Jump to content

Recommended Posts

Posted

You should be fine with any 800mah and up 3s lipo. 

My Hana v200 has a 950mah 3s lipo and it lasts a full day of heavy vaping. I built a mod with a 1300mah and it lasts more than 1.5 days. 

Posted

The Wh escribe calculator says 16.28 Wh at 3.7v ( eleaf batt) if you type in 1500 mAh you should get 16.65 Wh at 11.1v

Posted

Sorry can't help you on that I've got the tube batts (18650) I'm going to be using them in my mod, total amount is 23.1Wh (2100mAh)

Posted

You can use 2 or 3 18650 batts I'm using sony vtc4 here's a lay out on connecting the batteries if you use two batteries soder or jumper 2 and 3 together on the board and run the #2 wire to the battery and make sure you change it in escribe to 2 cell. Oh! I forgot to say using 2 batts your wattage will max out at 133w

image.jpg

Posted

That's cool, if it's super small I might get it, but I'll just make sure my batts are in the right way

Posted
lalemandrew said:

So if I use 3 will I get 200w and if I buy the battery evolv sells do I need 1 or 3 of the 19.99$ packs


You only need one 3S LiPo like the ones Evolv have for sale.

For 18650s: 2 will limit you to 133 W but 3 will allow the full 200W, but for bothe these configurations there is no reverse battery protection and you need good cells, on paper that is only the Sony VTCs ATM, but the LG HE2 and Samsung 25R will almost certainly be OK.
Posted
lalemandrew said:

S3 will last how long


That is like the how long is a piece of string question as they come in many sizes, to compare them to 18650s times the mAh by 3, but they have more use able power down low so it would be a little better.  I reckon the one Evolv sell 900 mAh will last me about 1.25 - 1.4 times as much as a Samsung 25R vaping at 36 W.
Posted

Based on what you said I think anything over 500mAh 11.1v will last you a day

Posted

Like for me a 2100mAh batt will last me 2 days if I use 3 batts at 11.1v (2100mAh) I should get 5.6 days before I need to recharge

Posted

Well...... It's not really a box it's more like a cylinder, the cover/housing is going to be aluminum here's a pic of the battery holder I will have to modify the holder cuz right now it's made for parallel batteries

image.jpg

Posted

I'm guessing it would but everyone vaps different, if I was you I would give it a try at least you will know where you stand and you could use that as a base line to get a bigger mAh battery

Posted
juliange said:

How do the higher mAH 3s LiPos compare... such as 2200mah? Are they usable? I'm trying to wrap my head around the battery requirements and what is too much...



You can easily use anything from 900 up to...well as big as you want to carry.  The C rating required goes down as you get higher in mAh or Ah.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...