Monotremata Posted January 30, 2020 Report Share Posted January 30, 2020 8 hours ago, Wayneo said: In my old, tired mind it was never posted here, and not for Mac. It was Windows only, in a very non standard way published by LostVape to upgrade the Orion Go to the Plus version. The last version that was posted just a few replies above, from Evolv's own downloads, was clearly the Mac version as plenty of us grabbed it and are/were using it.. Wonder why Evolv took it down? Link to comment Share on other sites More sharing options...
Wayneo Posted January 30, 2020 Report Share Posted January 30, 2020 (edited) @MonotremataYou are correct there was a SP20! That version was never posted publicly as a Beta or with any notes. It just magically appeared as a direct download link. BUT I COULD BE WRONG AGAIN. Do you remember ANY notes/comments about it, or what did it fix for you? Edit: Why don't you PM a copy of it to him Edited January 30, 2020 by Wayneo Link to comment Share on other sites More sharing options...
DJT Posted January 30, 2020 Report Share Posted January 30, 2020 I would if I still had the installer.. but I'm afraid I don't! It was November 2018.... but if anyone else can help... please do so. I'm also puzzled as to why SP20 was pulled, it's worked perfectly for me on both High Sierra and Mojave... I won't go to Catalina yet... it's a shambles! Link to comment Share on other sites More sharing options...
Monotremata Posted January 30, 2020 Report Share Posted January 30, 2020 35 minutes ago, Wayneo said: @MonotremataYou are correct there was a SP20! That version was never posted publicly as a Beta or with any notes. It just magically appeared as a direct download link. BUT I COULD BE WRONG AGAIN. Do you remember ANY notes/comments about it, or what did it fix for you? Edit: Why don't you PM a copy of it to him I honestly don't have any clue about it, I dont think anyone knew it existed until it was posted here. I started having issues way back with SP17 on my Mac with the app crashing when I tried to access do anything. I couldn't even backup the firmware before it crashed, and sending themes to it actually soft-bricked it once when it shut down in the middle of the transfer. I had resorted to using a virtual Windows machine on my Mac SP20 was posted way back. It basically let me use my DNA75 as it was again. Its too big to post here otherwise I would've earlier. I can post it somewhere as long as Evolv isn't gonna call the cops on me or anything hah. Im guessing they removed it for a reason but if its cool Ill put it up, I still have the installer. Link to comment Share on other sites More sharing options...
DJT Posted January 30, 2020 Report Share Posted January 30, 2020 May I suggest somesite like gofile.io ? Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 30, 2020 Report Share Posted January 30, 2020 Is this what you folks are looking for? https://downloads.evolvapor.com/SetupEScribe2_SP20_INT.pkg Link to comment Share on other sites More sharing options...
Monotremata Posted January 30, 2020 Report Share Posted January 30, 2020 27 minutes ago, dwcraig1 said: Is this what you folks are looking for? https://downloads.evolvapor.com/SetupEScribe2_SP20_INT.pkg It would be if it was actually still up on the server. Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 30, 2020 Report Share Posted January 30, 2020 59 minutes ago, Monotremata said: It would be if it was actually still up on the server. Gee, I guess I should have tried to download it. Link to comment Share on other sites More sharing options...
copyman Posted January 30, 2020 Report Share Posted January 30, 2020 (edited) Edited January 30, 2020 by copyman 1 Link to comment Share on other sites More sharing options...
Lisko Posted April 19, 2020 Report Share Posted April 19, 2020 On latest version of macOS there is a bug with ecigstats. If open it and then minimize it to the menu bar, then if later on I want to reopen it by clicking on its icon and then on "open ecigstats" nothing happens and I'm forced to close it and then reopen it from escribe suite. Not a huge problem but it is handy to leave it in background and when I connect the box for charging automatically synchronize my puffs. Not having this problem when I was using previous major version of macOS. Link to comment Share on other sites More sharing options...
James Posted December 7, 2020 Report Share Posted December 7, 2020 I've posted SP24, adding Evolv Reflex support. Let me know how it works for you. Link to comment Share on other sites More sharing options...
