retird

SP2 was a previous early version during beta testing I think.... You can get SP3 here (Early release) /topic/66731-topic/?do=findComment&comment=900118

The pack should be discharging at about the same rate from each cell. Thinking the battery pack needs replacing or maybe defective wiring...., Since it has done this since it was new you might contact your vendor ....here is a screenshot showing what my battery discharge per cell is..:

I really see no botched chip...... Evolv seems to provide accurate spec's on efficiency variances between "buck" (97%) and "boost" (85%) technology. Looking at the spec sheets of some China chips I see that the efficiency ratings of "buck", "boost", and "buck-boost" are identical (93%).... I am inclined to question the validity of the China spec sheets, so maybe someone can answer my questions. My questions are: ..... How is it possible to have identical efficiency no matter what the technology employed with China chips? Could the 93% efficiency rating be only the average of efficiency over all technologies (buck, boost, and buck-boost)?

Don't recall ever hearing of a DNA frying a computer and I have charged Evolv stuff for at lest 5 years now from computers via USB...... I checked mine again and when I fire the DNA while charging the charging amps drop to 0.002amps and rise again when no longer firing. So I guess your DNA charges normally now via the computer?

So what fried on the computer? What is your DNA battery level?

Curious how you are verifying age? Are you requiring a Government ID?

Yep PayPal...... so I went to ebay and ordered the same Vape Supplies without issue and was within 30 cents of the Twenty-dollar order that I cancelled...

Yep. but since my identity has been stolen 3 times in a year I hesitate...... I replied back with my current age (way over 40) (no photo Government ID was given) and told them if that wasn't sufficient then just refund my purchase and cancel the order.... They replied back that my order was cancelled and a refund given.... So if this is going to be the drill in the USA than they are driving internet sales to China I think...

@2legsshrt, as you know the DNA technology is not the same as the SX you are used to using. The SS316 EScribe works very well once you set your settings to get the vape you want. You may not get the same vape using the same temp/wattage/etc you set on the SX. You just need to adjust the settings accordingly to achieve the same vape as the SX. Here is a screenshot of EScribe SS316 profile I use. The temp is currently 400F, wattage set at 25 watts, preheat set at 60 watts/punch 5/duration 1s. I am using a SS316 Notch Coil with a ohm's reading of 0.25. Note the smooth temp line. The Temp Protect is not an error message it just lets you know the temp setting has been reached. This Device Monitor screenshot is using the DNA200 but my DNA75's are set the same and have the same smooth temp graph ......

ENOUGH........ warning.......

Made a small internet order/pourchase of vape supplies and got this notice to verify age: Thank you for your order. Unfortunately your order has been put on a temporary hold for further verification. We do apologize for the inconvenience. In accordance with the new FDA regulations, all orders must be verified for age. We have partnered up with Veratad Technologies, a world class provider of online/real-time Identity Verification and Knowledge Based Authentication Solutions to ensure all customers meet the legal smoking age of the state in which they reside. Some possible reasons why your order has been selected for further verification: 1) You've recently moved 2) Your billing address has not been updated with your credit card or bank's system 3) A typographical error with either your address or name 4) A pre-paid gift card was used to make this purchase 5) Someone in household with same name (e.g.: father/son scenario) 6) Target is deceased 7) Foreign customer We require a photo or scan of your government issued I.D to verify your age. The easiest solution would be to take a photo of your I.D. with your cellphone and replying back to this email with the photo attachment. Any photos or scans of your I.D. will be deleted within 72 hours of verification. You may block out personal information such as your picture. All that is required is your name, address, and your date of birth. Once your age has been successfully verified, any future orders under your account will not be subject to any further verification process for a seamless checkout experience. Thank you for your cooperation and patience. Do not hesitate to contact us with any questions. Thank you for choosing myvaporstore and have a great day! Sincerely, Sarah S. | Customer Support info@myvaporstore.com

The DNA75's had a very smooth vape with SS316 already and the v1.2sp3 improved the smoothness of the DNA200 using SS316. I'm running SP3 and it's working great and smoothed out my 200's.

Can you post a screenshot of Device Monitor (while firing the device) that shows "Cell 1, cell 2 and cell 3" "Current" and "Voltage".....

For a DNA40 type vape on a DNA200:Set Preheat at 45WSet Punch at 5

Go to Mod> Mechanical> Click "Switched" and upload settings to device....

I think you are headed in the right direction in making the DNA40/DNA200's have similar experiences. IIRC a modder I know came up (a long time ago) with "basic deviation formula" to achieve what you are wanting. If I recall correctly it had to do with pre-heat, punch, duration, and temp setting variations. I can't remember what it was now so I've e-mailed the modder to ask for the info. Should I get a reply I'll post it here...

1. Poor installation of the batteries. 2. Poor connection of the batteries. 3. Poor wiring of the battery sled. 4 Defective battery posts on the battery sled. 5. Dirty contacts of the battery +/_. 6. Dirty contacts on the battery sled +/_. Were the batteries a "married" set. Always used as a pair thus charged and discharged as a set?

Sounds like the parallel battery sled is only giving power from one battery. When you tried to power the device with one battery did you try this one battery in each battery slots and see if it would fire??

About the only other things I can think of is to check for is a bad display such as a cracked display, possible ribbon problem (fractured runs) in the ribbon, or connection of ribbon to the board. At any rate might be worth filling out a "Contact" at Evolv and maybe they could look at it...

Are your devices set to "Maximize Recharges" ? Max charge will be 4.10 Are your devices set to "Maximize Puffs"? Max charge will be 4.20

hum.... all capital letters...

Why not just run "Battery Analyzer" ? That should analyze your battery capacity and discharge profile.

Only buttons required to lock the power are the up/down buttons.... hopefully @66misfit got it going....he hasn't been back here since May 9th....

Turning off Temp Protect is fine on Kanthal.... try turning down the wattage and see if the flavor returns....looks like you are running the coils at the upper ranges recommended... TF-T3 (Triple Coil)0.2? (40W - 130W)TF-Q4 (Quad Coil)0.15? (40W - 130W)TF-R1 (Rebuildable Single Coil)0.85?TF-R2 (Rebuildable Dual Coil)0.25?TF-N2 Standard Core (Ni200 Coil)0.12? (400°F - 600°F)TF-N2 Air Core (Ni200 Coils0.12? (400°F - 600ºF)Two Added Airflow Holes For Airier DrawTF-T2 Standard Core (High Resistance)1.5? (20W - 45W)TF-T2 Air Core (High Resistance)Two Extra Airflow Holes For Airier Draw1.5? (20W - 45W)TF-Ti Standard Core (Titanium Dual Coil)0.33? (450°F-600°F)TF-S6 (Sextuple Coil)0.4? (30W - 100W)

Saw this test of your battery: https://www.e-cigarette-forum.com/forum/threads/awt-75a-4500mah-26650-bench-test-results-only-a-10a-battery.703276/