multiple ui Gauges - Major update 2.0.0 2.2.0

thank you make theme i use really good!

i have some question.

i press and hold the fire button while the screen off, the screen will be briefly broken and the lock screen will appear. Firmware issue?

i use  250c paranornall^^

Hello. Using this theme, DNA75C doesn't show live amps while charging (it's OK while using USB connection to PC, when "Data" appears - it shows the amps).

Basically, it shows 0 amps while charging off power, even though the percentage of the battery indicates the charge goes up. Not the case with Lost Vape or Standard theme

Edited September 11, 2018 by Fatalution

On 9/11/2018 at 8:44 AM, Fatalution said:

Hello. Using this theme, DNA75C doesn't show live amps while charging (it's OK while using USB connection to PC, when "Data" appears - it shows the amps).

Basically, it shows 0 amps while charging off power, even though the percentage of the battery indicates the charge goes up. Not the case with Lost Vape or Standard theme

Hey man sorry it took me a while to get back to you

Just to clarify you can see the amps when the status is "USB DATA ON",  but it shows 0 amps when when the status  is "Charging"? Is it 0.0 to be precise?

I just downloaded the latest version (2.2.0) from this page and flashed it on three DNA75c devices. All of them show the live amps when charging via a wall outlet. It shows inside the battery icon like shown in the attachment. 

Sometimes it takes a bit of time before status changes and/or the amp is displayed. Have you tried waiting a little bit and coming back to check it?

Edited September 14, 2018 by SirTimmyTimbit

On 9/4/2018 at 11:03 AM, parrot said:

thank you make theme i use really good!

i have some question.

i press and hold the fire button while the screen off, the screen will be briefly broken and the lock screen will appear. Firmware issue?

i use  250c paranornall^^

Sorry about the delayed response parrot

Most likely, I cannot reproduce it on my end. I have not heard this complaint from anyone else either. May be try redownloading and reflashing the theme?

Edited September 14, 2018 by SirTimmyTimbit

On 7/29/2018 at 4:43 AM, joeblowma said:

Something (maybe?) worth fixing, the puff counter in the little graph screen is only wide enough for 9999. When you go over that it does this aweful wrap that only shows the bottom half of the top row and the top half of the next row. For whatever reason that number is tied to historic puffs on device and does not reset with the puff counter... though I doubt it actually collects info for 10k+ puffs, that seems like a big waste of flash since we can't really access this data in any way past the tiny screen graph. For personal usability I tied the little i icon on the main screen to that graph, and set the back button to be the default selection instead of the back arrow so I noticed it pretty quick when I hit 10k puffs.

 

Thanks for the great theme SirTimmyTimbit!

I am so sorry for the delayed response man I get a notification when someone posts a comment, sometimes I forget about them when I get home

I left that screen pretty much untouched from the stock theme. I didn't even think to check for the size. There's plenty of room to fit at least 6 digits there (~1 Million puffs), I'll fix it in the next update. 

Thanks man!

No worries! It was just something I stumbled on at the beginning (have since learned there actually is a way to download the puff recordings through Device Monitor, which was equally unhelpful) of my attempt to get as close to the bottom of interrupted TC puffs as I could, it was quite easy to tweak the box size but I figured I should mention it.

11 час назад, SirTimmyTimbit сказал:

Hey man sorry it took me a while to get back to you

Just to clarify you can see the amps when the status is "USB DATA ON",  but it shows 0 amps when when the status  is "Charging"? Is it 0.0 to be precise?

I just downloaded the latest version (2.2.0) from this page and flashed it on three DNA75c devices. All of them show the live amps when charging via a wall outlet. It shows inside the battery icon like shown in the attachment. 

Sometimes it takes a bit of time before status changes and/or the amp is displayed. Have you tried waiting a little bit and coming back to check it?

Basically it sits on "Discharging", even though the percentage goes up. Didn't change in 1 hour

There is a thread elsewhere called "Throttling" which has been deduced to be an issue with this theme on TC profiles.  I and many others using this theme with Replay mode have run into a problem where the cotton is sufficiently wet, no spots for the coil to glow and we get the "throttling" message when it shouldn't be happening.  I won't leave a review until this is looked into as I don't want to lower the review rate you have with this theme because other than that issue, I love it.

20 minutes ago, ASaabDudeSC said:

There is a thread elsewhere called "Throttling" which has been deduced to be an issue with this theme on TC profiles.  I and many others using this theme with Replay mode have run into a problem where the cotton is sufficiently wet, no spots for the coil to glow and we get the "throttling" message when it shouldn't be happening.  I won't leave a review until this is looked into as I don't want to lower the review rate you have with this theme because other than that issue, I love it.

Throttling is when you hit Temp Protection on a DNA Color Chip, how is your Profile set up, are you using a Watt Profile or a TC Profile, what is your coil ohm, how many watts are you using.

