Clean Colors (75C/250C w/Replay! - Many colors available) v2.4

   (17 reviews)

2 Screenshots

About This File

Note: The lightning bolt on the battery is only visible while charging.

  • Replay ready! (TC and wattage modes available too) - See below if you are having trouble with Replay
  • Main menu is on the top right
  • You can hide data on Main screen in Display settings (resistance, voltage, etc)
  • You can hide date/time from Lock screen in Time Config page (also can choose MM/DD or DD/MM date format)
  • There is now a ONE WATT version for those who want one-watt increments on the main screen (regular version is 5-watt increments). Now available in BLUE, BLACK, GREEN, and RED
    • see downloads page: Clean-Color--ONE-WATT-#_#.ecigtheme
  • A LOT of other stuff.. check it out!

--------------------------------------------------------------

Replay infoThis theme works with Replay for 75c devices (250c devices work with Replay by default). BUT you need to have the International Edition of EScribe 2.0 SP15.1 or later. Your 75c needs to have the right firmware as well (at least 1.1 SP33.2 -  that one works for me), once you update ESscribe and connect your device it should prompt you to update firmware. You also MUST enable Replay in your EScribe profile for it to work.

Using replay: once the above has been completed, load this theme and switch to a replay-enabled profile. There should be a "NO REPLAY" button seen on the main screen. This means there aren't yet any puffs to save. So take a few puffs, until you find one you like. Then the button should change to "SAVE," and you can click that to save that latest puff. Once Saved, the button changes to "PLAYING" and you are in Replay mode. Click that if you want to end Replay. 

If you are having trouble, check the Replay menu because it gives you more info: Replay Available (if theme/coil supports Replay [read-only]), Replay Ready (Replay is ready to be activated [read-only]), and Replay Active (you can toggle this switch to save your last puff and activate Replay).  You also cannot use a plain kanthal coil for Replay. You can use any temp sensing wire, including combinations (e.g. SS wrapped with kanthal). 

--------------------------------------------------------------

If anyone has suggestions, improvements, bugs, or anything else, please reach out in the comments below and/or leave a review. New update coming soon!! Thanks!

Here are the available color options. Let me know if you have requests for others!

2-2compare.thumb.png.6f84608149ae89dfdea4823c51be88a5.png


What's New in Version v2.4   See changelog

Released

Changelog v2.4.1:

  • Fixed ONE WATT versions.. they were not doing one watt increments in replay mode. That's fixed now. 

 

Changelog v2.4:

  • Fixed LED indicator: blue when firing, red while charging, green when full battery (with a pulsing effect)
  • Added option to change date format on main screen (either MM/DD or DD/MM, see Time Config menu)

 

Changelog v2.3:

  • Fixed main screen:
    • temp changes to voltage when in watt mode
    • small voltage changes to puff count when in watt mode (so voltage isn't displayed twice)
  • other minor tweaks/fixes

 

Changelog v2.2:

  • Fixed some items on the main screen what weren't positioned perfectly
  • Changed highlight/selection colors slightly for better readability
  • Added new ONE WATT version colors: now available in Blue, Green, Black, and Red

 

Changelog v2.1.2:

  • Added a ONE WATT version for those who want one-watt increments on the main screen. Wasn't sure if you all also wanted one degree increments on the temp, but that didn't seem useful so I kept that at 5. Note the it's currently only the blue theme that has the one watt version, but if you have requests for other colors, let me know.

