gwyar

Members
  • Content Count

    145
  • Joined

  • Last visited

  • Days Won

    18

Files posted by gwyar

  1. my enhanced themes with K.I.S.S.-Mode

    - deutsch und englisch umschaltbar in einer Bedienoberfläche
    =================================================
    HERE ARE THE CURRENT VERSIONS:
    EVOLV - enhanced theme with elementary mode - Evolv
    SQUAPE - enhanced theme with elementary mode - Squape
    STATTQUALM - enhanced theme with elementary mode - StattQualm
    SILVER - enhanced theme with elementary mode - EVOLV+LVE+Squape in one theme selectable
    =================================================
    - silver and  black versions are also available!
    - too many details to list them; You will discover them in daily use and you will love them ...
    The following logo combinations are available:
    - BLACK: Evolv_or_SQ_switchable
    - SILVER: Evolv or LVE_switchable
    - SCARLET PASSION: Evolv_or_LVE_switchable
    Thanks to Tortuga for the fantastic background graphics!
    The "K.I.S.S.-Mode ON" mode addresses inexperienced users and is very simple,
    the "K.I.S.S.-Mode OFF" mode is aimed at experienced users who want full control over their mod ...
     
    (some screens may have changed)

    wolke-101 hat hier einen sehr anschaulichen Beitrag zu den Unzulänglichkeiten des TC-Modus geschrieben - spannend.



    PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!
    It works of course - but not in the sense of the developer ... 
    The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.
    BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
    Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
    Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.

    4,120 downloads

       (1 review)

    38 comments

    Updated

  2. my basic themes for dna75c / 250c - just for vaping

    Unfortunately, the preview is not complete - look at my own screenshots!



    I have reduced the functions to the absolute minimum; no clock, no date, no nothing ...
    The navigation is simple - screen exit down round robin and exit up to lock the device.
    The result: no shuffling through menus and submenus - just vaping and everything you need is on exactly one screen!

    PLEASE NOTE:
    The change of wire type must still be completed by pressing the firebutton, since the wire is tested internally
    - The gradation of the power setting is of course adapted to the performance
    - all protections against erroneous settings (eg Temp-Protect in power mode), as usual from my enhanced themes


    -the functions for REPLAY are only enabled in power mode (as provided by Evolv) and only after activation if the coil is REPLAY-capable.

    - if replay is activated, the specific functions are only displayed, if the coil is replayable

    In addition to the battery indicator in the upper area of the screen, the entire display is framed by a charge level indicator.
    If the battery level is less or equal to 5%, a clear warning appears.

    ______________________________________________________________________________
    TO THE EXPERIENCED USERS:

    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.
    ______________________________________________________________
    Disclaimer:
    I have permission from the companies "StattQualm" and "Vapor Giant" to use their protected logos for private use.
    I expressly point out that any commercial use, including the distribution of my themes with upstream advertising banners, is prohibited.
    Haftungsausschluss:
    Mir liegt die Erlaubnis der Firmen "StattQualm" und "Vapor Giant" zur Verwendung ihrer geschützten Logos für den privaten Gebrauch vor. 
    Ich weise ausdrücklich darauf hin, dass jegliche kommerzielle Nutzung, dazu zählt auch die Verbreitung meiner Themes mit vorgeschalteten Werbebannern, untersagt ist. 

    871 downloads

       (1 review)

    7 comments

    Updated

  3. LCARS - basic theme

    Unfortunately, the preview is not complete - look at my own screenshot!

    I have reduced the functions to the absolute minimum; no clock, no date, no nothing ...
    The navigation is simple - screen exit down round robin and exit up to lock the device.
    The result: no shuffling through menus and submenus - just vaping and everything you need is on exactly one screen!
    The following screenshots are from my basic themes for dna75c / 250c - just for vaping V3.1; are however fully implemented in a customized design:

    PLEASE NOTE:
    The change of wire type must still be completed by pressing the firebutton, since the wire is tested internally
    - The gradation of the power setting is of course adapted to the performance
    - all protections against erroneous settings (eg Temp-Protect in power mode), as usual from my enhanced themes


    -the functions for REPLAY are only enabled in power mode (as provided by Evolv) and only after activation if the coil is REPLAY-capable.

