Jump to content

Clean Colors (75C/100C/250C w/Replay - Many colors available) v2.4

   (23 reviews)

2 Screenshots

About This File

Note: The lightning bolt on the battery is only visible while charging.

  • Replay ready! (with temp control and wattage modes available too) - See below if you are having trouble with Replay
  • Main menu is on the top right
  • You can hide data on main screen in Main Screen menu (resistance, voltage, etc)
  • You can hide date/time from Lock screen in Time Config page (also can choose MM/DD or DD/MM date format)
  • There is now a ONE WATT version for those who want one-watt increments on the main screen (regular version is 5-watt increments). Now available in BLUE, BLACK, GREEN, and RED
    • see downloads page: Clean-Color--ONE-WATT-#_#.ecigtheme
  • A LOT of other stuff.. check it out!'

If you have requests for new colors, or other customization, let me know in the comments section and I can usually whip something up pretty quickly. 

--------------------------------------------------------------

Replay infoThis theme works with Replay for 75c devices (250c devices work with Replay by default). BUT you need to have the International Edition of EScribe 2.0 SP15.1 or later. Your 75c needs to have the right firmware as well (at least 1.1 SP33.2 -  that one works for me), once you update ESscribe and connect your device it should prompt you to update firmware. You also MUST enable Replay in your EScribe profile for it to work.

Using replay: once the above has been completed, load this theme and switch to a replay-enabled profile. There should be a "NO REPLAY" button seen on the main screen. This means there aren't yet any puffs to save. So take a few puffs, until you find one you like. Then the button should change to "SAVE," and you can click that to save that latest puff. Once Saved, the button changes to "PLAYING" and you are in Replay mode. Click that if you want to end Replay. 

If you are having trouble, check the Replay menu because it gives you more info: 

  • Replay Available (if theme/coil supports Replay [read-only])
  • Replay Ready (Replay is ready to be activated [read-only])
  • Replay Active (you can toggle this switch to save your last puff and activate Replay). 
  • You also cannot use a plain kanthal coil for Replay. You can use any temp sensing wire, including combinations (e.g. SS wrapped with kanthal). 

--------------------------------------------------------------

If anyone has suggestions, improvements, bugs, or anything else, please reach out in the comments below and/or leave a review. New update coming soon!! Thanks!

Here are the available color options. Let me know if you have requests for others:

2-2compare.thumb.png.6f84608149ae89dfdea4823c51be88a5.png


What's New in Version v2.4   See changelog

Released

Changelog v2.4.1:

  • Fixed ONE WATT versions.. they were not doing one watt increments in replay mode. That's fixed now. 

 

Changelog v2.4:

  • Fixed LED indicator: blue when firing, red while charging, green when full battery (with a pulsing effect)
  • Added option to change date format on main screen (either MM/DD or DD/MM, see Time Config menu)

 

Changelog v2.3:

  • Fixed main screen:
    • temp changes to voltage when in watt mode
    • small voltage changes to puff count when in watt mode (so voltage isn't displayed twice)
  • other minor tweaks/fixes

 

Changelog v2.2:

  • Fixed some items on the main screen what weren't positioned perfectly
  • Changed highlight/selection colors slightly for better readability
  • Added new ONE WATT version colors: now available in Blue, Green, Black, and Red

 

Changelog v2.1.2:

  • Added a ONE WATT version for those who want one-watt increments on the main screen. Wasn't sure if you all also wanted one degree increments on the temp, but that didn't seem useful so I kept that at 5. Note the it's currently only the blue theme that has the one watt version, but if you have requests for other colors, let me know.

