UKDTweak Posted July 14, 2017 Report Share Posted July 14, 2017 (edited) Third Boxer Style, this one fitted with a dual 18650 sled. Linky... Edited July 14, 2017 by UKDTweak 2 Link to comment Share on other sites More sharing options...
Akira Samidare Posted July 15, 2017 Report Share Posted July 15, 2017 Well I must say the only way to push this chip to the limit is to Craft your own mod. Just like this GIANT mod featured with a MASSIVE 4900mAh 11.1V (54.49Wh) Li-po power set. But I just didn't notice the size and weight it's gonna be untill I put the battery set inside........ and all of a sudden I was like, is it such a waste of this massive power storage? so I bought a 12v to 5v USB chip and got this done: a little bit flaw there but that doesn't matter. SO i got this shit Aluminum casing with hand drilled-filed holes, carbon skin and a little bit rainbow deco. I call it SA250W Carbon Deluxe also can be used as an emergency power supply~~~~~(no one cares but my phone with a poor battery) 1 Link to comment Share on other sites More sharing options...
Danger_Floof Posted July 18, 2017 Report Share Posted July 18, 2017 (edited) Hello, Evolv forum land! I've been lurking these forums for ages debating how badly I needed DNA-level TC in my life, but I finally bit the bullet: joined the DNA world and squonk life in one fell swoop and couldn't be happier! It's not a custom stabwood, but for now, this is my new daily-driver: The TC is amazing now that I've gotten my head around the nuances of properly setting up a DNA device, and I honestly doubt I'll ever be satisfied with anything less again. Brilliant work, Evolv! Loving it~ (Lost Vape didn't do a bad job, either, but we all know the board is the real star here ) Edited July 18, 2017 by Danger_Floof 2 Link to comment Share on other sites More sharing options...
everpresentnoob Posted July 23, 2017 Report Share Posted July 23, 2017 (edited) My home made StabWood DNA250.... Edited July 23, 2017 by everpresentnoob 3 Link to comment Share on other sites More sharing options...
UKDTweak Posted July 28, 2017 Report Share Posted July 28, 2017 (edited) <a href="http://imgur.com/biO6a5h"><img src="http://i.imgur.com/biO6a5h.jpg?1" title="source: imgur.com" /></a> Edited July 28, 2017 by UKDTweak Link to comment Share on other sites More sharing options...
dwcraig1 Posted August 1, 2017 Report Share Posted August 1, 2017 From Protovapor, LE Silo DNA250 2 Link to comment Share on other sites More sharing options...
Brent Lavine Posted August 5, 2017 Report Share Posted August 5, 2017 Just finished stab wood box with dna250. Awesome performance, as with all my DNA mods. Installation is straight forward and the custom options with escribe make set up a breeze. 5 Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted August 5, 2017 Report Share Posted August 5, 2017 @Brent Lavinewhat type of burl wood is that? maple? it gorgeous. 2 Link to comment Share on other sites More sharing options...
Brent Lavine Posted August 5, 2017 Report Share Posted August 5, 2017 Pretty sure it's maple, I found it in a scrap box at my lumber store. It was quite the find. Link to comment Share on other sites More sharing options...
EDMKEV Posted August 6, 2017 Report Share Posted August 6, 2017 My dna table check..i know not all dna 250s but still 2 Link to comment Share on other sites More sharing options...
Wayneo Posted August 6, 2017 Report Share Posted August 6, 2017 @EDMKEV Looks great. I think your Stabwood is from BDC like mine. What size battery is in it? Link to comment Share on other sites More sharing options...
EDMKEV Posted August 6, 2017 Report Share Posted August 6, 2017 @Wayneo My stabwood is made by Mad Modders & i believe it has a 1850mah lipo inside. Link to comment Share on other sites More sharing options...
UKDTweak Posted August 12, 2017 Report Share Posted August 12, 2017 (edited) Oni wrapped with a little Carbon Fibre... Edited August 12, 2017 by UKDTweak 1 Link to comment Share on other sites More sharing options...
John la Posted August 17, 2017 Report Share Posted August 17, 2017 On 06/08/2017 at 7:06 AM, EDMKEV said: My dna table check..i know not all dna 250s but still I want that hana v4 Link to comment Share on other sites More sharing options...
Brent Lavine Posted August 17, 2017 Report Share Posted August 17, 2017 Here's the newest 250. Along with the blank for the next. 2 Link to comment Share on other sites More sharing options...
EDMKEV Posted August 18, 2017 Report Share Posted August 18, 2017 On 08/16/2017 at 6:58 PM, John la said: I want that hana v4 aha ya it was expensive as hell but i loved it when i first saw it, doesnt get as much use as it used though but once in a while ill take it out 2 Link to comment Share on other sites More sharing options...
RictusGrin Posted August 18, 2017 Report Share Posted August 18, 2017 I just acquired this little unit this afternoon. 2 Link to comment Share on other sites More sharing options...
UKDTweak Posted August 27, 2017 Report Share Posted August 27, 2017 Custom 3D printed DNA250, 1300mAh lipo, matching drip tip for the Aromamizer 3 Link to comment Share on other sites More sharing options...
tattoo6.0 Posted October 1, 2017 Report Share Posted October 1, 2017 On 8/18/2017 at 3:26 PM, RictusGrin said: I just acquired this little unit this afternoon. Wow! I thought they were out of business. Where did you find a V250? Link to comment Share on other sites More sharing options...
mryuck69 Posted October 8, 2017 Report Share Posted October 8, 2017 Quote my skultra by SKD my first DNA mod still learning the ropes of the DNA Link to comment Share on other sites More sharing options...
Spyg0at Posted October 8, 2017 Report Share Posted October 8, 2017 (edited) A little goodness from JDMods...Thanks Joe!! 178 is the serial number...lol. Edited October 8, 2017 by Spyg0at Link to comment Share on other sites More sharing options...
UKDTweak Posted October 20, 2017 Report Share Posted October 20, 2017 Based off my custom Boxer Style DNA250, 3D printed mod, i have now made a Squonker version, 1300mAh lipo installed with a 7.5ml bottle. 2 Link to comment Share on other sites More sharing options...
EDMKEV Posted October 21, 2017 Report Share Posted October 21, 2017 On 10/20/2017 at 5:30 AM, UKDTweak said: Based off my custom Boxer Style DNA250, 3D printed mod, i have now made a Squonker version, 1300mAh lipo installed with a 7.5ml bottle. Thats pretty badass man great job! Link to comment Share on other sites More sharing options...
UKDTweak Posted October 23, 2017 Report Share Posted October 23, 2017 Cheers EDMKEV, ive since printed a new back door with better clips and support, the only screws are the 3 holding the board to the front of the box and 4 screws holding the front and back halves together, the door is just clipped in, no magnets. Link to comment Share on other sites More sharing options...
Brent Lavine Posted October 27, 2017 Report Share Posted October 27, 2017 The latest 250, fun to build, nice to use. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now