Search the Community
Showing results for tags 'dna75c'.
Found 134 results
-
-
Version 2.2.0
18,979 downloads
Supports DNA250c and DNA75c, and Replay on both of those chips. Now you can choose from two different UI from the settings page. You need the latest international firmware 1.1 SP33.2 INT (included with EScribe Suite 2.0 SP15) on your DNA75c for it to work. Note: The status messages, like temp protected or atomizer short etc. are only displayed when firing. Press the fire button to exit the menu or any other page that doesn't have a back button. I hope you guys like it! Also check out my other themes:- 148 comments
- 29 reviews
-
- 32
-
-
-
- replay
- minimalstic
- (and 10 more)
-
Version 1.0.5
4,293 downloads
The theme is based on my previous topics. It works on DNA75C DNA250C, and in DNA75C does not operate "Power bank" mode. The theme of VapingBad is the basis theme - here are many changed: icons and there are extra features .. I use his conversion for pre-heat - a very compact solution. Copy from VapingBad ***************************************************************** In the photos the 1st is when preheat is on, 2nd is preheat off, 3rd is dropped out of temp protection. 4th is TP-enabled=false, 5th is TS-Material=false. This is how the conditions are set: The TP icon: default shows on image, atty\temp-protect-enabled=false as the condition for showing the off image. atty\temp-sensing-material=false also for showing the off image. Text status: default shows "PH" for preheat atty\preheat-enabled=false shows "---" atty\temp-protect-enabled=false shows "PWR" in yellow atty\temp-sensing-material=false shows "PWR"in yellow atty\temp-sensing-dectect=false shows "???" in orange (tested with an ss coil using a NI profile) Temp Field: atty\temp as default atty\temp-protect-enabled=false shows diag\atty\voltage atty\temp-sensing-material=false shows diag\atty\voltage ***************************************************************** Extras: In Lock Screen down: Current in charge or root temperature in non charging mode. In Main Screen two resistans: locked ohms and life ohms. In Main Screen right to Power: temperature of board or output voltage in VW mode. In Main Screen right to Temperature: Temperature ot last puff Screenshot for Simple version: Screenshot for extended version: Copyman-Gothic-III.ecigtheme Copyman-Gothic-IV.ecigtheme Copyman-Gothic-IV-simple.ecigtheme -
-
-
_ecigtheme.a048502650b7a90b9e7176d86ede3e5c.png)
Version 2.1
6,604 downloads
The iOS Theme. Available in 4 COLORS. Recently Updated to 2.1 Made with extra care from scratch, I'm happy to give you The iOS Theme! The iOS Theme supports Replay on both DNA 75c and DNA 250c boards. This theme utilizes everything a DNA color board has to offer. This creation was inspired when i saw that big beautiful battery icon of an iPhone while i was vaping. I wanted that for my mod ASAP... and thus my creativity journey begun. Hope you enjoy the result! Enjoying this theme? You can always help me out with a PayPal donation! Available Colors: *Colors are based on the default wallpapers for iPhone XS, XS Max and iOS12 iOS12: Space Grey: Silver: Gold: Main screens: Temperatute Control (TC): Replay: Regular Wattage mode: Icon Menus: Phone: Safari: Messages: iTunes: Swap Time for Battery %: Advanced Live recording options with color mapping: Battery info for up to 4 batteries: Credits to Apple and their iOS graphics team for the inspiration. -
replay Material-ish Fire - DNA75c - DNA250c Optimized
SirTimmyTimbit posted a file in DNA 75 Color, 250 Color
Version 2.0.0
6,627 downloads
Strongly recommend updating to this new version 2.0.0 as it adds new features. A material colored theme for DNA75c and DNA250c. Customization options far beyond what's featured in the default Evolv theme. Notes: You can press the fire button to exit out of a screen that doesn't have a back button. LED colors styled to the theme. When you change the material of a profile (eg. from Watts to SS316L) you won't have the appropriate toggles (eg. Temp Control, Replay) activated right away. You need to back out of the Atomizer Profile screen, fire the mod and go back into the Atomizer Profile screen. This is an Evolv/Theme Designer issue. If you have temp control enabled, you can switch positions of the power and temperature field on the main screen by enabling "Big Temp" in Menu -> Settings In the Atomizer Profile screen you can adjust the Pre-heat temperature either via a Punch gauge or via a Temperature field. You can switch between them with the new toggle next to the Pre-heat label. I made this version with the new DNA250c Paranormals in mind. I think it would look good on the darker ones especially. I'd love to see some handchecks if you're using it on a Paranormal! Also check out the other version of this theme -
Version 1.0.1
2,889 downloads
If you like a lot of information on the home screen, and want to adjust preheat / boost settings from the main screen then you might like this! All the features present on my previous themes, Gauges and the Material-ish themes, are available on this one too. Please let me know if you find any bugs / issues. Happy to take feature suggestions too! Check out my other themes -
Version 2.0.0
68 downloads
Just a simple monster energy theme. Created with the international escribe version V2.0.0 is with a little tweaks -
Version 2.1
64 downloads
This is a Steam Punk theme I made. This theme has as many features as possible. All buttons work no problem. it has alot of custom icons/ color layout I made for the theme. Download it to get a up close and personal look at the theme. -
How can I make Custom Icons and Gauges for my themes and import them into Escribe. I don't need a step by step guide but more so a software I can use to create the icons and gauges.