 

Changelog v2.1.1:

  • Added Pride color scheme upon request

 

Changelog v2.1:

  • Updated battery icons to more easily tell capacity
  • Updated Replay icons so they are colorless (works for any background color), and now it goes > NO REPLAY (not available) > SAVE (ready to save puff) > PLAYING (Replay active)
  • Updated battery icons to show if you are charging or low battery (<25% = red, lightning bolt icon during charging)
  • Display page split into Display Settings and Main Screen Config pages
  • Puff counter is visible on main screen when in wattage mode (this can be hidden in Main Screen Config page)
  • Screens rearranged to be more cohesive and consistent
  • Items moved away from very edge of screen when possible to improve visibility
  • Added Mod Info screen that shows info specific to the device (battery pack volt, atty volt and current, mod/ambient temp)
  • Battery percent no longer changes color (so it fits in with other wallpapers, e.g. red or green)
    • the battery icon changes for charging or low battery
  • Added more colors (see screenshots or download page)

 

Changelog v2.0:

  • The theme is now called "Clean Colors" and offers many different color options
  • Also made a bunch of visual and usability improvements
  • Just added "Abstract Blue and Green" color option (which is technically v2.1, or more like v2.0.5.. more improvements to come for the actual v2.1)

 

Changelog v1.9:

  • fixed About screen thanks to @s3r
  • other minor stuff (there's now a Creative Commons license on the credits page.. if you want to use it for commercial use, just reach out to me)

Updated PLAINTEXT version too with the same. 

 

Changelog v1.8:

  • changed text color scheme slightly for readability (no more orange) 
  • changed selection highlighting for for better visibility
  • rearranged main screen a bit (battery percent and resistance are now larger and above voltage and current, since they are generally more useful)
  • fixed battery icon not turning red when charge was low
  • adjusted back button AGAIN to make it more visible when selected
  • changed battery icons to switch to red at 25% instead of 20% (keep your batteries healthy long term- charge them before they get too low!)
  • updated toggle switches and sliders so they are move visible when selected
  • adjusted Replay button on main screen to be more visible/easier to use, and I think it just looks better

Same changes for PLAINTEXT version. 

 

Changelog v1.7:

  • updated icons for better visibility (new sweet toggle switches, new battery/menu icons, back buttons, etc.)
    • edited a lot of them down to the pixel level to get rid of anti-aliasing
    • the checkboxes are now slider toggle type switches
  • added second version of the theme with simpler fonts by request (the "plaintext" version - also might be more legible if you are having trouble reading the main theme)
  • tweaked highlighting of selected objects for better visibility
  • adjusted organization of main screen to clean it up a bit (also to have more room to show profile names, though I recommend to keep profile names short- less than 15 characters or so if possible)
  • other minor tweaks and fixes

 

Changelog v1.6:

  • Changed settings for stats on main page. Now in the Display menu you can select to HIDE them (rather than select to SHOW them as it was previously). This is mainly so the screenshots are more accurate. If the stats are not displaying on the main page (current, voltage, resistance, battery percentage), check the settings in the Display menu.

 

Changelog v1.5:

  • FINALLY fixed the reset issue. Stats on "Current Stats" screen can be reset, and stats on "Total stats" screen cannot. This is by Evolv's design, it's not up to me. This one's for Ronbon172!!! Thanks for your patience :thumb:

 

Changelog v1.4:

  • changed wallpaper gradient slightly (let me know if you all have suggestions for improvements here)
  • adjusted Battery info page to remove Power bank settings for devices that don't support it (75c)
  • renamed Puff Stats screen to Total Stats
  • added Current Stats screen. These are the stats that you can reset. So the Total Stats screen will always have total numbers since you bought the device, and CANNOT be reset
  • changed color of selected items to more clearly indicate selection
  • changed back button, and now back button (almost) always takes you back to main screen (I found that more useful, since when I'm done in a sub-menu I generally want to go back to the main screen)
  • added Replay status and Save Puff button to home screen (no menu-diving required for Replay anymore)
  • Main screen shows when replay is available with the check box (enabled for current profile, Replay-compatible coil), then when you have a puff that you can save the the SAVE button appears and you can press that to save puff. CANCEL will turn it off
  • changed Replay screen to show Replay Available (based on coil/profile), Replay Ready (Replay is ready to be activated), and Replay Active (puff saved); still warmth adjustable
  • added atomizer voltage to main screen
  • added options to Display menu if you want a cleaner look on the main screen (can show/hide items from main screen: voltage, current, battery percent, resistance)
  • added option to show/hide date and time on lock screen- see Time menu (since time/date resets every time I change my battery, I find it useless)
  • adjusted New Coil screen so it shows both new resistance and old resistance
  • my logo on the About screen fills up according to room temperature.. acts as sort of a thermometer :) (actually this is not working yet.. I don't know if you can use temperature with the gauges, I'm working on it)
  • Removed option to select battery icon on main screen to take you to battery page, removed option to select resistance on main screen to take you to Coil Info page (let me know if you guys want this rolled back, I didn't find it very useful since those screens can be reached from the menu
  • other minor tweaks and fixes

