JLIT Posted October 24, 2016 Report Posted October 24, 2016 dylang919 said: Very nice bro!!! Beautiful mod!!Appreciate it. Feels like I've aged twice as fast during this whole project but the end result will be worth it. Been using my REV1 over a year with no issues and even drove a 2 ton truck over it for a stress test lol... Have since gone and rough sanded up to 1000 grit from 400 due to the pavement scratches but it took the beating like a champ. Obvious major changes since this rev1 (delrin buttons, soft tact fire switch only being used internally now with external flush actuator, and the logo, and of course the minor change in plating Sa
2legsshrt Posted October 24, 2016 Report Posted October 24, 2016 How do they get 250w out of 2 18650's somekind of magic spell.
retird Posted October 24, 2016 Report Posted October 24, 2016 2legsshrt said:How do they get 250w out of 2 18650's somekind of magic spell.A DNA250 using just 2 cells just gives you a 167 watt device using the DNA250 board.
2legsshrt Posted October 24, 2016 Report Posted October 24, 2016 Gotcha make more sense. How is it compared to the 200?
VapingBad Posted October 24, 2016 Report Posted October 24, 2016 The 200 in 2 cell mode is 133 Watt, two thirds of the 3 cell max power.
2legsshrt Posted October 25, 2016 Report Posted October 25, 2016 I mean do you think the board is going to stand up like the 200.
Spygoat Vapes Posted October 25, 2016 Report Posted October 25, 2016 dylang919 said: How did you get this mod ordered? I went to sp customs website and the only mods he had on there to order were unregulated box mods. I ordered a sx 350j v2 box from him about 6 months ago and it turned out great. It's still in my rotation. The website doesn't have anything to pick from anymore. Let me know how you ordered if you don't mind and have the time. Thank You.I know Thomas at S&P. This was their first DNA250. Shoot him an email.
Spygoat Vapes Posted October 26, 2016 Report Posted October 26, 2016 dylang919 said: How did you get this mod ordered? I went to sp customs website and the only mods he had on there to order were unregulated box mods. I ordered a sx 350j v2 box from him about 6 months ago and it turned out great. It's still in my rotation. The website doesn't have anything to pick from anymore. Let me know how you ordered if you don't mind and have the time. Thank You.I just spoke to Thomas from S&P, he said to contact him on Facebook and he'll respond. He had to take the DNA250 off his site because he had an issue with someone ordering them via fraudulent cards.
Spygoat Vapes Posted October 27, 2016 Report Posted October 27, 2016 and another DNA250 added to the stable. This time it is another Boxer DNA250. I like it!
dylang919 Posted November 7, 2016 Report Posted November 7, 2016 Spygoat Vapes said:I just spoke to Thomas from S&P, he said to contact him on Facebook and he'll respond. He had to take the DNA250 off his site because he had an issue with someone ordering them via fraudulent cards. Thanks brother. What size box is that? B box? He should be able to get a max amps 2800 in that box size for sure if it's a B enclosure.
Vapin_nomad Posted November 8, 2016 Report Posted November 8, 2016 Boss 3000 v2 DNA 250 This mod is quality. The DNA chip, with the 2a Charging is awesome.
dylang919 Posted November 9, 2016 Report Posted November 9, 2016 Vapin_nomad said:Boss 3000 v2 DNA 250 This mod is quality. The DNA chip, with the 2a Charging is awesome. Nice mod. I posted my BOSS too . Love all 3 of my BOSS mods.
dylang919 Posted November 9, 2016 Report Posted November 9, 2016 I still really like my reuleaux DNA 200 . could I send it to Evolv, purchase a 250, and have them install it for me?
retird Posted November 9, 2016 Report Posted November 9, 2016 dylang919 said:I still really like my reuleaux DNA 200 . could I send it to Evolv, purchase a 250, and have them install it for me?Don't believe they offer that type of service. There are a lot of "modders" around that may be able to help ya out....it will take more work than just changing the board...
dylang919 Posted November 10, 2016 Report Posted November 10, 2016 retird said:Don't believe they offer that type of service. There are a lot of "modders" around that may be able to help ya out....it will take more work than just changing the board... Like what? Evolv made it sound like you could just remove one and install the other.
retird Posted November 10, 2016 Report Posted November 10, 2016 dylang919 said: Like what? Evolv made it sound like you could just remove one and install the other.Wiring:http://allaboute-cigarettes.proboards.com/thread/59815/wismec-reuleaux-dna200-stripSimilar device (rx200):https://www.youtube.com/watch?v=DasAxwurbJk
dylang919 Posted November 11, 2016 Report Posted November 11, 2016 retird said:Wiring:http://allaboute-cigarettes.proboards.com/thread/59815/wismec-reuleaux-dna200-stripSimilar device (rx200):https://www.youtube.com/watch?v=DasAxwurbJk Yeah, too much work. Lol. Wish wismec would release a DNA 250.
Spector NS5 RD Posted November 12, 2016 Report Posted November 12, 2016 dylang919 said:I still really like my reuleaux DNA 200 . could I send it to Evolv, purchase a 250, and have them install it for me?do you have the reuleaux with the DNA 200 or the cheaper rx 200? If you have the reuleaux with the DNA 200 board, the DNA 250 would be a simple drop in, transplant. The 200 and the 250 have the same dimensions and wiring hookup. Rx not so easy.
dylang919 Posted November 13, 2016 Report Posted November 13, 2016 ChunkyButt200 said:do you have the reuleaux with the DNA 200 or the cheaper rx 200? If you have the reuleaux with the DNA 200 board, the DNA 250 would be a simple drop in, transplant. The 200 and the 250 have the same dimensions and wiring hookup. Rx not so easy. I have the DNA 200.
Modbustersecig Posted November 13, 2016 Report Posted November 13, 2016 DNA 250 installed in the Opus wonderful .Match up and the design of the box and mounting of the board makes for excellent heat dissipation comes in handy 2 amp charging that board.putts out.No need to worry about toting a huge mod around with the charging time it's fast .
Iraqvet47 Posted November 15, 2016 Report Posted November 15, 2016 Lost Vapes Tirade DNA 200 conversion to DNA 250 upgrade 510 wire to 14ga. Paint flaked after 2nd week so shined mod to mirror finish. carbon fiber wrapped.
dylang919 Posted November 15, 2016 Report Posted November 15, 2016 Modbustersecig said:DNA 250 installed in the Opus wonderful .Match up and the design of the box and mounting of the board makes for excellent heat dissipation comes in handy 2 amp charging that board.putts out.No need to worry about toting a huge mod around with the charging time it's fast . Love the Opus!! Its a shame that Roger closed up shop. Want to make my Opus 200 a 250 now.
Modbustersecig Posted November 18, 2016 Report Posted November 18, 2016 dylang919 said: Love the Opus!! Its a shame that Roger closed up shop. Want to make my Opus 200 a 250 now. The box is awesome here's a picture of the opus I got a few of these boxes if anyone's looking and they are an awesome mod DNA 250 works great in the opus box
Modbustersecig Posted November 18, 2016 Report Posted November 18, 2016 dylang919 said: Love the Opus!! Its a shame that Roger closed up shop. Want to make my Opus 200 a 250 now. yes but I have a few hundred available
dylang919 Posted November 19, 2016 Report Posted November 19, 2016 Modbustersecig said: yes but I have a few hundred available How much? Areally they already converted to 250's, or just 200's?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now