Richieriotoffit Posted May 6, 2019 Report Share Posted May 6, 2019 How do I get the preset menu? It's a pain having to change all sorts of info each time I swap my attys around there must be a preset function I'm too daft to find pls help me Link to comment Share on other sites More sharing options...
Vapors Tongue Posted May 6, 2019 Report Share Posted May 6, 2019 you can go into escribe and preset the profile setting wattage and pre heat and replay on all other features that the material you choose can start off with like a basic level you cant start from like setting the watts to 50 or 60 and preheat options to a required level before altering them on the device , that's as much as a preset you can do - changing materials or swapping tanks will always trigger the new coil detected which you have to set - as the photograph shows where to alter the default levels 1 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 6, 2019 Author Report Share Posted May 6, 2019 Sorry, I get that bit dude what I should have asked was how do I access different profiles on the device itself? Link to comment Share on other sites More sharing options...
Chris Musampa Posted May 6, 2019 Report Share Posted May 6, 2019 Just move the cursor to the profile name, press select (middle button), up/down to scroll through the profiles then select when you on the one you want. 1 Link to comment Share on other sites More sharing options...
Vapors Tongue Posted May 6, 2019 Report Share Posted May 6, 2019 (edited) on my theme or where it has the profile tab on top , here in the photo its called profile one where on the device it may say watts , SS316 or replay etc - to select this tab is what you do when altering wattage , you navigate the menu by the 3 buttons or two buttons on your device and the 2 outer buttons act as up and down and the middle is to select or highlight that particular setting as you would do for changing watts and once select you use the outer button again to change values or cycle the profiles Edited May 6, 2019 by formula 1 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 7, 2019 Author Report Share Posted May 7, 2019 OK great guys thanks I think lol. So what Im thinking is I have to create "profiles" on my laptop and upload to the device? Say profile1 for a rda, profile2 for a different rda, profile?? for another 1 etc? Am I right? Link to comment Share on other sites More sharing options...
Vapors Tongue Posted May 7, 2019 Report Share Posted May 7, 2019 7 hours ago, Richieriotoffit said: OK great guys thanks I think lol. So what Im thinking is I have to create "profiles" on my laptop and upload to the device? Say profile1 for a rda, profile2 for a different rda, profile?? for another 1 etc? Am I right? you can do that if you wish but make sure you backup your original settings , i suppose its one way to get a round pre determined setting for your particular needs 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 7, 2019 Author Report Share Posted May 7, 2019 @formula 1Thanks mate that's what I was after, I got a bit of a bashing on another thread for asking this same question. I said there I struggled with mental health issues and my concentration along with post traumatic amnesia makes even wording simple sentences an issue the vape community as a whole can be a lil self righteous at times it makes me mad so thanks dude for all your help. If you don't mind I'd like to use the theme u use also is it available? 1 Link to comment Share on other sites More sharing options...
retird Posted May 7, 2019 Report Share Posted May 7, 2019 34 minutes ago, Richieriotoffit said: @formula 1Thanks mate that's what I was after, I got a bit of a bashing on another thread for asking this same question. I said there I struggled with mental health issues and my concentration along with post traumatic amnesia makes even wording simple sentences an issue the vape community as a whole can be a lil self righteous at times it makes me mad so thanks dude for all your help. If you don't mind I'd like to use the theme u use also is it available? You were not bashed... you were given good information... and asked to watch the video. to have a better understanding of DNA technology and EScribe.... we are still available.... MAKE SURE TO COPY YOUR *.ECIG FILE TO YOUR COMPUTER BEFORE MAKING ANY CHANGES... that way you can put it back to the original settings should you mess up something... Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 7, 2019 Author Report Share Posted May 7, 2019 OK so not bashed maybe although I had explained I struggle to understand basic instructions due to my mental health and yes I've watched the video almost twice now and I've not heard one mention of the problem I had/have re profiles I'll leave it for a while now and go back to my mech where there's very little to understand Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 7, 2019 Author Report Share Posted May 7, 2019 Any idea why I can't just access profiles on the device straight out the box as many cheaper chips have this option like memory settings? Link to comment Share on other sites More sharing options...
retird Posted May 7, 2019 Report Share Posted May 7, 2019 Which device do you have? Different Themes have different screens to work with profiles..... Again profiles can be set in EScribe and uploaded to the device... Post a copy of your *.ecig file and I'll look at it and see where you need to go to set profiles.. 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 7, 2019 Author Report Share Posted May 7, 2019 Lost vape paranormal dna250c I was just puzzled as to why I had to use my laptop to create a preset profile as tbf ive usually used cheaper mods that I can do this on from the mod itself no pc needed Link to comment Share on other sites More sharing options...