Wayneo Posted December 7, 2020 Report Share Posted December 7, 2020 Thanks @James!Well fellas, here's my 2 cents. For now you can get the firmware and escribe herehttps://www.evolvapor.com/escribe There are no mod firmware updates for the 2xx series boards at this time. Here's the current firmware listing included (there might be one or 2 missing in your folder but they're old) Edit: Quick look around on my 10.14.6 box. I'll check 10.15.X later Link to comment Share on other sites More sharing options...
DJT Posted December 7, 2020 Report Share Posted December 7, 2020 Why does this new version try to get you to allow access to a program that records your keystrokes? When I installed it my Mac threw up a warning dialog box, I denied access of course but can someone please shed some light on this? Link to comment Share on other sites More sharing options...
James Posted December 7, 2020 Report Share Posted December 7, 2020 It's just that I use /bin/sh scripting (Terminal) to launch things. (Older versions of MacOS didn't say this.) I just need to code up a special launcher that isn't a script, to get rid of that popup. Will do it when I get time. You can click Deny. It won't cause any problem at all, since it doesn't actually try to read keystrokes. 1 Link to comment Share on other sites More sharing options...
DJT Posted December 7, 2020 Report Share Posted December 7, 2020 I thought that might be the case! Always best to check though, especially as the Mono framework has had Mac Malware inside it in the past y'know? Cheers! Link to comment Share on other sites More sharing options...
blueridgedog Posted December 8, 2020 Author Report Share Posted December 8, 2020 21 hours ago, James said: I've posted SP24, adding Evolv Reflex support. Let me know how it works for you. Thank you sir. Any manufacture you know of putting a DNA75c in a decent mod? Link to comment Share on other sites More sharing options...
Monotremata Posted December 10, 2020 Report Share Posted December 10, 2020 SP24 is working great in Big Sur! Got no prompts for access here, but I may have already done that running the previous one. Link to comment Share on other sites More sharing options...
Lucifer Posted July 7, 2021 Report Share Posted July 7, 2021 sp24 don't work in osx 10.11.6 ... any solution ? Link to comment Share on other sites More sharing options...
Lisko Posted August 11, 2021 Report Share Posted August 11, 2021 Why couldn't we have latest sp27? Even Linux users have it Link to comment Share on other sites More sharing options...
BillW50 Posted August 11, 2021 Report Share Posted August 11, 2021 I dunno, maybe because Apple demands high licensing fees and Linux has no fees? Isn't that how it works? Link to comment Share on other sites More sharing options...
copyman Posted August 11, 2021 Report Share Posted August 11, 2021 Преди 1 час, Lisko написа: Why couldn't we have latest sp27? Even Linux users have it I have the same question! Link to comment Share on other sites More sharing options...
Wayneo Posted August 11, 2021 Report Share Posted August 11, 2021 No Bill, no licensing fees. Other than paying to be a Developer which was super cheap. There is a lot of shareware or freeware out there. But for even more details, this explains things better by reading the highlighted 'Important' box. https://developer.apple.com/documentation/security/notarizing_macos_software_before_distribution But waiting months is funny not funny. 🙃 1 Link to comment Share on other sites More sharing options...
BillW50 Posted August 11, 2021 Report Share Posted August 11, 2021 It used to be if you used an Apple logo and say Apple compatible, you needed to license it through Apple. I'm glad things changed. I guess they are still taking 30% of a developer's profits for an Apple App. Link to comment Share on other sites More sharing options...
Wayneo Posted August 11, 2021 Report Share Posted August 11, 2021 38 minutes ago, BillW50 said: I guess they are still taking 30% of a developer's profits for an Apple App. Escribe is an Apple App. It's free. If a developer wants to use the app store to market their wares, some are totally free, some have a cost ..... advertising or money. They only get their 'cut' from the ones on the App store. 😉 Just saying, but I've never had an update ever pushed without my knowledge 🤣 Link to comment Share on other sites More sharing options...
Lucifer Posted August 11, 2021 Report Share Posted August 11, 2021 (edited) I understand about apple, but EScribe is from Evolv and they are not solving my problem. Edited August 11, 2021 by smith77 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now