Jump to content

Let's see your 75's!


dwcraig1

Recommended Posts

My first DNA75, I have another in the works. This is 3D printed from Shapeways, my design, with an Avid 510 and Keystone battery contacts. Painted with Duracoat ceramic paint. Every other mod I have made has been black or dark grey, wanted some color in my collection. Comes out at 1.5"W x 1"D x 3.8"H. 
20160725_152837.jpg  20160725_152833.jpg  20160725_152317.jpg  20160727_091437.jpg  20160727_102824.jpg 

Link to comment
Share on other sites

Lost Vape Therion. My first DNA device Purchased because of the dual 18650 Parallel configuration. Still learning my way around the Escrib, for the most part self explanatory. Battery type set to 18650 but the stock soft cutoff threshold seems a bit low at 2.75, still researching that part. Just received it a few days back so I'm still spelunking the software.

8-19-2016_Clark's_Therion_DNA_75.jpg 

Link to comment
Share on other sites

Clark "Toban" Robbins said:

Lost Vape Therion. My first DNA device Purchased because of the dual 18650 Parallel configuration. Still learning my way around the Escrib, for the most part self explanatory. Battery type set to 18650 but the stock soft cutoff threshold seems a bit low at 2.75, still researching that part. Just received it a few days back so I'm still spelunking the software.

8-19-2016_Clark's_Therion_DNA_75.jpg 

welcome to the forum clark"toban"robbins. nice therion, i'm sure you'll love it. you should leave the soft cutoff where it is. that's 2.75v when under load not resting voltage. you could run into premature "weak battery" issues raising the cutoff. keep in mind, most 18650/26650 battery manufacturers test their batts down to 2.5v so 2.75v is perfectly safe.
Link to comment
Share on other sites

  • 2 weeks later...
TheMadKracker said:

My first DNA75, I have another in the works. This is 3D printed from Shapeways, my design, with an Avid 510 and Keystone battery contacts. Painted with Duracoat ceramic paint. Every other mod I have made has been black or dark grey, wanted some color in my collection. Comes out at 1.5"W x 1"D x 3.8"H. 
20160725_152837.jpg  20160725_152833.jpg  20160725_152317.jpg  20160727_091437.jpg  20160727_102824.jpg 

Link to comment
Share on other sites

MegaVape said:

VT75 Nano

IMG_20160730_180826.jpg

How's your battery cap doing? I had bought and then all right when it first came out and I'm not sure if it was just mine but the battery cap was crap. An unsuspecting person could easily strippedd evenanse growing it much less threading it in. So I think I took maybe twenty seven hits before I put it up on eBay because I knew was a matter of time before I stripped it out and I'm ultra careful when I screw stuff and I always back it out and toilet seats and seriously I'm not sure if it's the material or tolerances but the battery cap on mine was a joke compared to the one on my vt75
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...