multiple ui Gauges - Major update 2.0.0 2.2.0

@Vapin What kind of additional control and  TC specs would you like to see? If you click on the set temperature under the blue bar it'll let you adjust the temperature. If you click on atty it'll take you to the atomizer screen where you can change the power, temperature and pre-heat settings, as well as set or measure atomizer resistance. 

This theme is based on the default theme. The default theme had no option to lock resistance as far as I recall. It didn't cross my mind to put an option for it in there because I never use resistance lock in TC.

I'll put it on there if I can find the room for it, without making the theme too cluttered.

Thanks for your feedback

-------------------------------

Edit: Added an ohm lock button in the Atomizer screen in version 1.1.2 that just released.

Edited March 3, 2018 by SirTimmyTimbit

Thanks for the reply Tim,

I would like to see System, Live Info, I am a TC Vaper.  Thanks for the ohm lock!

I think your Theme is one of the best looking, nice design, love the large Main Screen.

Thanks.

Thanks I appreciate it. 

Can you point me to other themes that display that sort of information? Or perhaps screenshots of those info displayed on your current theme?

If by Live Info you mean puff information including the graph, you can see that from SYS -> Puff Info. You can even fire from that screen.

If you mean you want to see the current temperature, resistance and power being delivered at any point during the puff, the graphs and numbers are updated live on the main screen.

Edited March 3, 2018 by SirTimmyTimbit

Look to any of the DJLsb based themes/Daniel. 

Gotcha. Thanks I'll look into it.

I'd edit my review and give you 5 stars if I could, just love your Theme, good job! 

It would be also nice to be able to change the material on the profile-screen like many other themes offer...

Great idea and nice theme but I also would like some more controls like the material mentioned above.

Ahh I see. I myself mostly use the main screen, to check battery percentage and watts/resistance. Anything beyond that I use escribe, and that happens once in a blue moon. 

I wasn't aware that a good portion of the users use the mod to do all these things.  I'll update the theme in a few days with the features that it's missing.

Thank you guys for letting me know!

Edited March 5, 2018 by SirTimmyTimbit

Great! I'm really looking forward to it.

Hey guys I updated the theme (v 1.2.0)  with the features you asked for.

You can change the material of the profile via the atomizer screen.

You can see live puff info, last puff info, graph etc. 

Let me know what I'm missing. Thank you for using the theme

Just released a 1.2.1 that changes the menu navigation system.

That's the only difference between 1.2.0 and 1.2.2, how the menu looks and functions..

Here's what the menu looked like in 1.2.0

Here's what the mnu currently looks like in 1.2.2

Edited March 11, 2018 by SirTimmyTimbit

Hi, loving the theme but can you please fix the resistance menu? It's buggy and I don't see what I'm clicking into. It will only show correct menu when screwing new atty.

 

 

Hmm, I think that was from the old version. Not sure I updated or not when taking that picture. It fixed now by the look of it. Just ignore the my last post.

Tim, excellent! 

one of my fav designs so far! 

in system > settings: the puffs #field is to small & date maybe too ...

edit:

when using it in wattage mode you could use voltage for the blue bar instead of nothing ...

Edited March 11, 2018 by realdigital

@blue_moon979 Thanks man! I really appreciate it

The resistance listed under the blue bar will lead to that screen. If there's no atty attached, or if it's not making solid connection you'll get that screen. If it pops up on it's own and it's blank then I'm not sure what's going on. 

@realdigital That's a great idea about graphing voltage. I'll do that in the next version. Thanks! 

I do agree about the field being too small. It still works withing wrapping so I didn't really try to change it up. That screen will probably get an overhaul in a future version. 

 

 

@realdigital 1.2.3 now implements this:

Quote

when using it in wattage mode you could use voltage for the blue bar instead of nothing ...

Thank you so much for the suggestion

@SirTimmyTimbit sweet, works perfect!

You say at the beginning of your intro " All the graphs and numbers should update while firing ". I only get the numbers for power/temperature updating when firing, the graphs are static. The graphs update when I change the value of power/temperature. I was just wondering if anyone else had this. I am using EScribe Suite 2.0 SP12/ firmware 1.1 SP27 (International Edition) if that makes a difference.

3 hours ago, Fr33sp1r1t said:

You say at the beginning of your intro " All the graphs and numbers should update while firing ". I only get the numbers for power/temperature updating when firing, the graphs are static. The graphs update when I change the value of power/temperature. I was just wondering if anyone else had this. I am using EScribe Suite 2.0 SP12/ firmware 1.1 SP27 (International Edition) if that makes a difference.

The other numbers and graphs update too when you fire. But their changes are so small you can't notice it in the graphs.

If anyone finds a bug in this theme in a DNA250c device please let me know. Everything should work, but I don't have one to test it out to be sure.

Hi Tim,

I see that 100W is showing on the VT75D, which firmware version are you using, 26 or 27? 

I'm using 1.1 = 27 on a VT75D and not able to to get it to work in escribe. 

Unfortunately it's the theme designer generated screenshot. I heard of this international firmware that let's the 75c get to 100w, but I'm not using that. I max out at 75w.

Edited March 20, 2018 by SirTimmyTimbit

Good afternoon! Under the firmware 1_1_SP27_INT.sw-service will update?

 

5 minutes ago, Robert_ZR said:

Good afternoon! Under the firmware 1_1_SP27_INT.sw-service will update?

 

Good morning! Yeah that should be good, that's the exact firmware I have on my VT75D.