neX Posted April 28, 2018 Report Posted April 28, 2018 Is it me or has the replay option "Allow on dubious coils" , under the mod tab been omitted on the 75C replay update ??
Smokin Dave Posted April 28, 2018 Report Posted April 28, 2018 I haven't been able to find it myself.Maybe it's for the 250c only.
Darxtorm Posted April 28, 2018 Report Posted April 28, 2018 I see the feature but it's not allowing me to "record" the box just stays blank. Is it because I'm using Ni80?
awsum140 Posted April 28, 2018 Report Posted April 28, 2018 Upload the default theme to the device after updating Escribe. Enable "Replay" in the profiles you want to use it in and upload those settings to the device.
Moutainvaper Posted April 28, 2018 Report Posted April 28, 2018 4 minutes ago, awsum140 said: Upload the default theme to the device after updating Escribe. Enable "Replay" in the profiles you want to use it in and upload those settings to the device. Just uploaded the default and it solved the issues listed above! Just make a "watts" profile, check the "use Replay on this profile" and you are off to the races!
Darxtorm Posted April 28, 2018 Report Posted April 28, 2018 47 minutes ago, Moutainvaper said: Just uploaded the default and it solved the issues listed above! Just make a "watts" profile, check the "use Replay on this profile" and you are off to the races! I did that. My problem is the replay button won't appear. It's just a blank box.
awsum140 Posted April 28, 2018 Report Posted April 28, 2018 Sounds like, possibly, a corrupt file. Maybe doing it all again will help. Personally, I'd get rid of any atomizer that had "questionable resistance".
crea Posted April 28, 2018 Report Posted April 28, 2018 Not working for me either,i have a Vapecige creator DNA75c,i did everything mentioned in the replay thread, download and updated Escribe with the service pack "SetupEScribe2_SP15_INTL_ServicePack" restored the default theme and checked the box about the Replay function under the profile 8 which was Watt i renamed it to Replay and uploaded the settings to the mod.I'm using a dual coil ni80 build,i can see the box but the replay function doesn't start.
Moutainvaper Posted April 28, 2018 Report Posted April 28, 2018 (edited) 23 minutes ago, crea said: Not working for me either,i have a Vapecige creator DNA75c,i did everything mentioned in the replay thread, download and updated Escribe with the service pack "SetupEScribe2_SP15_INTL_ServicePack" restored the default theme and checked the box about the Replay function under the profile 8 which was Watt i renamed it to Replay and uploaded the settings to the mod.I'm using a dual coil ni80 build,i can see the box but the replay function doesn't start. Sounds like it's setup fine, just need to use a SS or other temp sensing coil. Ni80 is gonna be pretty hit and miss, some may work...some not. Edited April 28, 2018 by Moutainvaper 1
crea Posted April 28, 2018 Report Posted April 28, 2018 (edited) 24 minuti fa, Moutainvaper ha scritto: Sounds like it's setup fine, just need to use a SS or other temp sensing coil. Ni80 is gonna be pretty hit and miss, some may work...some not. Not working also in SS nor premade sub-ohm tank coils SS or mesh coils Edited April 28, 2018 by crea
neX Posted April 28, 2018 Author Report Posted April 28, 2018 (edited) My question is not whether replay is working or not , its the option of using "dubious coils" or "unlikely" in escribe , i have it working on a single SS coils , but when I am using a dual coils rta ( fused SS Claptons ) its not , on my dna250C there are the options of "dubious coils" etc.. ? Edited April 28, 2018 by neX
James Posted April 28, 2018 Report Posted April 28, 2018 @neX, the 75C does not have the signal-to-noise ratio to make "Allow on dubious coils." reliable for most coils. The 250C has an extremely clean signal. (Among other reasons, voltage step-down-only (250C) has lower noise than step-up/step-down (75C). Reviewers etc. tend to treat step-up/step-down as a feature but it's really a tradeoff. One that makes sense for a single battery mod, but a tradeoff nonetheless.) For your Clapton coil, if it is a mix of Kanthal and Stainless, more Stainless should get you into a usable range. Also, some coils and some wire are marketed as Stainless when they are not. To objectively find out, check Device Monitor. How much does Live Ohms change during your puff with the dual coil? For a real Stainless coil, you should see about a 20% rise in Live Ohms from cold. Real Stainless coils should work with no problem at all. 2
Darxtorm Posted April 28, 2018 Report Posted April 28, 2018 1 hour ago, James said: @neX, the 75C does not have the signal-to-noise ratio to make "Allow on dubious coils." reliable for most coils. The 250C has an extremely clean signal. (Among other reasons, voltage step-down-only (250C) has lower noise than step-up/step-down (75C). Reviewers etc. tend to treat step-up/step-down as a feature but it's really a tradeoff. One that makes sense for a single battery mod, but a tradeoff nonetheless.) For your Clapton coil, if it is a mix of Kanthal and Stainless, more Stainless should get you into a usable range. Also, some coils and some wire are marketed as Stainless when they are not. To objectively find out, check Device Monitor. How much does Live Ohms change during your puff with the dual coil? For a real Stainless coil, you should see about a 20% rise in Live Ohms from cold. Real Stainless coils should work with no problem at all. So because my coil is Ni80 the replay button doesn't even show up?