 

Changelog v1.3.1:

  • Forgot to include Preheat settings page in main menu. It's now added. 

 

Changelog v1.3:

  • Replay mode added! You must enable replay in your EScribe profile for it to work
  • "Replay ON" message is displayed on main screen when it Replay is on and in use
  • Replay mode screen: status, view/change profile, notification if replay is available, enable replay, adjust warmth
  • Added Battery Info page that supports battery pack info (and live data): up to 4 cell voltages (some are hidden if your mod has less than 4 cells), live battery and atomizer voltage, live battery and atomizer current, power bank mode enable, power bank status
  • Added dedicated Display Settings screen: brightness, stealth
  • Main screan rearranged so the most useful data is on top (easy navigation between temp > power > menu)
  • Changed main menu to display profile, so you can change profile from there instead of having to go through menu
  • I added a status field on the main screen so you can view error messages there
  • Mod info screen (renamed Live Info) now with more data: live ohms, live voltage, live current, live coil temp, etc.
  • Battery percent and icons turn green during charging, and red when charge level is under 20% (normally blue/white)
  • Battery percent size increased on main screan for readability
  • Back buttons made a bit smaller
  • Back button from settings pages now go back to main screen (instead of main menu) (back button from info screens still goes back to info menu)
  • Selecting battery icon on main screen takes you to Battery Info page
  • Selecting resistance reading on main screen takes you to Coil Info page
  • If Replay is on, selecting "Replay On" button on main screen takes you to Replay settings page
  • All icons/gauges changed to blue color scheme
  • Made all menu lists round robin enabled
  • Minor tweaks and fixes
  • Like 7
  • Thanks 4

User Feedback

Recommended Comments



@Ronbon172 hah see this is why I did a beta. I added option to remove time and date from home screen, sicne for me they reset every time I change batteires so they are useless. but check the Time menu, you can enable them. 

I'll fix the reset before the full release, must have copied over the stats and forgot to change them to the resettable ones. Thanks again for catching that. Full release tonight with all the goodies and more info

And no, I don't think there's a way to go back after reset but I'll look into it

Edited by niandra3
Link to comment
Share on other sites

i just changed this setting as from my previous post and it is working again. I'm guessing with all the changes you probably forgot this one. hope all this is helpful.

********************************************************************************************************************************************************************************************

"just tried beta and reset still not working. also, the time/date was replaced with a lock symbol...not sure about that.

UPDATE:

as far as the puff counter, i changed the source to "total puffs since reset" and now the puff counter is working and selecting "yes" to reset is working.

is there a way after you press "yes" that it goes back to the parent screen? i can't figure that one out."

image.thumb.png.8aaff0862ea923590c2e08de3eae15c9.png

Edited yesterday at 09:10 AM by Ronbon172

  • Thanks 1
Link to comment
Share on other sites

oh man @Ronbon172 I'm sorry to have put you through this. I think there is a glitch in the Theme Designer because I did make this fix for the last version but it reverted back. ANYWAY, I just released a new super special v1.5 just for you above and the reset is 100% working. Sorry for the wait, and thanks for being so patient!!

edit: and no, I still haven't been able to find a way to get it to leave the screen once you press YES. I don't think it's possible at this time. 

Edited by niandra3
Link to comment
Share on other sites

@Ronbon172 sorry I just want to confirm so I can get it fixed. The latest version posted at the top of this page (v1.6) the reset isn't working on the Current Stats page? I tested it just now and it works for me. Again due to Evolv the total stats can't be reset. 

