BdubH22 Posted September 23, 2018 Report Share Posted September 23, 2018 Hi guys, im looking to find some help on a few issues with my lost vape triade dna250c project sub ohm edition. First and biggest issue the error message i get several times a day. White screen that says Error Press Up. Sometimes it happens when the screen turns off, sometimes it does it inbetween puffs, does it when i update it or try to change the theme. Each time it makes me unlock the device again. Ive reset it back to the default theme and still does it, also my replay function is wonky.. I can change it to replay but i cant hit the save button. Also earlier it went to black screen and wouldnt turn on again until i popped a battery out.. Ive only had the thing for 2 weeks and i did upgrade to the sp35. I did see the soft and hard reset options on escribe but wasnt sure what they do, so would one of these reset the entire chip back to factory? Firmware and all? Link to comment Share on other sites More sharing options...
Wayneo Posted September 23, 2018 Report Share Posted September 23, 2018 3 hours ago, BdubH22 said: I did see the soft and hard reset options on escribe but wasnt sure what they do, so would one of these reset the entire chip back to factory? If you meant reboot, you can do either. The dangerous option is 'restore defaults', that one will reset back to factory (unless the vendor saved their default values). Link to comment Share on other sites More sharing options...
BdubH22 Posted September 23, 2018 Author Report Share Posted September 23, 2018 I did the restore defaults option last night and it fixed replay but im still getting the "error press up" message.. I didnt have this problem before i did the service pack upgrade, is there any way to install an older SP/firmware? Link to comment Share on other sites More sharing options...
dwcraig1 Posted September 23, 2018 Report Share Posted September 23, 2018 4 hours ago, BdubH22 said: I did the restore defaults option last night and it fixed replay but im still getting the "error press up" message.. I didnt have this problem before i did the service pack upgrade, is there any way to install an older SP/firmware? Connect to EScribe, tools tab, apply service pack, choose the one that you want. Link to comment Share on other sites More sharing options...
BdubH22 Posted September 25, 2018 Author Report Share Posted September 25, 2018 Ok i tried reinstalling the same service pack but did not work. It was my only option so where do i download service packs from? Cant seem to find anything on the evolv site besides escribe Link to comment Share on other sites More sharing options...
AnnaR. Posted September 25, 2018 Report Share Posted September 25, 2018 (edited) i have same problem with my Vapecige VTBox250C since the new servicepack, but not on my Paranormal. Fortunately i have found that servicepack before in my backup of my Mac, 1_1_SP33_2_INT.sw-service good luck 1_1_SP33_2_INT.sw-service 1_1_SP33_2_US.sw-service Edited September 25, 2018 by AnnaR. 1 Link to comment Share on other sites More sharing options...
BdubH22 Posted September 25, 2018 Author Report Share Posted September 25, 2018 i think i finally got it figured out and SP33.2 seems to have fixed it (sp35 = a dud for now!). Thank you everyone that helped me on this! So I ended up uninstalling escribe and downloading an older version of Escribe from 2015 here and then i upgraded the Escribe with the link from the 2nd to last post on this page that contains sp33.2, shut Escribe off, restarted the PC and installed 33.2 on my mod. No more white screen saying error press up!!!! 1 Link to comment Share on other sites More sharing options...
AnnaR. Posted September 26, 2018 Report Share Posted September 26, 2018 good to hear u solved it. At me only put the 1_1_SP33_2_INT.sw-service on my Vapecige, solved it, i don´t have to install other escribe-versions before i get the "error press up" everytime when the DNA try to go sleep, sometime while uploading with escribe. Use original config/theme or factory settings, makes no difference. So for me SP35 is buggy bye 1 Link to comment Share on other sites More sharing options...
James Posted September 27, 2018 Report Share Posted September 27, 2018 It does it in *between* puffs? (Do you mean in the middle of a puff?) What theme are you running? Thanks! James Link to comment Share on other sites More sharing options...
BdubH22 Posted September 27, 2018 Author Report Share Posted September 27, 2018 It didnt matter what theme i was using. I even tried restoring factory defaults and kept having the same errors with SP35. And it didnt give me the error while i was hitting it but it seemed to randomly thow me the error when the screen timed out (goes black) so sometimes it happened while holding it if i didnt chain vape. Since i downgraded back to SP33.2 i havent had a single issue with anything, not even custom themes! SP35 is flawed! Link to comment Share on other sites More sharing options...
plauz3ee Posted October 31, 2018 Report Share Posted October 31, 2018 Same bug for me with sp35. sp33_2 will fix it. Thanks for help Link to comment Share on other sites More sharing options...
xian40 Posted November 2, 2018 Report Share Posted November 2, 2018 i got error press up too directly after sp35 update and check battery error on a brand new triade dna250c. 3 new battery just for him. its weird. Link to comment Share on other sites More sharing options...
