DNA100C weak puffs

[Michael Guercio]

Don't take this wrong but im glad someone else witnessed this. Ginger & his I.G buddy tried saying im lying lol They will prob ban me now. 

[Michael Guercio]

Also "Truckin Reviews" from y.t got his & it stopped working completely after few pulls. He's currently getn that sorta out now via warranty.

[Wayneo]

Gents, did each of you load the version of escribe that was posted by @James

Does your mod connect?

[dwcraig1]

This is the version that I am using:

https://downloads.evolvapor.com/SetupEScribe2_SP25_INT_ServicePack.exe

[Joshua12345]

I didn’t know that existed, I will connect and download it tommrrow

[Joshua12345]

Here’s a video of the problem happening

IMG_4338.MOV

[dwcraig1]

If you can provide us with a snippet like this we very well may be able to see what's going on.

Perhaps tomorrow I'll set up a much lower resistance coil and see if I can reproduce it.

 

[dwcraig1]

This is in reference to the coil in the video (0.16 ohms)

It will take a good high amperage cell with good battery sled contacts to achieve 100 watts with that coil.

I left out the one were it calculated to 4 volts but that's what it came out to.

https://www.the12volt.com/ohm/ohms-law-calculators.asp

 

[Michael Guercio]

Ty but I can't as I don't own a computer.

[Michael Guercio]

Mine just did it with stealth mode on & a samsung 30T true 35amp batt.. 

[dwcraig1]

  On 5/10/2021 at 12:55 PM, Michael Guercio said:

Mine just did it with stealth mode on & a samsung 30T true 35amp batt.. 

Expand  

What was the standing voltage of the cell prior to firing?

[Michael Guercio]

4.08

[Joshua12345]

Yeah that’s exactly how mine will do, it will do it with a fully charged Samsung 40t battery, I will have it set on sixty watts, and once the screen turns black, I will hit it and it will only hit at about forty. And it only does this part of the time. This is why I think it isn’t something it’s supposed to do.

[Joshua12345]

See, fully charged Samsung 40t and it was firing at 69, I had it set on 70.. but after the screen went black i fired it and it only hit at 42watts

[Joshua12345]

And my battery is at 4.07 volts

[Michael Guercio]

Yup definitely not suppose to do. Have you tried to contact Ginger Vapor about this. I did and they told me my build is too low lmao (.37) 

[Joshua12345]

Yeah, kinda sucks cause I like realtor low builds, about as low as you can possibly run on 100 watts, but it messes up more the lower the build is. Does yours just do it randomly, or does it do it only once the screen shuts off? 

[Michael Guercio]

My build NOT low and it should fire a .1 with a 30amp batt. At least until batt hits 3.5ish volts. I understand "we" should be using a higher build in a single batt mod but should stipl work.

[Joshua12345]

I’m gonna try to do that update and tweak with it on the computer tonight after work and I’ll update

[Michael Guercio]

Ok great! Plz keep me posted..

[Joshua12345]

Does yours do it only after the screen goes off? Or just randomly 

[Wayneo]

@Joshua Can you post that theme as well later or under File -save. That'll have a .ecig extension. Device Monitor snip like DW asked. Are your batteries new? 

[Joshua12345]

Yeah battery is now Samsung 40t with between 100-90 percent charge right now and problem is occurring. I’m gonna get it on the program when I get home, around five or six, could u give me explicit instructions on how to do this? The program confuses the crap out of me 

[Michael Guercio]

It did it with screen on, off & stealth. All my 30Ts are brand new via IMR and tried few different one's. Still does it.

[Wayneo]

Start escribe. Go under "File". Click "Save". Post that .ecig file here.

At the top of the screen you should see a message to apply a new service pack, click that, OR Go under "Tools", bottom one is "Apply Service Pack" follow directions.