Jump to content

2 Screenshots

About This File

Supports DNA250c and DNA75c, and Replay on both of those chips. Now you can choose from two different UI from the settings page. 

You need the latest international firmware 1.1 SP33.2 INT (included with EScribe Suite 2.0 SP15) on your DNA75c for it to work.

2.1.0.thumb.jpg.356276483e0d2b2e295c0597549699da.jpg

Note:

The status messages, like temp protected or atomizer short etc. are only displayed when firing.  

Press the fire button to exit the menu or any other page that doesn't have a back button.

I hope you guys like it!

2.0.0-new.thumb.jpg.b35f30eabdcda5ce1e278167445c6e09.jpg

2.1.0-ref.thumb.jpg.ae42c44a382cf68bae6c62f8c4450172.jpg

Also check out my other themes: 

Material FireMaterial Ocean


What's New in Version 2.2.0   See changelog

Released

  • You can use replay now with any coil material.

What's New in Version 2.1.0

  • Enable/Disable replay from the Atomizer Profile screen. Forgot this one from my to-do list.

Major version 2.0.0 - Everyone should update!

There has been a lot of new development in the recent weeks. This is a major update and everyone should update, especially anyone running 1.5.0 or lower. 

  • The theme incorporated two main screen UI since 1.6.0. Material UI has been made the default UI, and the old UI is now called Classic UI. You can enable Classic UI from the settings.
  • Lock screen now shows the charging/power bank current when plugged in. There is also a new gauge when using the mod as a power bank.
  • Atomizer Profile and New Atomizer Detect screens have been majorly overhauled. You can fire from the Atomizer Profile screen again.
  • Atomizer Profile screen now lets you adjust the Pre-heat power.
  • On the Atomizer Profile screen you can adjust the Pre-heat temperature either via a Punch gauge or via a Temperature field. You can switch between them with the new toggle. For more information see the UI reference picture below.
  • Atomizer lock feature is now available in all types of profiles. Previously it was only available in TC profiles. This decision was made because EScribe lets you lock resistance in any profile, and sometimes it's necessary to lock the resistance in mods with a spotty 510 connection.
  • Bugfix: Mystery click from "coil power" to "cancel replay" while replaying has been eliminated.
  • Various other tweaks throughout the theme.

What's New in Version 1.6.1

  • USB connection status added to lock screen. Thanks @retird

What's New in Version 1.6.0

  • Gauges now has two different UI for the main page. I've incorporated elements from the Material-ish themes on to the Gauges theme. Thanks @BlindBuck for the idea! 
    You can enable the Material-ish UI elements by going to System > Settings and enabling "Material-ish"
  • Minor refinements of the various gauges and variables on the main page. 

What's New in Version 1.5.0

DNA75c now supports replay!

DNA75c now supports replay with the new international firmware 1.1 SP33.2 INT. As such I no longer need to maintain two separate versions of the theme. You can flash the same Gauges 1.5.0 theme file on both DNA250c and DNA75c.

You have to have 1.1 SP33.2 INT firmware flashed on your DNA75c device for this theme to work.

  • Made a few compatibility related tweaks.  
  • Like 13
  • Thanks 25

User Feedback

Recommended Comments



Pushed an update to support Replay mode in DNA250c. 

I don't have a DNA250c device so I didn't get to test it. Please let me know if you find a bug or if something wasn't done right. 

Does anyone know how I can edit the automated screenshots generated upon uploading a theme here? Right now the thumbnail shows replay mode, I'd rather it show the wattage mode like before.

Edited by SirTimmyTimbit
Link to comment
Share on other sites

Awesome thank you very much @Mjag!

Everyone please make sure to download DNA75c-Gauges-1.2.4.ecigtheme if you have a DNA75c mod, or DNA250c-Gauges-1.2.4.ecigtheme if you have a DNA250c version.

Turns out you can't install a DNA250c theme on a DNA75c mod.

Edited by SirTimmyTimbit
Link to comment
Share on other sites

The last update for DNA75c is 1.2.3. The last update for DNA250c is 1.3.0

Version numbers are a little messed up right now. I'll reset them in the next update and update them separately.

Link to comment
Share on other sites

Hi Tim.  Fantastic theme.  Just started using it and love it.  One thing,  I cannot lock the device.  All settings seem fine, but 5x click does not lock it.

