Nick Posted August 3, 2016 Author Report Share Posted August 3, 2016 Evolv is once again proud to announce our new DNA 250 board. The boards are available now in extremely limited quantities. Because of component lead times customers will be limited to 1 board per device that they plan to release plus one board as a spare. We expect this to improve as component lead times improve.The DNA 250 is the same size as the DNA 200, uses 3 cell series voltage input, utilizing the same mounting and layout for the buttons, screen, and USB with the addition of a few exciting features.-250 Watts max-55 Amp current output limit-2 Amp charging via Micro USB-Onboard reverse voltage protection-Higher current fuse-Smoother control system for Stainless Steel wire with Temperature Protection(This is a firmware update and is also available for the 200, giving it a similar control structure to the DNA 75)Spec sheets and models will be available some time next week.Individual retail quantity pricing is as follows:$80.00 Link to comment Share on other sites More sharing options...
Havensal Posted August 3, 2016 Report Share Posted August 3, 2016 Will these be up on the site soon? How do I get one? Link to comment Share on other sites More sharing options...
FenixNR Posted August 3, 2016 Report Share Posted August 3, 2016 How are we to get a hold of one of these? Link to comment Share on other sites More sharing options...
Russ ModCrate Posted August 3, 2016 Report Share Posted August 3, 2016 Any information available about the footprint so manufacturers can begin producing enclosures? Link to comment Share on other sites More sharing options...
Nick Posted August 3, 2016 Author Report Share Posted August 3, 2016 Nick said:The DNA 250 is the same size as the DNA 200, uses 3 cell series voltage input, utilizing the same mounting and layout for the buttons, screen, and USB with the addition of a few exciting features.Anything a 200 fits in, a 250 will fit in. Link to comment Share on other sites More sharing options...
Ghostrider Posted August 3, 2016 Report Share Posted August 3, 2016 Nick said:Smoother control system for Stainless Steel wire with Temperature Protection(This is a firmware update and is also available for the 200, giving it a similar control structure to the DNA 75)Any idea when the firmware for the 200 will be released? Link to comment Share on other sites More sharing options...
Nick Posted August 3, 2016 Author Report Share Posted August 3, 2016 Ghostrider said:Any idea when the firmware for the 200 will be released?As soon as our development team feels it is ready for the public which should be soon. Link to comment Share on other sites More sharing options...
Ghostrider Posted August 3, 2016 Report Share Posted August 3, 2016 Nick said:As soon as our development team feels it is ready for the public which should be soon.Thanks Nick. Link to comment Share on other sites More sharing options...
VapingModeration Posted August 3, 2016 Report Share Posted August 3, 2016 If we were to use a power supply, what are the new specs for that?If I use a 12V PSU, how many amps should it handle? Link to comment Share on other sites More sharing options...
Nick Posted August 3, 2016 Author Report Share Posted August 3, 2016 VapingModeration said:If we were to use a power supply, what are the new specs for that?If I use a 12V PSU, how many amps should it handle?30 amps minimum if you want the full performance. I'd over spec it a bit to account for sag under load from the PSU and loss due to the wiring. Link to comment Share on other sites More sharing options...
adolchristin Posted August 3, 2016 Report Share Posted August 3, 2016 Can't wait to get my mitts on some of these. I was getting ready to do another DNA200 build maybe I'll hold off for the DNA250. The 2A charging is going to be great. Link to comment Share on other sites More sharing options...
jake1191 Posted August 3, 2016 Report Share Posted August 3, 2016 Looks like I'll be waiting to replace my water fried dna200 board Link to comment Share on other sites More sharing options...
DNA Papst Posted August 3, 2016 Report Share Posted August 3, 2016 max 6 Volt like the dna200? Link to comment Share on other sites More sharing options...
954kevin Posted August 3, 2016 Report Share Posted August 3, 2016 im pretty new to the dna200. will this firmware update just automatically install once its released and i hook my mod up to escribe? im excited at the prospect of better performance using 316l in tc. im pretty happy with where ive got it but better is better! Link to comment Share on other sites More sharing options...
VapingModeration Posted August 3, 2016 Report Share Posted August 3, 2016 Thank you for the quick reply Nick.Will it still accept up to 15V(I think that was it) and if so, may I lower amperage respectively? Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted August 3, 2016 Report Share Posted August 3, 2016 nice, a non vaporshark evolv board with 2 amp charging. i dig it. Link to comment Share on other sites More sharing options...
Yellowhorse Posted August 3, 2016 Report Share Posted August 3, 2016 Great news!!Looking forward to getting a couple. Link to comment Share on other sites More sharing options...
VapingBad Posted August 3, 2016 Report Share Posted August 3, 2016 soulvape said:max 6 Volt like the dna200?The DNA 200 is max 9 V, only 6 V in 2 cell mode, IDK, but I imagine the max voltages will be the same and it will be a buck converter. Link to comment Share on other sites More sharing options...
mfj Posted August 3, 2016 Report Share Posted August 3, 2016 So where can we order one? Link to comment Share on other sites More sharing options...
mfj Posted August 4, 2016 Report Share Posted August 4, 2016 For everyone wondering:"Hello Martin,Thank you for your interest in the DNA 250. For purchasing details, please email Karen@evolvapor.com and be sure to include your full company name, examples of devices you manufacture, your shipping and billing information, and any applicable URLs related to your business and your products.DNA 250 quantities will be extremely limited until October 2016, and we appreciate your patience in acquiring boards this early in production.Thanks,Eric DEvolv, LLC" Link to comment Share on other sites More sharing options...
antyac2108 Posted August 4, 2016 Report Share Posted August 4, 2016 So it's going to be for manufacturers not normal modders until October? Link to comment Share on other sites More sharing options...
basilray Posted August 4, 2016 Report Share Posted August 4, 2016 954kevin said:im pretty new to the dna200. will this firmware update just automatically install once its released and i hook my mod up to escribe? im excited at the prospect of better performance using 316l in tc. im pretty happy with where ive got it but better is better!Yes, assuming you're connected to the internet and it's pushed as an update. Sometimes, the new firmware comes with an updated version of EScribe. If that is the case, it will be available the first time you plug in your mod after installation. Link to comment Share on other sites More sharing options...
Ginger Posted August 4, 2016 Report Share Posted August 4, 2016 Fantastic Chip and new features. Thanks Evolv!!![video]https://youtu.be/PVZa0DD7cps[/video] Link to comment Share on other sites More sharing options...
CeeBeeDee Posted August 4, 2016 Report Share Posted August 4, 2016 Thanks for the update on DNA 200 firmware Nick! Great job, Evolv, on getting the new boards on the market just in the nick of time. Very impressive. Link to comment Share on other sites More sharing options...
antyac2108 Posted August 4, 2016 Report Share Posted August 4, 2016 Yes evolv rocks and I can't wait to rock this DNA250 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now