 

Changelog v2.1.1:

  • Added Pride color scheme upon request

 

Changelog v2.1:

  • Updated battery icons to more easily tell capacity
  • Updated Replay icons so they are colorless (works for any background color), and now it goes > NO REPLAY (not available) > SAVE (ready to save puff) > PLAYING (Replay active)
  • Updated battery icons to show if you are charging or low battery (<25% = red, lightning bolt icon during charging)
  • Display page split into Display Settings and Main Screen Config pages
  • Puff counter is visible on main screen when in wattage mode (this can be hidden in Main Screen Config page)
  • Screens rearranged to be more cohesive and consistent
  • Items moved away from very edge of screen when possible to improve visibility
  • Added Mod Info screen that shows info specific to the device (battery pack volt, atty volt and current, mod/ambient temp)
  • Battery percent no longer changes color (so it fits in with other wallpapers, e.g. red or green)
    • the battery icon changes for charging or low battery
  • Added more colors (see screenshots or download page)

 

Changelog v2.0:

  • The theme is now called "Clean Colors" and offers many different color options
  • Also made a bunch of visual and usability improvements
  • Just added "Abstract Blue and Green" color option (which is technically v2.1, or more like v2.0.5.. more improvements to come for the actual v2.1)

 

Changelog v1.9:

  • fixed About screen thanks to @s3r
  • other minor stuff (there's now a Creative Commons license on the credits page.. if you want to use it for commercial use, just reach out to me)

Updated PLAINTEXT version too with the same. 

 

Changelog v1.8:

  • changed text color scheme slightly for readability (no more orange) 
  • changed selection highlighting for for better visibility
  • rearranged main screen a bit (battery percent and resistance are now larger and above voltage and current, since they are generally more useful)
  • fixed battery icon not turning red when charge was low
  • adjusted back button AGAIN to make it more visible when selected
  • changed battery icons to switch to red at 25% instead of 20% (keep your batteries healthy long term- charge them before they get too low!)
  • updated toggle switches and sliders so they are move visible when selected
  • adjusted Replay button on main screen to be more visible/easier to use, and I think it just looks better

Same changes for PLAINTEXT version. 

 

Changelog v1.7:

  • updated icons for better visibility (new sweet toggle switches, new battery/menu icons, back buttons, etc.)
    • edited a lot of them down to the pixel level to get rid of anti-aliasing
    • the checkboxes are now slider toggle type switches
  • added second version of the theme with simpler fonts by request (the "plaintext" version - also might be more legible if you are having trouble reading the main theme)
  • tweaked highlighting of selected objects for better visibility
  • adjusted organization of main screen to clean it up a bit (also to have more room to show profile names, though I recommend to keep profile names short- less than 15 characters or so if possible)
  • other minor tweaks and fixes

 

Changelog v1.6:

  • Changed settings for stats on main page. Now in the Display menu you can select to HIDE them (rather than select to SHOW them as it was previously). This is mainly so the screenshots are more accurate. If the stats are not displaying on the main page (current, voltage, resistance, battery percentage), check the settings in the Display menu.

 

Changelog v1.5:

  • FINALLY fixed the reset issue. Stats on "Current Stats" screen can be reset, and stats on "Total stats" screen cannot. This is by Evolv's design, it's not up to me. This one's for Ronbon172!!! Thanks for your patience :thumb:

 

Changelog v1.4:

  • changed wallpaper gradient slightly (let me know if you all have suggestions for improvements here)
  • adjusted Battery info page to remove Power bank settings for devices that don't support it (75c)
  • renamed Puff Stats screen to Total Stats
  • added Current Stats screen. These are the stats that you can reset. So the Total Stats screen will always have total numbers since you bought the device, and CANNOT be reset
  • changed color of selected items to more clearly indicate selection
  • changed back button, and now back button (almost) always takes you back to main screen (I found that more useful, since when I'm done in a sub-menu I generally want to go back to the main screen)
  • added Replay status and Save Puff button to home screen (no menu-diving required for Replay anymore)
  • Main screen shows when replay is available with the check box (enabled for current profile, Replay-compatible coil), then when you have a puff that you can save the the SAVE button appears and you can press that to save puff. CANCEL will turn it off
  • changed Replay screen to show Replay Available (based on coil/profile), Replay Ready (Replay is ready to be activated), and Replay Active (puff saved); still warmth adjustable
  • added atomizer voltage to main screen
  • added options to Display menu if you want a cleaner look on the main screen (can show/hide items from main screen: voltage, current, battery percent, resistance)
  • added option to show/hide date and time on lock screen- see Time menu (since time/date resets every time I change my battery, I find it useless)
  • adjusted New Coil screen so it shows both new resistance and old resistance
  • my logo on the About screen fills up according to room temperature.. acts as sort of a thermometer :) (actually this is not working yet.. I don't know if you can use temperature with the gauges, I'm working on it)
  • Removed option to select battery icon on main screen to take you to battery page, removed option to select resistance on main screen to take you to Coil Info page (let me know if you guys want this rolled back, I didn't find it very useful since those screens can be reached from the menu
  • other minor tweaks and fixes