    - if replay is activated, the specific functions are only displayed, if the coil is replayable

    ______________________________________________________________________________
    TO THE EXPERIENCED USERS:

    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.

    56 downloads

       (0 reviews)

    0 comments

    Updated

  4. Star Trek Theme 2020

    This is a theme from the user "Astromike", 
    he uploaded it on July 7th, 2017 and wrote the following:
    "Just got my Therion today and figured I'd try out the custom theme thing. 
    Here's a Star Trek theme, complete with the LCARS UI. 
    Note this isn't the first 75C Star Trek theme (and it probably won't be the last).
    Feedback welcome. "
    This comment follows on April 30, 2018:
    "PLEASE make it compatible with 250C !! Beautiful theme!"
    I came across this beautiful topic and thought to myself - it is about time!
    Here is the (almost) original design expanded to include the replay function.

    I also used a new toggle design here:

    If there are problems with the font used, it may be due to the fact that you certainly do not have it on your pc. Therefore the download link can be found here:
    https://gtjlcars.de/LCARSindex/LCARSFONTS.htm
    Direct download LCARS GT3J.ttf
    If there are problems installing the font on Windows 10 -
    adding-new-fonts-to-theme-designer (Thanks to user Formula 1)
    You can find a useful LCARS color table here:
    http://www.treksinscifi.com/trekdaily/?p=823

    124 downloads

       (1 review)

    0 comments

    Updated

  5. enhanced theme with elementary mode - Evolv

    - German and English switchable in one user interface
    - Deutsch und Englisch in einer Benutzeroberfläche umschaltbar

    PLEASE NOTE: ACTIVATING AND DEACTIVATING THE OPERATING MODES "TC" AND "REPLAY" REQUIRES A SHORT FIRE FOR CONFIRMATION - THIS IS THE FIRMWARE'S DEBT
    - The menu navigation distinguishes between 250c and 75c chipsets
    (Power Bank support)
    - With the 250c chipset, up to 4 battery cells are read out individually
    (with 4 cells the total voltage is not displayed)
    - Various functions protect against accidental TC operation in Powermode
    - the REPLAY function is only enabled in power mode
    (as provided by Evolv) and only if the coil is suitable
    - die Menüführung unterscheidet zwischen 250c- und 75c-Chipsatz 
    (Powerbankunterstützung)
    - beim 250c-Chipsatz werden bis zu 4 Akkuzellen einzeln ausgelesen 
    (bei 4 Zellen entfällt die Anzeige der Gesamtspannung)
    - verschiedene Funktionen schützen vor versehentlichem TC-Betrieb im Power-Modus 
    - die REPLAY-Funktion wird nur im Power-Modus freigegeben 
    (wie von Evolv vorgesehen) und nur wenn die Coil geeignet ist

    PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!
    It works of course - but not in the sense of the developer ... 
    The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.
    BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
    Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
    Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.
     
    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to optionally display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.
    In the following standard topics, I have added a screen on which these dependencies can be observed well    PreHeat-Boost-Test.ecigtheme
    Tja, die Anzeige der Preheat-Temperatur ist ja recht interessant, aber dies direkt einzustellen scheint sinnlos, da der Chipsatz in festen Schritten arbeitet. 
    Soweit ich das Verhalten richtig deute, sind diese Schritte von der eingestellten Zieltemperatur abhängig, ebenso ist das Überschreiten der TC-Zieltemperatur im Preheat nicht möglich - selbst wenn die direkte Temperatureingabe etwas anderes suggeriert. Es existiert eine direkte Abhängigkeit zwischen Preheat-Temp und Preheat-Punch. 
    Ich habe mich daher dazu entschieden, zwar wahlweise die (vom Chipsatz zugeordnete) Preheat-Temperatur anzuzeigen - die Einstellung geschieht jedoch als Preheat-Punch.
    Sollte mir jemand für mich verständlich darlegen, dass meine Ausführungen falsch sind, gehe ich diesen Schritt natürlich zurück.
    Im folgenden Standardtheme habe ich einen Bildschirm hinzugefügt, auf welchem siche diese Abhängikeiten gut beobachten lassen PreHeat-Boost-Test.ecigtheme

