FoggyMtnVape

Just as I suspected, I put my mod on charge at 50% and no problems. The issue is when it full or close to full.

That's what I'll do if I can't figure something out in here. How many times will they rma in the 1 year period? I had the board go out completely a week after I got it and they sent new one out and I soldered it in.

This is the first time I've had a problem like this since I've had mine last October.

Doesn't feel loose but I'll check that when I get back to my tools. Weird though that I only notice it when full or close to full.

I'm getting weirdness even without firing. I also fired it with mod just sitting securely on the table and still happens

It's while it's charged up that it seems to happen the most. Haven't paid much attention to when it's dead and I put it on charge.

I am having same problem with my other 2 cables now and also it goes straight to warranty service when plugged in half the time and the other half shows no amps or lightning bolt and the few times it starts charging it starts the amp low like .15 and slowly goes up to .99 but some times doesn't go over .6

One more thing that just happened, I plugged charger in to top off before leaving the house and it never showed the charge icon only the percentage and my amps which were at 0.00. Unplugged it and plugged it back in and same thing, switched cable and started working. I've been using this cable and haven't had an issue before and it works fine any other device.

So a few days ago I noticed that when my vtbox200 gets 100% charge and I fire it while still plugged in I get a warranty service screen and it won't fire (obviously) until I unplug from the charger. Anyone else ever see this happen? Should I be worried? Thanks.

Ahh, I see. Thanks for the info.

It's already a finished product. Saw pics yesterday where it looks like they have them already in a vape shop somewhere. Seems nda would go out the window with them being for sale already...

Here is another forum that has the actual mod pictured but not much info that I can find. Where are all the evolv people at? Surely they could say yay or nay. http://www.thailandvapers.com/threads/hcigar-vt75.15003/

Just saw an Hcigar 26650 VT75W mod on a post and they are claiming it's a new board from evolv that works with escribe. Can anyone confirm or deny this?

Yes, I submitted a ticket to evolv and they asked for the invoice so I sent them the next best thing (the shipping slip). They told me to send in the board or mod, which ever I could, so I desoldered the board and sent it in and they had a new one out to me in a couple days.

It was the cable I was using...... It looked thick and good quality but wouldn't do a whole amp. My battery cell 1 is now up to 4.00v when the charging stops so it is coming back up to normal a little at a time. The trick is since it isn't discharging as fast as the other 2 cells I vape it down till the other 2 are around 3.6-3.7v and then charge it from there and it lets the cell 1 catch up a bit.