Michael Guercio Posted May 5, 2021 Report Share Posted May 5, 2021 I just got a boxer 100c. But having issue's. Main one is, I'll have it set at 60wts but sometimes it fires at 32wts. I don't see any 100c threads 1 Link to comment Share on other sites More sharing options...
Wayneo Posted May 5, 2021 Report Share Posted May 5, 2021 You are correct, good sir. You are the first, and I'll move this post once the area is created.Can you add some more words to "... sometimes it fires at 32wts." Can you post a pic of the Profile settings and whatever other screen pages might help, and what was the battery voltage when that happened 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 5, 2021 Author Report Share Posted May 5, 2021 Ok. I believe it was because I had too low of ohms (.2) and even tho batt level said 37% the batt volt was around 3.5 so guess that was the issue. But it's weird because sometimes it would fire Link to comment Share on other sites More sharing options...
BillW50 Posted May 5, 2021 Report Share Posted May 5, 2021 After a heavy drain, batteries tend to bounce back a little and could supply a larger surge if you wait a bit. Of course, it will be short lived. 2 Link to comment Share on other sites More sharing options...
Wayneo Posted May 5, 2021 Report Share Posted May 5, 2021 21 minutes ago, Michael Guercio said: ........ But it's weird because sometimes it would fire When that occurs (battery sag hits the 'cell soft cutoff' value, on your screen (depending on theme) you might see a 'weak battery' warning, letting you know it's soon time to change the battery. Added: What kind of battery are you using? For single battery mods I've always suggested/preferred high Amp batteries over mAh, because of less battery sag while firing. 1 Link to comment Share on other sites More sharing options...
James Posted May 7, 2021 Report Share Posted May 7, 2021 I've posted up an EScribe Suite version that can connect to the 100C: Open up Device Monitor in it, and see if the Battery Voltage is hitting 2.75V. That'll tell you if it's a weak battery issue or something else. 1 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 7, 2021 Author Report Share Posted May 7, 2021 Ok great!! I sure will👍🏻Ty! On way home now so I'll check soon as I get in.... 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 8, 2021 Report Share Posted May 8, 2021 Here I have EScribe's Device Monitor open and a DNA60 connected. I have taken a puff and hit the pause button. Then by hoovering the mouse curser over areas on the graph it will show the values at any given point. Note my cell was at about 4.1 volts before I fired it at 45watts preheat then 35 watts. During the 45 watt firing the cells voltage dropped to 3.52 volts. 3 Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 9, 2021 Report Share Posted May 9, 2021 Hi, I also have a boxer 100c, and sometimes after the screen goes black, it hits at 43 watts instead of the 85 watts I have it set on. Is this some sort of battery protection thing? It doesn’t always happen, but when it does it makes me think something is wrong with this awesome vape and pisses me off 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 9, 2021 Author Report Share Posted May 9, 2021 I know exactly what u mean. I told ginger vapor and he said the mod should be used with a .4 and up... So it having a 100wts makes no sense to me. Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 9, 2021 Author Report Share Posted May 9, 2021 Mine does it with a .2 at 60wts. Samsung 30t. I just put a .37 and it's fine. I can vape it a 40wts til batt hits around 3.4v. Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 9, 2021 Report Share Posted May 9, 2021 Ohhh. Yeah I use a 40t. I had like a .2 something and now I’m using a .15 mesh rta so it only needs like sixty five watts or so, it doesn’t happen as much 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 Also try in stealth mode & see if still happens... Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 10, 2021 Report Share Posted May 10, 2021 Does it fuck up for you on stealth mode? Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 No... It's works great in stealth. Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 Just for the hay of it plz try a .3 and above to see if still does that. Try a .4 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 Mine just did it.. But my batt is almost dead at a 3.59v. It's set at 50 & it fired at 16wts 2x in a row. But it's weird how it will go back to firing 50wts. My watts will start to throttle down now that im below 3.56v Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 And im not getn the "weak batt" signal yet. Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 10, 2021 Report Share Posted May 10, 2021 Do you think this is some kind of defect? Or it’s supposed to do it? Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 I honestly think the board may need tweeked via escribe. But mine has been great besides the few times it doesn't fire 100% at 37% batt/3.59v. My other single batt mods fire 100% of the wattage down to 3.4v. Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 10, 2021 Report Share Posted May 10, 2021 I tried to connect it to escribe, but the choice to connect a 100c isn’t on there.. you think it will be soon? 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 But im no expert so it could be like that... Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 I heard it was coming soon. Im sure someone who reads this could be more helpful. Im sorry. Good talking to you & I'll try to get much info as possible on our situation... Link to comment Share on other sites More sharing options...
Joshua12345 Posted May 10, 2021 Report Share Posted May 10, 2021 I appreciate it man 1 Link to comment Share on other sites More sharing options...
Michael Guercio Posted May 10, 2021 Author Report Share Posted May 10, 2021 See my batt at 3.53v and still getting my 50wts. So it should've never fire at 16wts them 2 times at 3.58v. See to me thats not normal. And didn't get "weak batt" when hit at 16wts. Im now at 3.51v and still getn the 50wts!! So im so confused on why it hit at 16wts them couple times. Weird Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now