Russ ModCrate

Members
  • Content Count

    26
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

About Russ ModCrate

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Russ ModCrate

    DNA 250

    Any information available about the footprint so manufacturers can begin producing enclosures?
  2. Russ ModCrate

    Max charge amperage

    Is there anyway to increase the charge amperage in Escribe or are we locked in at 1amp ?
  3. Russ ModCrate

    Larger Reference Case 1300mah

    Well we finally finished Mod Crate made a reference case that fits a 1300 mah battery. We also have on that fits a 2000 mah Maxamp they are being anodized at the moment. What do yall think? Should we keep going up or make a passthrough version now?
  4. Russ ModCrate

    Evolv reference case

    We are taking a little longer with the 1300 I hate to keep saying it but... Next week is what its looking like.
  5. Russ ModCrate

    Evolv reference case

    It is a different fitting that the evolv 510. The pictures were just color samples the threading will be done after anodizing on all the holes. The pictures were just color samples the threading will be done after anodizing on all the holes. We haven't decided on the bevels yet still playing around with different shapes. We will still not be tapping the board mount holes we will still not be tapping the board mount holes but we will continue to provide self tapping screws .
  6. Russ ModCrate

    Evolv reference case

    Hey everyone we have started responding to feedback and making adjustments accordingly. The board mounts will be deeper, we went with a custom 510 similar in design, made a larger version for a 1300 mah battery and, of course anodizing.
  7. Russ ModCrate

    Evolv reference case

    Ohhhh shiny
  8. Russ ModCrate

    Ti turning white in TC mode

    Titanium oxide is white maybe you have some bad connections somewhere
  9. Russ ModCrate

    Evolv reference case

    I'm not sure if they are manufacturing their own version from my understanding there have been some QA issues with the 510 and we are looking into manufacturing the connector ourselves. As of this moment yes protovapor is the best place to pick up the connector you do not need the mounting hardware with this case.
  10. Russ ModCrate

    Evolv reference case

    I suppose it would still prefer a solder joint to a mechanical connection any day.
  11. Russ ModCrate

    Evolv reference case

    You don't have to but if you tighten the boards down all the way it just meant buttons don't actuate very well so instead of having a questionable mechanical connection we ran solder
  12. Russ ModCrate

    Evolv reference case

    We are working on an adapter and spacer so FDV 510s can be used. If you do pick up a connector for protovapor you do not need the mounting hardware the 1/2" threading is plenty to retain the 510 you can just run some solder from GND out to the nearest mounting pad to make the electrical connection. These will be offered anodized at some point.
  13. Russ ModCrate

    Evolv reference case

    Visual update
  14. Russ ModCrate

    Evolv reference case

    Is that the total cost for importing or is that all an additional fee
  15. Russ ModCrate

    Evolv reference case

    Turn down for what?I misplaced a thousand or so negative buttons that may have ended up getting thrown out...