250c by the way :-)

Edited by Yorkyboy
  • Like 1
Link to comment
Share on other sites

On the atomizer screen under SS316  I do not see preheat and punch. I see the circle to activate preheat but no text. For punch I see nothing. Is their something I need to do to make these features appear?  This is on a DNA75C with theme version 1.2.3

Link to comment
Share on other sites

vor 8 Stunden schrieb Yorkyboy:

Hi Tim.  Fantastic theme.  Just started using it and love it.  One thing,  I cannot lock the device.  All settings seem fine, but 5x click does not lock it.

250c by the way :-)

Agreed, 5 clicks do nothing at the moment. I have to click about 10 times to lock the device.

Just a minor inconvenience that is probably easy to fix. Apart from that it is a great theme.

  • Like 1
Link to comment
Share on other sites

54 minutes ago, kai0303 said:

Agreed, 5 clicks do nothing at the moment. I have to click about 10 times to lock the device.

Just a minor inconvenience that is probably easy to fix. Apart from that it is a great theme.

Thanks for that.  Just tried and it does lock after a while.  Will do me for now until it's fixed.  I can live with that.

  • Like 1
Link to comment
Share on other sites

On 4/10/2018 at 9:09 AM, Yorkyboy said:

Hi Tim.  Fantastic theme.  Just started using it and love it.  One thing,  I cannot lock the device.  All settings seem fine, but 5x click does not lock it.

250c by the way :-)

 

19 hours ago, kai0303 said:

Agreed, 5 clicks do nothing at the moment. I have to click about 10 times to lock the device.

Just a minor inconvenience that is probably easy to fix. Apart from that it is a great theme.

 

16 hours ago, Yorkyboy said:

Just been playing and if you reduce the clicks in the lock screen menu to 3 it locks in 5/6 clicks :DD

That is very strange. Can you check to see if it happens on the main screen as well as a non firing screen like "Sys Status"?

I can't see how a theme would be able to affect the lock system. I don't have a 250c to test it unfortunately.

I'll keep looking into it. Just pushed an update (1.3.1) that fixes a few minor things. See if that helps?

Thanks for letting me know guys!

Edited by SirTimmyTimbit
Link to comment
Share on other sites

20 hours ago, Mmartini said:

On the atomizer screen under SS316  I do not see preheat and punch. I see the circle to activate preheat but no text. For punch I see nothing. Is their something I need to do to make these features appear?  This is on a DNA75C with theme version 1.2.3

I don't have that problem, and I haven't heard anyone else mention that either. Are you sure the profile is set up correctly? 

I just pushed an update (1.3.1) see if that solves it. The atomizer screen had an unused control in the staging area which I deleted in this update. I'm sorry it's glitching on you, thanks for letting me know!

Edited by SirTimmyTimbit
Link to comment
Share on other sites

vor einer Stunde schrieb SirTimmyTimbit:

 

 

That is very strange. Can you check to see if it happens on the main screen as well as a non firing screen like "Sys Status"?

I can't see how a theme would be able to affect the lock system. I don't have a 250c to test it unfortunately.

I'll keep looking into it. Just pushed an update (1.3.1) that fixes a few minor things. See if that helps?

Thanks for letting me know guys!

Hi Timmy,

first I'd like to thank you for all the work you've put in this fabulous theme and for updating it so fast.

I'm now on v1.3.1, but the problem persists unfortunately. And yes, it seems to happen only on the main screen, when I try being in "Sys Status" the device get's locked as intended (3-5 clicks). I'm new to DNA (two days, to be exact - long time Yihi user here), so I don't have very good knowledge in Theme Designer or Escribe to be of more help. Sorry for that.

But as said before, this is just a little inconvenience someone get's used to. :)

  • Like 1
Link to comment
Share on other sites

5 hours ago, SirTimmyTimbit said:

I don't have that problem, and I haven't heard anyone else mention that either. Are you sure the profile is set up correctly? 

I just pushed an update (1.3.1) see if that solves it. The atomizer screen had an unused control in the staging area which I deleted in this update. I'm sorry it's glitching on you, thanks for letting me know!

Yup it is working now! Awesome thank you!

  • Like 1
Link to comment
Share on other sites

15 hours ago, kai0303 said:

Hi Timmy,

first I'd like to thank you for all the work you've put in this fabulous theme and for updating it so fast.