    377 downloads

       (0 reviews)

    0 comments

    Updated

  6. enhanced theme with elementary mode - StattQualm

    - old school design for older devices; looks great e.g. with a dark Therion ... with a golden DotMod ....
    - old school-design für ältere Geräte; sieht großartig aus z.B. bei einem dunklen Therion... mit einem goldenen DotMod....
    - German and English switchable in one user interface
    - Deutsch und Englisch in einer Benutzeroberfläche umschaltbar

    PLEASE NOTE: ACTIVATING AND DEACTIVATING THE OPERATING MODES "TC" AND "REPLAY" REQUIRES A SHORT FIRE FOR CONFIRMATION - THIS IS THE FIRMWARE'S DEBT
    - The menu navigation distinguishes between 250c and 75c chipsets
    (Power Bank support)
    - With the 250c chipset, up to 4 battery cells are read out individually
    (with 4 cells the total voltage is not displayed)
    - Various functions protect against accidental TC operation in Powermode
    - the REPLAY function is only enabled in power mode
    (as provided by Evolv) and only if the coil is suitable
    - die Menüführung unterscheidet zwischen 250c- und 75c-Chipsatz 
    (Powerbankunterstützung)
    - beim 250c-Chipsatz werden bis zu 4 Akkuzellen einzeln ausgelesen 
    (bei 4 Zellen entfällt die Anzeige der Gesamtspannung)
    - verschiedene Funktionen schützen vor versehentlichem TC-Betrieb im Power-Modus 
    - die REPLAY-Funktion wird nur im Power-Modus freigegeben 
    (wie von Evolv vorgesehen) und nur wenn die Coil geeignet ist

    PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!
    It works of course - but not in the sense of the developer ... 
    The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.
    BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
    Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
    Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.
     
    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to optionally display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.
    In the following standard topics, I have added a screen on which these dependencies can be observed well    PreHeat-Boost-Test.ecigtheme
    Tja, die Anzeige der Preheat-Temperatur ist ja recht interessant, aber dies direkt einzustellen scheint sinnlos, da der Chipsatz in festen Schritten arbeitet. 
    Soweit ich das Verhalten richtig deute, sind diese Schritte von der eingestellten Zieltemperatur abhängig, ebenso ist das Überschreiten der TC-Zieltemperatur im Preheat nicht möglich - selbst wenn die direkte Temperatureingabe etwas anderes suggeriert. Es existiert eine direkte Abhängigkeit zwischen Preheat-Temp und Preheat-Punch. 
    Ich habe mich daher dazu entschieden, zwar wahlweise die (vom Chipsatz zugeordnete) Preheat-Temperatur anzuzeigen - die Einstellung geschieht jedoch als Preheat-Punch.
    Sollte mir jemand für mich verständlich darlegen, dass meine Ausführungen falsch sind, gehe ich diesen Schritt natürlich zurück.
    Im folgenden Standardtheme habe ich einen Bildschirm hinzugefügt, auf welchem siche diese Abhängikeiten gut beobachten lassen PreHeat-Boost-Test.ecigtheme

    74 downloads

       (0 reviews)

    0 comments

    Updated

  7. enhanced theme with elementary mode - Squape

    - German and English switchable in one user interface
    - Deutsch und Englisch in einer Benutzeroberfläche umschaltbar

    PLEASE NOTE: ACTIVATING AND DEACTIVATING THE OPERATING MODES "TC" AND "REPLAY" REQUIRES A SHORT FIRE FOR CONFIRMATION - THIS IS THE FIRMWARE'S DEBT
    - The menu navigation distinguishes between 250c and 75c chipsets
    (Power Bank support)
    - With the 250c chipset, up to 4 battery cells are read out individually
    (with 4 cells the total voltage is not displayed)
    - Various functions protect against accidental TC operation in Powermode
    - the REPLAY function is only enabled in power mode
    (as provided by Evolv) and only if the coil is suitable
    - die Menüführung unterscheidet zwischen 250c- und 75c-Chipsatz 
    (Powerbankunterstützung)
    - beim 250c-Chipsatz werden bis zu 4 Akkuzellen einzeln ausgelesen 
    (bei 4 Zellen entfällt die Anzeige der Gesamtspannung)
    - verschiedene Funktionen schützen vor versehentlichem TC-Betrieb im Power-Modus 
    - die REPLAY-Funktion wird nur im Power-Modus freigegeben 
    (wie von Evolv vorgesehen) und nur wenn die Coil geeignet ist

    PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!
    It works of course - but not in the sense of the developer ... 
    The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.
    BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
    Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
    Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.
     