 

Changelog v1.3.1:

  • Forgot to include Preheat settings page in main menu. It's now added. 

 

Changelog v1.3:

  • Replay mode added! You must enable replay in your EScribe profile for it to work
  • "Replay ON" message is displayed on main screen when it Replay is on and in use
  • Replay mode screen: status, view/change profile, notification if replay is available, enable replay, adjust warmth
  • Added Battery Info page that supports battery pack info (and live data): up to 4 cell voltages (some are hidden if your mod has less than 4 cells), live battery and atomizer voltage, live battery and atomizer current, power bank mode enable, power bank status
  • Added dedicated Display Settings screen: brightness, stealth
  • Main screan rearranged so the most useful data is on top (easy navigation between temp > power > menu)
  • Changed main menu to display profile, so you can change profile from there instead of having to go through menu
  • I added a status field on the main screen so you can view error messages there
  • Mod info screen (renamed Live Info) now with more data: live ohms, live voltage, live current, live coil temp, etc.
  • Battery percent and icons turn green during charging, and red when charge level is under 20% (normally blue/white)
  • Battery percent size increased on main screan for readability
  • Back buttons made a bit smaller
  • Back button from settings pages now go back to main screen (instead of main menu) (back button from info screens still goes back to info menu)
  • Selecting battery icon on main screen takes you to Battery Info page
  • Selecting resistance reading on main screen takes you to Coil Info page
  • If Replay is on, selecting "Replay On" button on main screen takes you to Replay settings page
  • All icons/gauges changed to blue color scheme
  • Made all menu lists round robin enabled
  • Minor tweaks and fixes



User Feedback

Recommended Comments



1 hour ago, niandra3 said:

Ah it's tough.. everyone wants something different. Most people these days use either high wattage or TC (me included), so I never need like 42w, because 45w is close enough. I think 5w increment is a good medium.. unless you are vaping under 20w, there isn't really a need for smaller increments. And for me, 45 is a "straighter" number than 44 :) 

I'd recommend you can edit this very easily in the theme when you download it, before installing it just click Edit > Screens > Main Screen > click on the Watts on the main screen > click Options button on the right > change Step size. The options are 1, 2, 5, or 10. 

Yep, I know. It's just an optical thing, a little ocd.
I will customize it for myself, I'm going to set up a virtual Windows, the theme editor crashes exactly in this dialogue under Linux :)

Share this comment


Link to comment
Share on other sites
2 minutes ago, photobix said:

Yep, I know. It's just an optical thing, a little ocd.
I will customize it for myself, I'm going to set up a virtual Windows, the theme editor crashes exactly in this dialogue under Linux :)

Well if you keep having trouble let me know, I can easily package up a custom release for you if you tell me which color you want. Just didn't want to change the main theme since the 5w seems to be the most popular choice. 

Share this comment


Link to comment
Share on other sites
20 minutes ago, niandra3 said:

Well if you keep having trouble let me know, I can easily package up a custom release for you if you tell me which color you want. Just didn't want to change the main theme since the 5w seems to be the most popular choice. 

