They're based in France but it was overnighted to me and I chose cheap shipping too since I wasn't in a rush to get it. I ordered the case first and even with the economy printing and shipping, it was delivered before my other parts that were ordered from the US. As far as quality, I can't say about Shapeways since I've never ordered from them but I read Sculpteo is more accurate and better finished. The only downside is that their website isn't as easy to navigate and searching for others' designs is slow. [/QUOTE]thank you, much appreciated. I'll try them right away Link to comment Share on other sites More sharing options...
blueridgedog Posted August 2, 2015 Report Share Posted August 2, 2015 FireBALL said:After looking at xevape's Hammond 1590a mod, I decided to make a face plate for it and also a oLED holder. It will be available on shapeways in a day or so Love a link as I am working on a rocker switch as well and could use a look at the back side. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now