Smeef Posted March 3, 2017 Report Posted March 3, 2017 Just finished it up tonight.Alpinetech 1550 P+Varitube 14mm 510Powerhobby 1500 mah 45C lipo 3
chilly814 Posted March 3, 2017 Report Posted March 3, 2017 Just came yesterday! Mod: HexNA 900 Chipset: DNA250 RDA: GOON with a .22 fused clapton build 1
DJSammy Posted March 8, 2017 Report Posted March 8, 2017 My first DNA device. VT250 with Dumptank 40mm! 1
mooq! Posted March 15, 2017 Report Posted March 15, 2017 Finder 250 with Recoil on top (DC Stapled Alien @ 0,12 ohm) 1
Trabant Dave Posted March 23, 2017 Report Posted March 23, 2017 My Triade DNA250, I've a trio of different back covers; the two in the picture (Black, Red Leather) and the one the mod is wearing but out of shot in the cracked antique leather which is my favourite!I've standardised on the Kanger Subtank Plus with it's 7ml capacity and have one using the Ni200 SSOCC coils, mainly for work - and a pair that I use the Kanger Mini RBA+ mainly for home use.Also gone heavy on the heatsinks too.As a terrible tinkerer (classic cars, model-building etcetera....) I've added custom screens using eScribe and currently looking at picking up a worn/used Triade with a view to strip it down, and brass-plating the casing and back - the intention being to create a unique steampunk themed Triade. I've gone from 20 L&M Reds a day, through an eLeaf 30w iStick and then a Cuboid, and loving the versatility of the DNA - as one of my work colleagues said recently, I've turned a habit into a hobby.I'd say more of an obsession really.............RegardsDave 1
mooq! Posted April 18, 2017 Report Posted April 18, 2017 Just came in today, my Triade 250 with Aromamizer Plus Gunmetal 5ml (DC @ 0.10 ohm) on top
Enrico Posted April 22, 2017 Report Posted April 22, 2017 This is my first DNA 166 with on top the Griffin 25plus 1
UKDTweak Posted May 31, 2017 Report Posted May 31, 2017 Just completed this, I designed and printed the mod on my own kit, slightly bigger than a hammond 1550p but much lighter 4
dclanz Posted June 13, 2017 Report Posted June 13, 2017 (edited) Here ya go! Mod: VaporShark DNA 250 Tank: Merlin Mini RTA Edited June 13, 2017 by dclanz Added mod and tank descriptions
UKDTweak Posted June 16, 2017 Report Posted June 16, 2017 Just built my second 3d Printed DNA250, with a 1300mAh lipo.. 4
Tmac Posted June 16, 2017 Report Posted June 16, 2017 On 4/22/2017 at 6:31 AM, Enrico said: This is my first DNA 166 with on top the Griffin 25plus Soooo nice! 2
Canadianvape Posted June 18, 2017 Report Posted June 18, 2017 Ordered yellow VT250s for Father's Day, should be here in 1-2 weeks 1
MikeTheDude Posted June 21, 2017 Report Posted June 21, 2017 (edited) Phoenix Immortal DNA 250 Custom Edited June 21, 2017 by MikeTheDude 4
UKDTweak Posted June 26, 2017 Report Posted June 26, 2017 Recently got myself a 3D printer, have already build three DNA mods, all the typical rectangular box shapes, but now i have designed and printed my own take on teh Boxer, just waiting for the board to arrive so i can build it, all press fit bar the board screws and 510 nut... 4
awsum140 Posted June 26, 2017 Report Posted June 26, 2017 (edited) I've had the boards, DNA250s, since they came out and got the enclosures about two months after that. Finally got the pair of them done. Drip3D enclosures. They seem bead blasted then anodized and the finish is really nice and feels nice to hold, no finger prints either. I use FDV V3 510 connectors, had to use them since they've been sitting for a few years, and Nanotech 1300mah batteries. The black one is mine and has an Aromamizer V1 on it. The violet one is for the Mrs. and has a Fogger V4.1 on it. Here they are, side by side, with the covers off - And here's a closer view of the inside of mine, but they're bot the same. I compromised by mounting the board sled/screen holder with LokTite, gel, instant adhesive. The batteries are secured with Velcro, two one inch squares per battery. Normally I would have kludged some metal brackets and JB welded them into place for both the sled and battery but I wanted to get these things completed and in use. Overall, I'm happy with them but still need to run case analyzer on both of them. Edited June 26, 2017 by awsum140 7
Canadianvape Posted June 26, 2017 Report Posted June 26, 2017 Just arrived! Love the 2/3 cell option although it's tiny on 2 cells! It does not have the mod electrical resistance, shows 0, anyone know it? 1
KyleC06 Posted June 27, 2017 Report Posted June 27, 2017 My LE Black Frame and Grey Snake Skin Lost Vape Triade DNA250 1
UKDTweak Posted June 27, 2017 Report Posted June 27, 2017 Got my 3D Mod built, set for dual 18650 but should fit a 1000mAh lipo too. 1
UKDTweak Posted July 12, 2017 Report Posted July 12, 2017 (edited) Another print of my Boxer Style, V3, cleaner and roomier inside for dual 18650 or Lipo. Edited July 12, 2017 by UKDTweak 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now