I'm now on v1.3.1, but the problem persists unfortunately. And yes, it seems to happen only on the main screen, when I try being in "Sys Status" the device get's locked as intended (3-5 clicks). I'm new to DNA (two days, to be exact - long time Yihi user here), so I don't have very good knowledge in Theme Designer or Escribe to be of more help. Sorry for that.

But as said before, this is just a little inconvenience someone get's used to. :)

Thanks man means a lot. I appreciate you putting up with this glitch :)

It seems like the mod is firing instead of waiting to see if the button press is part of a sequence. I'm not sure what I can do to fix it but I'm definitely looking into it. 

I'm going to upload two new themes in a few hours. If you get a chance try them out. If the problems persist in those themes as well, and in no other DNA250 theme it'll be time for me to seek help from Evolv :awkward:

 

 

Edited by SirTimmyTimbit
  • Like 1
Link to comment
Share on other sites

Hi Tim.  Just tried uploading 1.4 onto the 250c and got an error (see attached).  The size of the preheat toggle on the Main Profile page was set to 15, 16 and the image is 15, 15.  I hope you don't mind, but I've changed it and attached the version with the correct size to match the image to save you a bit of time.
 

gauges.png

DNA250c-Gauges-1.4.0.ecigtheme

Edited by Yorkyboy
  • Thanks 1
Link to comment
Share on other sites

21 hours ago, Yorkyboy said:

Hi Tim.  Just tried uploading 1.4 onto the 250c and got an error (see attached).  The size of the preheat toggle on the Main Profile page was set to 15, 16 and the image is 15, 15.  I hope you don't mind, but I've changed it and attached the version with the correct size to match the image to save you a bit of time.
 

gauges.png

DNA250c-Gauges-1.4.0.ecigtheme

Thank you so much man! I didn't change the toggle in the 75c version so I didn't get that error. I really appreciate you letting me know and providing me with a fixed version :)

Link to comment
Share on other sites

I see it's been 7-8 d days since the last post about the locking issue. I have the same issue as well. I downloaded the  DNA250c-Gauges-1.4.1.ecigtheme  last night and have been trying to figure out the issue and I'm not smart enough to find it.

On the main screen, no matter what profile I'm running, I can't get the lock screen to happen with the default 5 clicks. I set it to 3 clicks in escribe and can get it to work with 6 clicks from the main screen.  But it'll unlock with 5.  I then go to the system screen from the main screen and get the same thing. 6 clicks to lock.   Though I have 7 DNA devises, they are all 200's and 250. My new mod is the  LostVape  Finder 250c. Seems to be a  different beast to tame.  Yes, all my profiles have support replay toggled but not puff saved, playing.  So does anyone know the fix? What could I have sat up or not set right to cause this?  I don't dabble in the theme designer yet as I have no clue about it yet. I did try on the default profile and messed something up so got this and just uploaded it to my mod and just set the basic parameters like profiles, battery atc.

  • Thanks 1
Link to comment
Share on other sites

@Yorkyboy @kai0303 @rask116

Hey guys I think the screen lock issue is now fixed. I just noticed it happening to my DNA75c recently. 

I think the problem was there were too many things on the main screen that were updating and toggling their visibility while firing. That caused a lag and I think that lag caused some of the clicks to not register.

I drastically cut that number down the number of fields that update while firing. The issue seems to be fixed on my DNA75c now. Please let me know if it's fixed for you in version 1.4.2

Thanks for all the feedback :)

  • Thanks 1
Link to comment
Share on other sites

by far the most beautiful themes over here. You did an amazing job dude. Keep it up! Looking forward for more themes, using Gauges Theme since i got my DNA 250C!

  • Like 1
Link to comment
Share on other sites

Just a perfect UI, love the way you set up Replay. BTW, Replay is the best thing Evolv has ever introduced, just great.

Kudos to you Tim for taking the time to develop and make such a great theme! :thumb:

  • Like 2
Link to comment
Share on other sites

Just wanted to say thank you for the hard work!  This theme and main screen GUI is fantastic, your other two are very nice as well.  

 

Quick question I am using replay and I see the hidden field in the Theme Designer.  Is there a way to replace the text with icons?

 

 

  • Thanks 1
Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...