Funny out of all the comments on this thread, you are the only one with this problem!

1 hour ago, ASaabDudeSC said:

There is a thread elsewhere called "Throttling" which has been deduced to be an issue with this theme on TC profiles.  I and many others using this theme with Replay mode have run into a problem where the cotton is sufficiently wet, no spots for the coil to glow and we get the "throttling" message when it shouldn't be happening.  I won't leave a review until this is looked into as I don't want to lower the review rate you have with this theme because other than that issue, I love it.

Yah I'm aware of that thread. I'm subscribed to it as well. 

I'm not sure why that's happening. Nothing in any theme should be able to affect something to the magnitude of detecting a false positive on resistance reading. 

It's also not happening to all the units. Just some. I haven't run into it using any of the 4 DNA color devices I have, and neither has most of the people I've asked about it.

Compared to previous versions, only a small amount of fields update when you're firing in Gauges 2.2.0. Only thing that this theme does different than other themes is it displays the  status when you're firing only. May be you can try replacing that field with one that shows the status at all time.

In any case this is something you should ask Evolv, why would a theme be able to trigger false positive readouts more than other themes?

On 9/14/2018 at 3:28 PM, Fatalution said:

Basically it sits on "Discharging", even though the percentage goes up. Didn't change in 1 hour

I'm not sure what's going on man. I can't reproduce it on my end. May be try a factory reset?

10 hours ago, Vapin said:

Throttling is when you hit Temp Protection on a DNA Color Chip, how is your Profile set up, are you using a Watt Profile or a TC Profile, what is your coil ohm, how many watts are you using.

Funny out of all the comments on this thread, you are the only one with this problem!

Yeah, I know what it is.  Nobody has mentioned it here on the theme page but there is another thread here talking about it which I found after running into the problem.  Over in the other thread, they think it has something to do with the theme using up all the off board memory but I'm not that technical so I can't say if that is what might or might not be causing it.  Several other people and I had found out we are all using this theme which is what leads us to believe Gauges is what's causing it, we just don't know why.  Fortunately I found something that works for me indefinitely until I take the batteries out, working at a vape shop, that's quite frequent so I just carry around a .5/1A portable charger that I use now so I just do pass through charging.  I still won't fault the theme because other than that problem, I absolutely love the theme.

I cant figure out how to use replay with a ni80 coil. I have it on replay mode and I take a puff but dont know how to save and play that hit again..

Keep trying man and if that doesn't work try reading directions lol,. Cant temp control a ni80 or kanthal coil

 

 

37 minutes ago, CripSkillz said:

Keep trying man and if that doesn't work try reading directions lol,. Cant temp control a ni80 or kanthal coil

 

 

The last update says you can use replay with any coil material

17 minutes ago, Oroboros said:

The last update says you can use replay with any coil material

Previously there was a check on the theme that hid replay UI if the coil material wasn't temp control compatible. 

I removed that check with the update. If you enable replay on a profile using a Ni80 material you should be able to see the replay UI. Make sure replay is enabled by going to the atomizer profile screen.

If it doesn't let you save a puff then it's a hard firmware check.

Edited October 6, 2018 by SirTimmyTimbit

10 hours ago, SirTimmyTimbit said:

Previously there was a check on the theme that hid replay UI if the coil material wasn't temp control compatible. 

I removed that check with the update. If you enable replay on a profile using a Ni80 material you should be able to see the replay UI. Make sure replay is enabled by going to the atomizer profile screen.

If it doesn't let you save a puff then it's a hard firmware check.

I’m able to get to replay ui  but when I take a puff there’s nothing that ask me to save that hit or how do I save a hit I like?

What i see is my setting “45W” a grayed out save icon to the right of it and under the replay warmth and under that it reads “replay” to tell you what profile your in. I checked my firmware and its 2.2.0 

I checked the atomizer profile and replay is enabled and boost is disabled

If you use a coil of any type it will work if there is one wire of SS or nickle in the coil it will temp sence and work.. not much to it just to do it with the right wire..

Edited October 6, 2018 by CripSkillz

Thank you for your work today I will try this theme but I'm already sure it will be as valid as your other works that I appreciated so much. I hope to see other news or updates soon.

No sure if its be asked, its a long thread to read. Is it possible to swap wattage and temp in the UI automatically when using temp control?

Same remark as DarthVapor1970, swapping watts and temp would be great.

I got my first DNA mod(Paranormal 250C) few weeks ago. This is the best theme for sure. Looks nice and all the options are available, nice job!! 😎

Edited March 15, 2020 by Delperic

А ты не мог бы ПО ставить last puff live puff над дисплеем на первую страницу чтоб переключить градусы  ,нету функции переключения градусов . А то приходится отключать повтор функцию  постоянно полностью 

Can i use this as is for the new DNA 100C ?