    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to optionally display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.
    In the following standard topics, I have added a screen on which these dependencies can be observed well    PreHeat-Boost-Test.ecigtheme
    Tja, die Anzeige der Preheat-Temperatur ist ja recht interessant, aber dies direkt einzustellen scheint sinnlos, da der Chipsatz in festen Schritten arbeitet. 
    Soweit ich das Verhalten richtig deute, sind diese Schritte von der eingestellten Zieltemperatur abhängig, ebenso ist das Überschreiten der TC-Zieltemperatur im Preheat nicht möglich - selbst wenn die direkte Temperatureingabe etwas anderes suggeriert. Es existiert eine direkte Abhängigkeit zwischen Preheat-Temp und Preheat-Punch. 
    Ich habe mich daher dazu entschieden, zwar wahlweise die (vom Chipsatz zugeordnete) Preheat-Temperatur anzuzeigen - die Einstellung geschieht jedoch als Preheat-Punch.
    Sollte mir jemand für mich verständlich darlegen, dass meine Ausführungen falsch sind, gehe ich diesen Schritt natürlich zurück.
    Im folgenden Standardtheme habe ich einen Bildschirm hinzugefügt, auf welchem siche diese Abhängikeiten gut beobachten lassen PreHeat-Boost-Test.ecigtheme

    112 downloads

       (0 reviews)

    0 comments

    Updated

  8. enhanced theme with elementary mode - EVOLV+LVE+Squape in one theme selectable

    Now you can switch between 3 logos; the "EVOLV" logo activated by default, or alternatively the "LVE" or the "StattQualm" logo
    - German and English can also be switched in one user interface
    Nun könnt Ihr zwischen 3 Logos wechseln; dem standartmäßig aktivierten "EVOLV"-Logo, oder alternativ dem "LVE"- oder dem "StattQualm"-Logo
    - Deutsch und Englisch ebenfalls in einer Benutzeroberfläche umschaltbar

    - The menu navigation distinguishes between 250c and 75c chipsets
    (Power Bank support)
    - With the 250c chipset, up to 4 battery cells are read out individually
    (with 4 cells the total voltage is not displayed)
    - Various functions protect against accidental TC operation in Powermode
    - the REPLAY function is only enabled in power mode
    (as provided by Evolv) and only if the coil is suitable
    - die Menüführung unterscheidet zwischen 250c- und 75c-Chipsatz 
    (Powerbankunterstützung)
    - beim 250c-Chipsatz werden bis zu 4 Akkuzellen einzeln ausgelesen 
    (bei 4 Zellen entfällt die Anzeige der Gesamtspannung)
    - verschiedene Funktionen schützen vor versehentlichem TC-Betrieb im Power-Modus 
    - die REPLAY-Funktion wird nur im Power-Modus freigegeben 
    (wie von Evolv vorgesehen) und nur wenn die Coil geeignet ist

    PLEASE NOTE - REPLAY IS FOR COIL MATERIAL "Watts" PROVIDED, NOT FOR SPECIFIC WIRES!
    It works of course - but not in the sense of the developer ... 
    The functions for REPLAY are only enabled after activation if the coil is REPLAY-capable.
    BITTE BEACHTEN - REPLAY IST FÜR COIL-MATERIAL "Watts" VORGESEHEN, NICHT FÜR SPEZIFISCHE DRÄHTE! 
    Es funktioniert natürlich - ist aber nicht im Sinne der Entwickler... 
    Die Funktionen für REPLAY werden nach Aktivieren nur freigegeben, wenn die Wicklung REPLAY-fähig ist.
     