That's too much niceness, thank you!
I get a Windows but still running and the next version for Linux will work, I'm sure.
Now I enjoy your theme.

Share this comment


Link to comment
Share on other sites

I am a MTL vaper.  I can't get the wattage down to 1 watt increments.

  • I have double clicked the downloaded file.
  • I click on edit.
  • I click on screens.
  • I click on the main menu screen (on the right).
  • I highlight watts.
  • I click options.
  • I change step size down to 1 and click ok.
  • I click file > save as "Clean-Color-BlueGreen-2_1 1 watt increments" and exit.
  • I double click the file and click edit to check it's taken to 1 watt increments.  It has. 
  • I click the file followed by "Yes, install".
  • My dna75c is set at 15 watts so I try and go up to 16 watts.  It goes up to 20 watts (still 5 watt increments)!  My head explodes.

I have gone back to the default screen and tried installing Clean-Color-BlueGreen-2_1 1 watt increments again but still got 5 watt increments.

Have you any cures for this please?

Share this comment


Link to comment
Share on other sites

I wrote out instructions for that a couple posts up. And would be happy to make a one watt version for anyone who  wants one  But seems like you're sorted out. Enjoy!

Share this comment


Link to comment
Share on other sites

I saw your post niandra3 but didn't realize I had to change the value of every behavior.  I just did it for the power.  That's where I was going wrong.

Thank you for producing it.  :cool:

Edited by mikesoimtold

Share this comment


Link to comment
Share on other sites
2 hours ago, mikesoimtold said:

I saw your post niandra3 but didn't realize I had to change the value of every behavior.  I just did it for the power.  That's where I was going wrong.

Thank you for producing it.  :cool:

Oh ok I see.  Now that I've got a few requests for it, I'll probably release a 1w version of the theme going forward. Keep an eye out for that, since I'm continually updating and improving  the theme.

I'll probably do it for the Blue version of the theme, unless anyone has objections. That's the most popular one by far.  

  • Like 1

Share this comment


Link to comment
Share on other sites

@mikesoimtold just added a ONE WATT version of the blue theme if you are still interested. 

@photobix thanks for the help, I ended up adding an official 1w version thanks to your suggestions. 

Anyone else, feel free to requests colors if you want a 1w version that isn't blue (can't do them all.. but I can make a couple.. there's already a lot of versions to keep track of). 

Share this comment


Link to comment
Share on other sites

@niandra3  Thank you for the great theme! One quick question: I cannot seem to find how to change the Preheat Power value (by default set @300W) in the respective screen. Any advice?

Many thanks in advance!

Share this comment


Link to comment
Share on other sites

@Amon Glad you like it. It might be due to your profile? I honestly don't use preheat so I don't know much about the inner workings, but if I enable preheat in the menu on my device I'm able to adjust wattage and temp.  

Looking at escribe, it seems you can only adjust preheat wattage with TC materials (not watt mode), in wattage mode all you can change is punch.

In fact the theme is set up to hide the preheat wattage if it's not available. Is it showing up on the Preheat page and you can't change it, or is it just not there? 

Mind telling me what device (75/250) and what your profile is like (TC/watt/coil material)? I definitely want to get this fixed if there's a bug. 

  • Like 1

Share this comment


Link to comment
Share on other sites

@niandra3  Thank you very much for getting back to me so quickly! Let me give you a bit more info: First of all, I am using the theme on a 250C device. I am using SS coils on "Replay" profile (the default Evolv profile). When I navigate through the menu to "Preheat", the Power value is visible (set @300W), but I cannot change it. At the same time, "Punch" slider can, indeed, be changed.

Is it possible that Preheat Power is not accessible/active with Replay? However, the value is there.

Apologies if my question sounds naive :)

Thanks a million!