crea Posted April 28, 2018 Report Posted April 28, 2018 i tried with plain ss316 wire and it's working now
jackobo Posted April 29, 2018 Report Posted April 29, 2018 (edited) same here, use ni80 fused clapton, cant get that replay feature working, theres only a blank field nothing in there. Edited April 29, 2018 by jackobo
crea Posted April 29, 2018 Report Posted April 29, 2018 (edited) Quote @jackobo, same here, use ni80 fused clapton, cant get that replay feature working, theres only a blank field nothing in there. try with plain wires,i had the same issue with ni80 and the wire was the problem,i was using a fused clapton of a well known brand but for some reason wasn't working. Edited April 29, 2018 by crea
VapingBad Posted April 29, 2018 Report Posted April 29, 2018 You need temp sensing wire like stainless steel, Ni, Ti or NiFe for replay to work, Nichrome (Ni80) and Kanthal are not going to work.
jackobo Posted April 29, 2018 Report Posted April 29, 2018 18 minutes ago, crea said: try with plain wires,i had the same issue with ni80 and the wire was the problem,i was using a fused clapton of a well known brand but for some reason wasn't working. No point trying with plain wires cos I never use them. Even if it works with plain wire, I never use micro coils so that this feature is useless for me on DNA 75c, ordered 250c, will see.
VapingBad Posted April 29, 2018 Report Posted April 29, 2018 Working great for me with duel triple twisted ss on the 75C and dual stapled ss claptons on the 250C, 400 W preheat really brings those big coils to life.
crea Posted April 29, 2018 Report Posted April 29, 2018 1 ora fa, jackobo ha scritto: No point trying with plain wires cos I never use them. Even if it works with plain wire, I never use micro coils so that this feature is useless for me on DNA 75c, ordered 250c, will see. Use ss316 exotic coils,mixed with supported metals as core should work fine. 1
Yas786 Posted April 29, 2018 Report Posted April 29, 2018 2 hours ago, jackobo said: No point trying with plain wires cos I never use them. Even if it works with plain wire, I never use micro coils so that this feature is useless for me on DNA 75c, ordered 250c, will see. Forgive me if I’m wrong here but what makes you think the 250c will do replay on the coils you are having issues with?? Ni80 and kanthal will not work with replay or tc mode. That’s just not limited to the dna75c board. You will have the same problems with a dna250c mod.
Wayneo Posted April 29, 2018 Report Posted April 29, 2018 1 hour ago, Yas786 said: Ni80 and kanthal will not work with replay or tc mode So long as the core wire(s) are a TC material, and N80 or Kanthal is used as a wrap, it's always worked for me in TC. When people talk 'plain' or 'simple', everyone's definition is/can be different, it's just too vague. I'd imagine, if anyone were to see ~20% rise in resistance in straight watts your chances are good. Where I imagine an issue is when they then use multi metal coils, like a clapton with a parallel wire or two ... all heating and cooling at different rates so the change is not consistent. I own NO color mods, so can't offer anything better.
jackobo Posted April 29, 2018 Report Posted April 29, 2018 2 hours ago, Yas786 said: Forgive me if I’m wrong here but what makes you think the 250c will do replay on the coils you are having issues with? yeah, you're right, my bad, got it now
Mr. Henke Posted April 29, 2018 Report Posted April 29, 2018 23 horas atrás, Smokin Dave disse: I haven't been able to find it myself.Maybe it's for the 250c only. Try to download a hidden Escribe.. :-)https://downloads.evolvapor.com/SetupEScribe2_SP15_INTL.exePut replay on SS
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now