Wick Posted July 31, 2015 Author Report Share Posted July 31, 2015 Keep meaning to ask this... I've noticed a significant difference of the screen "whiteness" between sample boards and Opus200 screen. The opus is a hell of a lot "whiter" than both the two sample boards from Evolve and the pair I purchased from a distributor. Much proffering the Opus200 crispness (lack of blue). Both are set to 100% brightness through Escribe. Brandon, can I get the "Opus" screens when ordering qty? Oh and how can I get a replacement screen or two? I killed one bending the flat wire, like an idiot, far too close to the screen edge... o_O Thanks, Wick Link to comment Share on other sites More sharing options...
Brandon Posted July 31, 2015 Report Share Posted July 31, 2015 Hmm, Opus uses the same screens everyone else uses. Even came out of the same batch we received. Are you certain the Nickel case isn't making it appear brighter? Link to comment Share on other sites More sharing options...
Wick Posted July 31, 2015 Author Report Share Posted July 31, 2015 Hey Brandon, Yep positive... Black Opus200 comparing to Black Shapeways printed case. I noticed this and thought the same, I thought I was possibly seeing a difference of it against the black Opus case and a loose "air mod" (when I was still chip vaping it) both are mounted against black... It's distinct I'll get you over a pic. Best, Michael Link to comment Share on other sites More sharing options...
John Posted July 31, 2015 Report Share Posted July 31, 2015 Hope there isn't a problem with one or the other, we keep about 50k pieces of the screen in stock at any given time and I do NOT want to have to have someone go through them all. Link to comment Share on other sites More sharing options...
Always_Jonezen Posted July 31, 2015 Report Share Posted July 31, 2015 The seven I bought from Protovapor.com in 3 separator orders all were the same color. Link to comment Share on other sites More sharing options...
Wick Posted July 31, 2015 Author Report Share Posted July 31, 2015 Always_Jonezen said:The seven I bought from Protovapor.com in 3 separator orders all were the same color. Yep two of mine are from Protovapor as well, they are consistent with each other and with the boards received Directly from Evolv. Link to comment Share on other sites More sharing options...
Wick Posted July 31, 2015 Author Report Share Posted July 31, 2015 John said:Hope there isn't a problem with one or the other, we keep about 50k pieces of the screen in stock at any given time and I do NOT want to have to have someone go through them all. Oh dear god no... That's a few screens!! Link to comment Share on other sites More sharing options...
Wick Posted July 31, 2015 Author Report Share Posted July 31, 2015 Incredibly hard to capture, yet distinctly different to the eye!!! Got to figure how to shoot this best to show it. OK... This is a decent representation of what I'm seeing. Link to comment Share on other sites More sharing options...
Noixd Posted August 4, 2015 Report Share Posted August 4, 2015 [QUOTE=Wick]Incredibly hard to capture, yet distinctly different to the eye!!! Got to figure how to shoot this best to show it. OK... This is a decent representation of what I'm seeing. I just purchased a Hana V200 and a Opus 200 and having the same issue. The phantom black V200 has the white screen and my nickel opus has a green screen. Is there a way I can get the white screen on the opus? Link to comment Share on other sites More sharing options...
macz Posted August 4, 2015 Report Share Posted August 4, 2015 Probably opus using some kind tinted film to protect the screen? I've seen dna200 mod using orange tinted film. Link to comment Share on other sites More sharing options...
blueridgedog Posted August 4, 2015 Report Share Posted August 4, 2015 Are they each set to the same brightness in escribe? Link to comment Share on other sites More sharing options...
Gm111 Posted August 4, 2015 Report Share Posted August 4, 2015 macz said:Probably opus using some kind tinted film to protect the screen? I've seen dna200 mod using orange tinted film. The opus is exactly like the screens I've seen everyone using, it's the one in the shapeways enclosure that's odd Link to comment Share on other sites More sharing options...
Gm111 Posted August 4, 2015 Report Share Posted August 4, 2015 blueridgedog said:Are they each set to the same brightness in escribe? He does say this in OP Link to comment Share on other sites More sharing options...
blueridgedog Posted August 4, 2015 Report Share Posted August 4, 2015 Just double checking...I am now down to measure four times and cut once. If they are then it has to be a film. Link to comment Share on other sites More sharing options...
Wick Posted August 4, 2015 Author Report Share Posted August 4, 2015 I believe we are just looking at variation here between production lots on screens. Best, Wick Link to comment Share on other sites More sharing options...
John Posted August 5, 2015 Report Share Posted August 5, 2015 Most likely just different lots with different batches of phosphors. They're all supposed to be white, and they always look bluer in pictures than they look to me in real life, even when I take the pictures. Link to comment Share on other sites More sharing options...
alee132 Posted August 5, 2015 Report Share Posted August 5, 2015 If this is the worst of the issues you would be doing good imo. Link to comment Share on other sites More sharing options...
John Posted August 5, 2015 Report Share Posted August 5, 2015 Can't argue with you there! Link to comment Share on other sites More sharing options...
Wick Posted August 5, 2015 Author Report Share Posted August 5, 2015 Agreed! So true they look way blue'er in pics, it was nearly impossible to capture the more "white" one (more purple hue compared to others). Had to put them on a strange angle, and it still didn't do it justice. Many pics I tried had them both just looking blue in the photo. In any case they are both very acceptable colors, both nice, both clean. Would not have noticed anything if I didn't have them lit side by side. Wick Link to comment Share on other sites More sharing options...
blade Posted November 3, 2015 Report Share Posted November 3, 2015 Noticed the same thing. Currently have 2 lavabox mods one screen seems to be more blue other more yellow or white. The settings are the same on both mods. Does it mean that there are different versions of dna 200 chip itself? It's hard to tell from the picture. Link to comment Share on other sites More sharing options...
alphaxkaz Posted April 25, 2016 Report Share Posted April 25, 2016 Ive noticed the same betwenn mine and two of mates Wismec Reuleaux theirs have a bluer hue where as mine is more white I wouldn't have even noticed untill we put them side by side Link to comment Share on other sites More sharing options...
black lace Posted April 25, 2016 Report Share Posted April 25, 2016 Yes ive got three sky blue and one nice white one which i believe to be a true monochrome, there have been some variants in production, one fitting both dna40 and 200 and others, sole 200 and sole 40, even the contractors factory burnt to the ground and then nothing at all for months, so for me anythings better than nothing,, but i do like my white one..... (""So much infact ive put blue plastic over it to keep it safe"":,,lmao) Link to comment Share on other sites More sharing options...
BillW50 Posted April 25, 2016 Report Share Posted April 25, 2016 My two HCigar VT133 have white screens and my two Reuleaux DNA200 have blue screens. The blue screens seems brighter. I have the charging screen on all of them set dimly. The blue ones are still viewable at 30% brightness, while the white ones needs 40% to be viewable. Link to comment Share on other sites More sharing options...
dylang919 Posted September 29, 2016 Report Share Posted September 29, 2016 Just got my first blue hue screen with the Therion 133 that just came in today. It's not super blue or anything, but compared to my other 15 DNA screens there's definitely a difference. Personally, it looks kinda kool. Link to comment Share on other sites More sharing options...
Catharsis70 Posted April 15, 2017 Report Share Posted April 15, 2017 bringin this one back. i have two Hcigar vt250's ones screen is crisp white one has a blue/green tint. bought from different vendors months apart. how do you get a white lit screen for sure? i like the crisp white enough to replace the other screen. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now