Roshan Posted November 3, 2018 Report Share Posted November 3, 2018 Its really funny this is happening. i have one triade dna250c that does not turn on when batteries are inserted and needs a jump start by connecting the usb cable and then its all fine.. now the new one i got (traide 250c) does not have that problem but the 'error press up' error but not the others. Having said that i also have a thinkvape finder 250c which has none of these problems including the deep sleep for which they brought out the SP35. anyone think it has something to do with lost vape? Link to comment Share on other sites More sharing options...
xian40 Posted November 3, 2018 Report Share Posted November 3, 2018 its hard to tell. first mod was a physical trouble, second mod error press up is the firware(sp35). just go back to sp33 on it. Link to comment Share on other sites More sharing options...
James Posted November 6, 2018 Report Share Posted November 6, 2018 If you would like to try it, this experimental firmware (SP38) may fix the DNA 250C Error Press Up bug that was introduced in SP35. Let me know if you still get Error Press Up when using it. Link to comment Share on other sites More sharing options...
cyberjunkee Posted November 8, 2018 Report Share Posted November 8, 2018 SP38 has fixed the issue :) You can repoduce the issue with SP35, when using the Soft-Reboot Feature within EScribe. Link to comment Share on other sites More sharing options...
AnnaR. Posted November 10, 2018 Report Share Posted November 10, 2018 (edited) always "error press up" with SP38 on my VTBox, only SP33 works fine Edited November 10, 2018 by AnnaR. 1 Link to comment Share on other sites More sharing options...
James Posted November 12, 2018 Report Share Posted November 12, 2018 @AnnaR., when are you seeing the Error Press Up in SP38? When the device starts up after a long sleep, or...? 1 Link to comment Share on other sites More sharing options...
AnnaR. Posted November 12, 2018 Report Share Posted November 12, 2018 with SP35 is see this error on some situations, with SP38 it happens after the first long sleep after Update, so i quickly switch back to SP33 1 Link to comment Share on other sites More sharing options...
Wayneo Posted November 12, 2018 Report Share Posted November 12, 2018 On 11/6/2018 at 3:20 PM, James said: If you would like to try it, this experimental firmware (SP38) may fix the DNA 250C Error Press Up bug that was introduced in SP35. Let me know if you still get Error Press Up when using it. @James , my mod with SP35 (told you about this earlier) did not exhibit this until after I created a new screen on the Evolv default theme and had it set to 'return to parent'. After changing that option to 'return to main screen' all is fine at SP35. That mod is still at SP35. Link to comment Share on other sites More sharing options...
AMDtrucking Posted December 19, 2018 Report Share Posted December 19, 2018 On 11/12/2018 at 7:03 AM, James said: @AnnaR., when are you seeing the Error Press Up in SP38? When the device starts up after a long sleep, or...? I took your advice, in the other thread, installed SP38. I haven't seen "Error Press UP" ever since. Thank you very much for your help! 1 Link to comment Share on other sites More sharing options...
StrahmNoMore Posted February 12, 2019 Report Share Posted February 12, 2019 So this is kind of crazy. My name's Wade, I owned a few DNA 200's a couple of years ago, but had been out of the DNA game since. I just got the Lost Vape Triade DNA 250C yesterday and out of the box, well first it wouldn't power on. Then once it booted up I started getting the white screen with the "Error Press Up" message in red. I used it for about4-5 hours with that happening sporadically. It would happen while actively vaping or if I left it sit and it would go into lock mode. Also, it kept asking me if I was using a new coil without changing the atty. I connected to Escribe, found it was running the SP35 so I downloaded SP38. Still kept happening, but not as often. I came here and saw this thread and took Anna's advice and put SP33 on it and it hasn't happened since. The only thing is I notice with that the mod will only go to 250 watts (which really isn't a problem per se I don't vape at 300 watts), but this morning after it had sat idle with no atomizer on it overnight, it was dead and I had to push a bunch of buttons to get it to start up, but it's been fine since. Just seems kind of bogus to me to have a new mod that it says was made in December 2018, programmed in January of this year and have to use an older version of software to operate. Not sure if I am going to try and send it back yet or not, just kind of waiting to see what it does. I only have 3 batteries and to it's credit they are now charging after 24 hours of use. Link to comment Share on other sites More sharing options...
zark Posted February 14, 2019 Report Share Posted February 14, 2019 Save your settings in Escribe so that you can bring it back and try to install it. Attention, CRV battery for samsung 30q Triade 250c remote rus.ecig Link to comment Share on other sites More sharing options...
Vapors Tongue Posted July 1, 2019 Report Share Posted July 1, 2019 On 11/12/2018 at 5:59 PM, Wayneo said: @James , my mod with SP35 (told you about this earlier) did not exhibit this until after I created a new screen on the Evolv default theme and had it set to 'return to parent'. After changing that option to 'return to main screen' all is fine at SP35. That mod is still at SP35. Reviving an old thread but i suffered the same problem with error up message every time i uploaded a theme or firmware to my device but everything worked as it should even though it displayed error up message , the device in question is a vapecige VT250C i now have 2 of them one gives this error up message the other one doesn't , i read this thread and tried Wayneo's solution as my lock screen hadn't got anything assigned to it so i assigned round robin and it fixed the problem of the error up message Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now