Let's see your 250's!

[baustinmcmanus]

Just like the Let's see series for the 75 and 200, let's see those 250 mods everyone is rocking. October is nearing and there will be more on the market soon, but I know there are some out there who already have the boards in some sick mods. Post pictures and give a description of your mod.

[antyac2108]

Alpinetech G+ Maxamps 1850mah 3s Otto P9 switch Cisco 510

[dylang919]

antyac2108 said:

Alpinetech G+ Maxamps 1850mah 3s Otto P9 switch Cisco 510

Nice man. How's it working so far? Is it nice having the 2 amp charge?

[antyac2108]

It working great. The temp control is really great. The 2 amp charging is great. It charges my maxamps 1850 in about 2 hours or so

[wiredl0ve]

Alpinetech P+
modsledz tray
modsledz board mount 
Varitube V1 10mm (padless) 
Samsung 25Rs

  

       

[Doyle4]

Stuck mine in a VTbox200 for now until my enclosure is done, will post an updated pic when done.

[wiredl0ve]

Doyle4 said:

Stuck mine in a VTbox200 for now until my enclosure is done, will post an updated pic when done.

Your VT Box looks like my VT Box.    Hmm.. I may need to go dig up my vapeocalypse  stash from the secret hidden location in the woods.  

[Doyle4]

V3 White panel version, sanded it down and etched the panels 

[We_Said_Destroy]

wiredl0ve said:

Alpinetech P+
modsledz tray
modsledz board mount 
Varitube V1 10mm (padless) 
Samsung 25Rs

  

       

amazing!

[wiredl0ve]

We_Said_Destroy said:

amazing!

Thanks.   I like it - until the next new great mod, chip, device, etc comes along.  

*I can stop any time I want... * 

[Seigfried]

How is that Cisco 510 working out?

[KTMRider]

No DNA250 section so I'm throwing this in here

DNA200 on the left (950mah), DNA250's in the middle and right (1300mah)

[retird]

NICE..............................  

[turbocad6]

dna250 dual 18650 squonker

[dylang919]

My BOSS 3000 V2 from Vaporized Nomads

[Spygoat Vapes]

Just got my S&P Customs DNA250. It has an 1850 100C lipo!

 
 

 

[Rob_H]

turbocad6 said:

dna250 dual 18650 squonker

Impressive I really dig the brass did you mill it yourself?

[steam loco motive]

 

[turbocad6]

yeah Rob, milled the brass myself

[JLIT]

Will have custom actuator flush along with same copper, nickel, show chrome (think motor cycle wheel show chrome), and heavy 24K. All milled from 7075 Aluminum. No epoxy. Custom faceplate pressure fit with backplate held by 0x80 (4) screws threaded to faceplate through delrin backing plate. Lid has milled groove with 4mm of compression via o-rings. Using FDV V3 LP (ceramic core) which is SS and will be 24k plated as well. Been a 8 month project with 50 units going out. Days away from being sent to gold plating from the chrome. Using 3S 11.1V 65C 1550mAh Lipo with its own milled cavity. It's a big f'er. 

[dylang919]

JLIT said:

Will have custom actuator flush along with same copper, nickel, show chrome (think motor cycle wheel show chrome), and heavy 24K. All milled from 7075 Aluminum. No epoxy. Custom faceplate pressure fit with backplate held by 0x80 (4) screws threaded to faceplate through delrin backing plate. Lid has milled groove with 4mm of compression via o-rings. Using FDV V3 LP (ceramic core) which is SS and will be 24k plated as well. Been a 8 month project with 50 units going out. Days away from being sent to gold plating from the chrome. Using 3S 11.1V 65C 1550mAh Lipo with its own milled cavity. It's a big f'er. 

Very nice bro!!! Beautiful mod!!

[dylang919]

Spygoat Vapes said:

Just got my S&P Customs DNA250. It has an 1850 100C lipo!

 
 

 

How did you get this mod ordered? I went to sp customs website and the only mods he had on there to order were unregulated box mods. I ordered a sx 350j v2 box from him about 6 months ago and it turned out great. It's still in my rotation. The website doesn't have anything to pick from anymore. Let me know how you ordered if you don't mind and have the time. Thank You.

[dwcraig1]

 

[Rob_H]

turbocad6 said:

yeah Rob, milled the brass myself

Thats cool I like it

[jurdanas]

 dwcraig1