retird Posted May 7, 2019 Report Share Posted May 7, 2019 13 minutes ago, Richieriotoffit said: Lost vape paranormal dna250c I was just puzzled as to why I had to use my laptop to create a preset profile as tbf ive usually used cheaper mods that I can do this on from the mod itself no pc needed Read my last post again, I'll be happy to look at the *ecig file then I should be able to tell you how to get to the right screens........ Themes can be designed differently thus profiles can be found on different screens..... other devices are not as user definable as a DNA... 1 Link to comment Share on other sites More sharing options...
Vapors Tongue Posted May 7, 2019 Report Share Posted May 7, 2019 1 hour ago, Richieriotoffit said: @formula 1Thanks mate that's what I was after, I got a bit of a bashing on another thread for asking this same question. I said there I struggled with mental health issues and my concentration along with post traumatic amnesia makes even wording simple sentences an issue the vape community as a whole can be a lil self righteous at times it makes me mad so thanks dude for all your help. If you don't mind I'd like to use the theme u use also is it available? no problem , my themes and other users themes are available in the download section here https://forum.evolvapor.com/files/ alternatively if you want my themes you just need to click on my profile and look for uploaded files. 1 Link to comment Share on other sites More sharing options...
Chris Musampa Posted May 8, 2019 Report Share Posted May 8, 2019 (edited) 22 hours ago, Richieriotoffit said: Lost vape paranormal dna250c I was just puzzled as to why I had to use my laptop to create a preset profile as tbf ive usually used cheaper mods that I can do this on from the mod itself no pc needed You can access them on the mod itself, you can also change most settings for each profile on the mod. Escribe allows you to rename the profiles to suit you (for example naming each one for a particular atty)and will also allow you to change some profile settings which might not be available in your mod's theme, like the coil material or whether it's a temp controlled profile. Also, to clarify, you don't need to create profiles, the device has 8 profiles, if I remember rightly they're named after common materials by default, you just need to rename them and set them up to suit your purposes then upload them to your mod. Edited May 8, 2019 by Chris Musampa 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 8, 2019 Author Report Share Posted May 8, 2019 The only profiles I can access through the mod are Watts, watt boost, ss316, ss430, ni, ti and kanthal there are no "empty" profiles on the mod lostvape Paranormal dna250c Link to comment Share on other sites More sharing options...
Chris Musampa Posted May 8, 2019 Report Share Posted May 8, 2019 8 minutes ago, Richieriotoffit said: The only profiles I can access through the mod are Watts, watt boost, ss316, ss430, ni, ti and kanthal there are no "empty" profiles on the mod lostvape Paranormal dna250c That's right dude, if you go into escribe you can change the name of them and set them to something more useful FOR YOU. So you might, for example, rename profile 1 to be named "Goon" and set that profile's material to SS (or whatever you material you use in your goon), rename profile 2 to "RDTA" and set it's material to whatever you use in your RDTA, then when you upload them to your mod those are the profile names that will be displayed instead of the default profile names watts, watt boost, etc. 1 Link to comment Share on other sites More sharing options...
Richieriotoffit Posted May 8, 2019 Author Report Share Posted May 8, 2019 @Chris MusampaI get all that I'm just surprised that I can't do that from the mod as much cheaper mods often have "blank" presets smok alien being just 1 that springs to mind it had 20 I think all of which could be customised and set from the mod. Link to comment Share on other sites More sharing options...
Chris Musampa Posted May 8, 2019 Report Share Posted May 8, 2019 What you are allowed to set on the mod depends on the theme you're using, I think the default theme allows you to change the normal 'day to day' setting s like wattage, temperature, boost settings (I can't remember as I didn't use the default theme much, I dived straight in and made my own theme as soon as I built my first 75C based mod). I don't remember if the default theme allows you to change things like material or replay enable in a profile, my theme certainly doesn't allow to set those but those are things I will set once and probably never change. Link to comment Share on other sites More sharing options...
Wayneo Posted May 8, 2019 Report Share Posted May 8, 2019 Can we all just STOP for a moment! @Richieriotoffit let me ask you an honest question. By creating multiple posts with multiple persons talking, is it all just a big mush to you? Would you prefer just 1 voice, and if so who? Clearly @formula 1 , @retird , @Chris Musampaand I have been trying to work with you, and all telling you the same thing across different posts. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now