    Well, the display of the Preheat temperature is quite interesting, but to set this directly seems pointless, since the chipset works in fixed increments.
    As far as I interpret the behavior correctly, these steps are dependent on the set target temperature, as well as the exceeding of the TC target temperature in Preheat is not possible - even if the direct temperature input suggests something else. There is a direct dependency between Preheat-Temp and Preheat-Punch.
    So I decided to optionally display the preheat temperature (assigned by the chipset) - but the setting is done as a preheat punch.
    Should someone explain to me in an understandable way that my explanations are wrong, I will go back this step, of course.
    In the following standard topics, I have added a screen on which these dependencies can be observed well    PreHeat-Boost-Test.ecigtheme
    Tja, die Anzeige der Preheat-Temperatur ist ja recht interessant, aber dies direkt einzustellen scheint sinnlos, da der Chipsatz in festen Schritten arbeitet. 
    Soweit ich das Verhalten richtig deute, sind diese Schritte von der eingestellten Zieltemperatur abhängig, ebenso ist das Überschreiten der TC-Zieltemperatur im Preheat nicht möglich - selbst wenn die direkte Temperatureingabe etwas anderes suggeriert. Es existiert eine direkte Abhängigkeit zwischen Preheat-Temp und Preheat-Punch. 
    Ich habe mich daher dazu entschieden, zwar wahlweise die (vom Chipsatz zugeordnete) Preheat-Temperatur anzuzeigen - die Einstellung geschieht jedoch als Preheat-Punch.
    Sollte mir jemand für mich verständlich darlegen, dass meine Ausführungen falsch sind, gehe ich diesen Schritt natürlich zurück.
    Im folgenden Standardtheme habe ich einen Bildschirm hinzugefügt, auf welchem siche diese Abhängikeiten gut beobachten lassen PreHeat-Boost-Test.ecigtheme

    231 downloads

       (0 reviews)

    0 comments

    Updated

  9. - Evolv Default Enhanced 250C Theme 3.5 -

    Based on the "Evolv Default Enhanced 250C Theme 3.5" from JMat76, I created this SILVER version.
    In addition to a few small graphics changes, I have modified the lockscreen and mainscreen - but it can be switched to the original look.

    In the following I quote directly the theme description from the author JMat76:
    - Several modifications keeping the overall default Evolv theme look.
     -Main screen "Firing" now red when firing as well as all menu or status bars.
    - On main screen when not in active Replay saved puff you can select the ohm reading to shortcut you to the Coil Info screen.
    - Settings changed to Menu for new menu / settings platform
    - Most "Back" buttons removed and scroll up of down off the screen to go to the previous screen.
    - Watts now adjustable in 1 watt increments instead of .1.
    - Temp adjustable in 5 degree increments.
    - New menu platform dived into Profile, Puff Info, Coil Info and Settings on main menu.
    - New coil install screen now has cold ohm temp for new coil and old coil resistance and temp when deciding on new coil or keeping old settings.
    - Profile Menu has added cold ohm temp with current ohm reading and coil material setting added. Also added is the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active.
    - Puff Info screen enhanced with chart and ability to change wattage and or temp for dialing in a perfect puff. Also the addition of several live readings of the last puff. Live ohms, room temp,average power, puff duration, puff volts, puff amps, and average puff temp, and max puff temp when in temp control. When a non-temp sensing coil is installed gives you current battery % instead of temp.
    - Recording Screen with new additions to be able to monitor with every puff.
    - New Coil Info screen added with current profile, coil material, cold ohms, live ohms, coil temp, ability to remeasure resistance, and ability to lock ohms.
    - New settings menu with System, Display, Device, and About.
    - System gives you date, time, 12 / 24 hr, F or C temp, max puff time and serial number.
    - New Display menu has brightness adjustment, always on, stealth level, auto lock, auto lock time out, and # of clicks to lock, and ability to set unlock device sequence.
    - Device screen now has power bank settings, and battery voltages for up to 4 batteries.
    - About Menu with Lifetime puff count, current firmware, current revision, edition, puff count total energy, and reset to take you to a rest statistics screen.
    Also take a look at my own Themes, 
    especially my enhaced themes with K.I.S.S.- Mode!

    459 downloads

       (0 reviews)

    0 comments

    Updated