mrphilip

Lanzarotechris' advice is sound. I have issues with one usb port on my computer all the time. It will charge but not recognize through it. If I place my external hard drive in that port, it ejects and reconnects every few minutes. My 2nd port works great and likely its that the 1st port has had more things plugged & unplugged over the years causing some wear & tear.

Nick, is this the correct setting we need to add on escribe for the 250c (and the other chips) so it's ready to handle the Uwell Crown IV's ss904L coils? I'm getting the option to save my puff so I would say its replay compatible... shout out to vapetraveler for doing the legwork. https://vapetraveller.com/2018/11/24/a-shout-out-to-ss904l-wire-okay-its-a-review-but-still-via-r-electronic_cigarette/ DNA200-SS_904L-SteamEngine.csv

Where are the VTC5D CSV files you applied, I can't find them. Thank you in advance.

Wayneo somehow a bit of liquid found its way onto the positive side of one battery landing at the deep end of the sled. A tip came to my rescue . I think that is what caused this issue. Just got your message, been very busy as we near the last 225 days of a 10 year project to spend time enjoying all escape offers. If you come across some CSV files for the SONY VTC5D rewraps by Vapecell, please let me know... thanks in advance.

Are you guys properly drawing e-liquid to the small side of the pod by taking a few pulls of mid strength to properly prime your coils. Don't press the fire button and close the airflow off then pull until you see liquid fill perhaps 1/2 of that section right under the drip tip. As I raise the wattage I find the wicking can't keep ups very long before the cotton burns. But if I am non-abusive and my aim is decent flavor and my nic fix gets met, I'm satisfied. Clouds are a bonus but not the point of a stealthy pod device like Orion.

Have you tried the Vaporesso GT clapton 0.2 ohm coils in any smok big baby compatible tanks yet. I have heard a few say they exceed smok coils and while I have some, haven't tried them yet as those tanks are currently dethroned in my home. I have a Big Baby and a Baby Prince as well as the Lyra tank and all three use the same coils... let you know if they are replay capable. The company I beseeched twice this year, Uwell, asking they add to their Kanthal coil offerings, haven't done anything yet for the Valyrian but did just release the Crown IV with ss904 coils, a new stainless option, so I think they heard me when I asked for something that works with Replay. Now that they have exceeded other companies ss316l offerings, all I hear from people on youtube reviews and in the comments is BUT WHY DID THEY RELEASE THIS BEFORE THE ANNOUNCED MESH COILS ARE READY??? No reviewer has tried this tank on a DNA250c mod yet that I have seen so I think they might be missing Uwell's intent. I doubt the coming mesh will be Replay compatible or that is why the mesh is still unreleased-they might be working on a first for manufacturer coil that works here... I'm still not sold on mesh as they don't have the consistency nailed down for durable coil life. Evolv should be flattered with this Rolex coil option.

My experience has been that when you select the replay feature an empty box appears below the wattage. After you take a puff it offers you the option to SAVE PUFF in that box. When you do so PLAYING then appears where the wattage was previously listed and CANCEL becomes the option in the box underneath. If you select cancel it brings you out of replay. Are you seeing similar? Screen shots of your mod at these intervals are very helpful. Do you need to see some/when asking questions here I find posting such helpful too. [Sorry I haven't used any to illustrate the above but I'm not working from my phone right know where I can easily take those pics but will if asked]

I have had no problems using theme designer with my Lost Vape 250c Triade and Parnormal mods. I've successfully added new labels and changed colors of text with SP17 and the beta in progress. Have not tried a 75c design yet, but I am using DJLSB's V2.2 & v2.3 DNA 75c theme as my base so that should work for you as well.

Nick, can you help with information on the Uwell Crown IV? Likely a Replay compatible atomizer so I think a few people will soon need settings for their new SS 904 coils. I have one in transit and will let you know what I find after I play game of thrones with my new atty on a 250c. _______________________ My experience with their Crown III 0.25 SS coils is that they seem to taste better with Replay than they did before these chips came out. Not sure what you did, but it worked. When I return it to my Triade 250 from a Triade 250c it diminishes back to what I had tasted before. Maybe I should update the firmware there, it's been a while. Thanks

SS 904 has been used by Rolex for watches and now Uwell has released Crown IV coils made from this level of Stainless Steel which is apparently more corrosion resistant. Still looking for the files to use for this metal.

I have 1 August 28 board programmed September 22 put in Mod device and another a PSO version from a month later. Both seem to be fine so far. Brandon, shoes have a worse sell-thru rate from flaws than this. GREAT JOB AND THANK YOU for advancing the options we have once again. Might you somehow make replay available to DNA250 models from late 2017. Pretty Pretty Please with Flavor of your choice on top.

Upload to High Sierra 10.13.6 complete. Changed setting on my second Orion using this version and tested device monitor with no significant problems. Monitor does freeze some and errors show on many tabs for a short bit but it corrects itself. Happened in SP17 too. Thank you for the rapid answer James.

James, people with a MacBook Pro from late 2011 like myself are not eligible to upgrade to Mojave. High Sierra 10.13.6 is the most we will get. My laptop isn't dead yet and I'm not planning to upgrade until needed. Please ensure escribe SP18 (?) is made to function for all of us, not just cutting edge beta testers. I find Apple's decision kind of silly as I have been a beta tester for every release up to this point.

Being one of the first 100,000 people to use this device is almost a privilege in my mind. Exceeds all other pod devices I own (Solo Flat, CFlat, Infinix & Breeze2). My two Orion's seem to be functioning decently. One pod's drip tip came lose and I fried another when I set it to 18 vs 15 manufacturer setting. I would think it can only wick so fast even though it has the capability to hit 40 watts. I lowered it to 17 and so far no problem... fyi: I'm using current Mac version of escribe to check on things.

Three more views without clutter

Does cell 1 look odd or does it drop like this when plugged in... shown here before, during and after 2 puffs taken. Paranormal 250c. New married VTC5D rewaps in prime condition. Changed my theme today to a current release of one I have been enjoying and the CHECK BATTERY message has prevented firing at least 8 times in as many hours. Fixes itself after one press of the fire button but seems abnormal. I recorded the diagnostic and even there the manner cell 1 & 2 are reading seems inconsistent to me. Suggestions? cell1dropweird.csv

thank you

Only smok rba's work with replay. None of their coils are temp capable as far as I have seen. Today I have a Crown III Replaying on the Paranormal with its .25 ss coil [rated as 80-90 but someone suggested going to 95 and I agree... plus the coils still last 2-3x longer than Smok oem] & a drop dead with .18 juggernaut 316l at 65w on the Triade 250c right now. My Valryian is now relegated to my first Triade, a 250 and my Big Baby and Baby Prince sit on two more. I have reached out to one kanthal camp manufacturer and requested a 2nd wind offering of a coil option. 6 months ago they said no. Last month... maybe. Try it. Couldn't hurt.

ANY CSV for the Vapecell 25A 2800 mac (Sony VTC5D rewrap)?

i'm allowing unlikely coils and my uwell valyrian kanthal a1 seem to be replaying... what kind of trouble should i be on the lookout for?

Working great with their 0.25 SS coils!

Any chance of getting a Uwell Valyrian coil to replay. I'm getting a very steady reading when I check the atomizer.

@wanderb Any chance you have one of these for the DNA250c or DNA75c. Really appreciate the DNA250 you shared with us. I found a dual purpose for it.... as I when to seal it folded with tape, I left one edge open to keep a spare $20 for emergency needs.