-
Version 2.3.0
15,631 downloads
This is a modified version of the DJLsb theme that came pre-installed on my Lost Vape Paranormal/Therion 75c mods - full credit goes out to Daniel@djlsbvapes for the design of this excellent user interface that offers an array of functionality without being too cluttered and over complicated. I was unable to find a Replay enabled version, so took up the challenge of integrating Evolv's main screen UI so I could continue using my favorite theme with the added benefit of Replay. Edit: Daniel@djlsbvapes as since released an updated version with Replay, a copy of which can be found on his website. Older 75c devices - so long as you have taken all the right steps to upgrade your firmware this theme will work just fine - I found YouTube video: 'Replay Mode - how to get it on your 75C' by 'vaping v1ck' helpful, please also check here for guidance. 250c devices - no firmware upgrade required, just upload and go. Happy days 😉 UIColourToggle function available in V2.1 onwards. This feature appears on both the MAIN and REPLAY screens allowing you to toggle your UI between white and a mono color of your choosing for matchy matchy customisation i.e. orange matches up really well with silver Paranormal/wooden panels, as does Stealth with my carbon/black edition Therion for a classy toned-down look - other colour options to suit Mirage are also available from the download section. UI toggle buttons are conveniently located to provide quick switching between mono color and the default bright white display - useful in bright sunny conditions 🙂 Other modifications include: - PowerBank UI included to support USB-On-the-go (new) - ‘Warmth of Puff’ feature included on REPLAY screen - Up to 4x battery voltages included - Minor tweaks to button/field positions and removal of separation lines to provide clearer/ergonomic viewing. - Lost Vape emblem in place of full logo - for sharper imaging. - Revised battery indicators for improved vividness. Fully optimised for dna250c, and cross-compatible with dna75c devices ColourToggle options: Green, Orange, Stealth, Blue, Red, Cyan, Purple and now Magenta...choose to best suit your setup.- 47 comments
- 19 reviews
-
- 10
-
-
-
-
- fully optimised for dna75c & dna250c
- replay
- (and 26 more)
-
-
Hi I recently bought a dna75c board and it is missing an electronic component. The screen does not turn on and the voltage ranges every 0.5 seconds approximately between 3.8V and 4.2V. Would someone be so kind as to tell me what component is missing to fix the board?. It would be faster to fix it than to wait for a resolution with the seller. I live in Spain and I bought the board in Germany. I have attached a picture. Thanks in advance.
-
replay ✪ Therion - Paranormal - Mirage and others - Replay Ready - English & Italian ✪
Frank65 posted a file in DNA 75 Color, 250 Color
Version 2.8.8.1
36,075 downloads
Full options theme with Replay. Rev 2.8.8 - March 2019 -
_ecigtheme.8b87a507e260833c3c98d501efd2c052.png)
Version 1.0.0
202 downloads
The theme has a clean and simple home screen which can take you either to the main menu or to the "secondary home screen" which is a bit more in dept. It suits thoose who like me want a lot of different read outs and information while setting your vape up but dont need it all the time. There is, at the moment 5 different colors available. Blue, Green, Orange, Purple and Red. Will as usuall be happy to get any feedback or suggestions. And if you try it out and notice any flaws or mistakes i made please point them out to me so i can fix any issues in an update. -
Version 1.3
122 downloads
Wooden DNA [ver. 1.0] This theme/OS was created in EVOLV EScribe® [Version2.0 SP19] and EVOLV EScribe® [Version2.0 SP19] Theme Designer. Tested on DNA250c® using the Lost Vape Paranormal® mod. Unlock sequence (PIN) is Down - Middle(Select) - Up. You need to set date in 24h form in order to display properly on Lockscreen. No errors or malfunctions reported. WoodenDNA.ecigtheme WoodenSettings.ecig -
-
byJkronicle_ecigtheme.d85562e88ded66cd6183cd75cb3e5908.png)
Version 1.0.0
108 downloads
Basically just a custom default theme that's simplified with a beautiful cyan blue color. Default Custom(Cyan) by Jkronicle -
-
I've been using my Rebel DNA75C 21700 for two months expecting the buttons would eventually loosen up. They have not. All 4 buttons are as difficult to press today as they were when it arrived. I don't see any places where buttons are rubbing on the case openings, there's a bit of gap all around all four. But they all require more than twice as much force as the buttons on my Mirage. I'm wondering if the switches on the DNA board Rebel installed might be different/stiffer than the ones used on the Mirage. Vendor Esauce didn't respond after asking for pictures. I'd appreciate any advice on fixing this issue.
-
Version 1.4.0
3,076 downloads
Rev 1.4.0 Replay ready -
-
red BLACKSYSTEMY97-LOGOEDITION-BY-EMY97-THEME-5
𝘉𝘭𝘢𝘤𝘬𝘚𝘺𝘴𝘵𝘦𝘮𝘺97 posted a file in DNA 75 Color, 250 Color
5_ecigtheme.93d000a9a71760394373d55e28f13914.png)
Version 1.0.0
165 downloads
NEW THEME LOGO EDITION BLACKSYSTEMY97 -
Version 4.0
1,280 downloads
Hier bekommt Ihr das Steampipes V4.0.0 Black&White und die Option das Theme mit zweitem Logo zu einer grauen Version umzustellen Theme mit Replay! Bewertung ist gern gesehen, Viel spaß wünsche ich SteampipesDNACV235black&white-replay-.ecigtheme- 1 review
-
- 1
-
-
- steampipes
- dna
- (and 5 more)
_ecigtheme.a048502650b7a90b9e7176d86ede3e5c.png)
_ecigtheme.8b87a507e260833c3c98d501efd2c052.png)
byJkronicle_ecigtheme.d85562e88ded66cd6183cd75cb3e5908.png)
5_ecigtheme.93d000a9a71760394373d55e28f13914.png)
