macz

Modcrate DNA200 Replacement Screen Most probably the printed button was the cause of it. Maybe too close to the onboard switch and got stuck between the front cover after pushing it?

Awesome build @asg!

Manufacturer: Schurter Part No: 3413.0332.22 Farnell UK Schurter RS Components UK

Slide the ribbon cable by wiggle it in gently same like I did on DNA40 large screen

Did you try on a different USB cable or port?

24.5mmx7.6mm

I would advice you to contact Opus since its still under warranty.

Probably presoldered by the vendor. @Inxept Where did you get the boards from?

Part number:59453-08211CHLF Manufacture: FCI

If you using onboard button, Up = Right and Down = Left.

Up/down remains same like all previous DNA boards when you switch screen orientation

If 3s 1300mah = 3900mah of 18650, so yes will last a day or two

You can buy M1.6 screws here BoltBase, they do carry other than allen head. Try checkout their eBay store for others. As for 2-56, you can get from Digikey or Mouser. I don't think McMaster Carr ships outside US.

Turnigy NanoTech 1300mAh West USA Warehouse If you're located outside US, look for another warehouse that closer to you.

This might help [url=http://www.mouser.com/ProductDetail/CK-Components/KSJ0M43180SHLFT/?qs=sGAEpiMZZMsgGjVA3toVBOjLgGZA5A1OrPrmtv%2fOUog=/]KSJ0M43180SHLFT[/url]

This question has been asked before, try check this thread /topic/67153-topic/?do=findComment&comment=904488

Alright well do you think there is any chance you guys will be selling the complete built box/chip together? On a side note, I was just wondering if the people in the pictures had to build the boxes themselves or did they come pre-built? [/QUOTE] All mods pics you seen here none of them comes pre-build. They build them from bottom up

Check your inbox, Brandon pm'd the info

I guess you need to go here for RMA http://www.evolvapor.com/warranty.php

Use this http://www.steam-engine.org/tcr.asp then save dna200 output as .csv and upload to eScribe

You have to two option either Evolv or Protovaper Via Evolv from http://www.evolvapor.com/warranty.php (helpdesk@evolvapor.com or "Contact Us") Via Protovaper http://www.protovapor.com/support/ Best that you mention this thread to either one of them.

Dude, you just can't stop do you?

PM basilray about that video size, I read somewhere on reddit he going upload it on youtube.

Fullymax 900mah Turnigy nano-tech 950mah

Flashing screen after upgrade to latest firmware?