 

Share this comment


Link to comment
Share on other sites

@Amon Yeah that might be it. Replay is such an enigma they provide so little info about it. I'll do some testing in my end and if theres a problem, I'll let you know and put a fix out tonight with an update. Or it might just be one of those Evolv things that we can't do anything about lol. That would be my guess since replay is supposed to be sort of an automatic thing, they don't give you much control over anything. That's kind of why i still use good old fashioned TC

Edited by niandra3
  • Thanks 1

Share this comment


Link to comment
Share on other sites

@Amon just checking in. Been very busy with work so I haven't spent too much time looking into this yet, but I haven't forgotten about you! I'll report my discoveries soon 

Share this comment


Link to comment
Share on other sites

 @Amon So I just did a bunch of testing on both my devices (75c and 250c) and wasn't able to replicate your problem. I have a replay profile with SS and was able to enable preheat and adjust the wattage and everything through the theme. Are you up to date with the latest International EScribe and device firmware? In Escribe, go to the Help menu > About Escribe and you can find your version there. I use the latest: 2.0 SP15.1. 

For your device, you can find it in the theme Menu > About. I'm using the latest Firmware: 1.1 / Service Pack: 33 / International (it may or may not say "INT" depending on if you are using the latest version of my theme, but there should be at least two numbers). If you aren't using the latest versions, be sure to update them. You can get the EScribe here and when you plug your device into EScribe if you don't have the latest firmware it will ask if you want to update (you should). 

If it's not a version thing, I'm not sure what else it could be. I haven't had reports of anyone else having the same problem.

 

Share this comment


Link to comment
Share on other sites

Good morning,

I've tried it for the first time, now: I can enable preheat, but not adjust the wattage.
I'm on the latest INT version on the 250c board. Replay is enabled, in the default replay profile.

Cheers, photobix

Share this comment


Link to comment
Share on other sites
On 6/15/2018 at 2:21 AM, photobix said:

Good morning,

I've tried it for the first time, now: I can enable preheat, but not adjust the wattage.
I'm on the latest INT version on the 250c board. Replay is enabled, in the default replay profile.

Cheers, photobix

Ok so I might have figured it out.  Looking in EScribe, in the default Replay profile it uses wattage as a material, and for that you can only adjust Punch/Preheat (in Escribe there are no other options available).

So in my theme, when using a Replay profile with wattage as a material, you are unable to adjust the preheat wattage. You can only adjust the Preheat/Punch slider on the bottom (it's the same in EScribe when you look at a Replay profile with wattage). So I think it's an Evolv limitation. 

So if you want to be able to adjust the wattage, try making the selected material SS in the profile (assuming that's the material you're using). Or whatever TC material you are using (since Replay doesn't work with kanthal anyway). 

If there is anyone out there using a Replay profile with Stainless Steel selected as a material (in the profile), and they still have this problem, let me know. Because I tested that myself and it works fine for me on my devices

@Amon

Edited by niandra3

Share this comment


Link to comment
Share on other sites
14 hours ago, niandra3 said:

If there is anyone out there using a Replay profile with Stainless Steel selected as a material (in the profile), and they still have this problem, let me know. Because I tested that myself and it works fine for me on my devices

You're right, the wattage was my fault.

Share this comment


Link to comment
Share on other sites
12 hours ago, photobix said:

You're right, the wattage was my fault.

It's all good.. I'm happy to know one way or the other. Now I just gotta adjust the theme so that stuff is hidden when you can't adjust it. 

Share this comment


Link to comment
Share on other sites

Hi, niandra3 - great theme... I love it, but still I have some issue at my Mirage - there is no ohm visible on screen. At Therion it is OK. I tried different colors and older versions, but still the same

Any sugestion how to fix it?

Thanx

Clean_colors.jpg

Share this comment


Link to comment
Share on other sites

@Korwin there is an option to show/hide which data you want displayed on the main screen. Go to Menu > Main config and there is an option to show or hide ohms on the main screen. That should do it. 

Edited by niandra3

Share this comment


Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now