 

Link to comment
Share on other sites

Easily my favorite theme ever made. Great job niandra3 .  Being a low wattage vaper I have to change the wattage increments to either 1 watt or .5 watt but it's not hard to do in theme designer.  As good as the theme looks everywhere else, the Replay screen looks a little crowded to me.  The Replay with a check box seems unnecessary.  The default Evolv theme handles this a fairly tidy manner, IMHO. The wattage display could be larger and just have the save puff and playing text similar to the default theme instead of the  Replay with check box and save cancel text below it.  Again, thanks for your hard work on a great theme just wanted to toss out some ideas to you on the Replay screen.

  • Thanks 1
Link to comment
Share on other sites

@hawk256 thanks for the feedback! that's how I make the theme better.

I've heard people ask for higher AND lower wattage increments, so I figured 5 was compromise that most people could live with. I'm also a low-ish wattage vaper (usually 30-40w) but I never find the need to dial in like 33.5 for instance rather than 35. But I also use temp control so that's makes the exact wattage less important. But I could see how it becomes important if you are vaping at like 12w or something. 

As for replay..sigh.. I'm working on it. The theme designer is tricky when you've got a lot of stuff that is being hidden on a screen (e.g. hiding the Replay stuff when not in that mode). But I hear you, and I'm putting your request at the top of my list. The next release (today or tomorrow) should be much better in that regard. I also feel like I want to improve on the default theme's implementation, but you're right, as it is now, theirs is definitely cleaner. Anyway, thanks again!

Edited by niandra3
Link to comment
Share on other sites

11 minutes ago, niandra3 said:

@hawk256 thanks for the feedback! that's how I make the theme better.

I've heard people ask for higher AND lower wattage increments, so I figured 5 was compromise that most people could live with. I'm also a low-ish wattage vaper (usually 30-40w) but I never find the need to dial in like 33.5 for instance rather than 35. But I also use temp control so that's makes the exact wattage less important. But I could see how it becomes important if you are vaping at like 12w or something. 

As for replay..sigh.. I'm working on it. The theme designer is tricky when you've got a lot of stuff that is being hidden on a screen (e.g. hiding the Replay stuff when not in that mode). But I hear you, and I'm putting your request at the top of my list. The next release (today or tomorrow) should be much better in that regard. I also feel like I want to improve on the default theme's implementation, but you're right, as it is now, theirs is definitely cleaner. Anyway, thanks again!

Thank you for putting in the hard work. It's easy for me to say I want this or that when I'm not the one having to figure it out, LOL. Wattage increment is such an easy thing to fix in theme designer, it really shouldn't be an issue for you to worry about.

Replay is a great thing from the usage perspective but does seem to be a pain to get it formatted for a clean look in theme designer. As good as you have done with this theme so far, I have no doubt that you will get the Repaly screen looking as clean as the rest of the screens you have designed.

Link to comment
Share on other sites

1 minute ago, hawk256 said:

Thank you for putting in the hard work. It's easy for me to say I want this or that when I'm not the one having to figure it out, LOL. Wattage increment is such an easy thing to fix in theme designer, it really shouldn't be an issue for you to worry about.

Replay is a great thing from the usage perspective but does seem to be a pain to get it formatted for a clean look in theme designer. As good as you have done with this theme so far, I have no doubt that you will get the Repaly screen looking as clean as the rest of the screens you have designed.

@hawk256 do you know if the official theme you are talking about is available for download? I don't think I could find it in Theme Park apge. 

Link to comment
Share on other sites

2 minutes ago, niandra3 said:

@hawk256 do you know if the official theme you are talking about is available for download? I don't think I could find it in Theme Park apge. 

I don't think you have to download it. I just go into theme designer from Escribe  and click default theme.

  • Thanks 1
Link to comment
Share on other sites

@hawk256 I don't know if you get notified automatically or not, but I just pushed out version 1.7. I liked your suggestion about the replay on the main screen so I totally revamped it in this version. It's not exactly the same as the default theme, but I think it works well (and is possibly a cleaner look). Let me know what you think if you give it a try. Thanks! 

Link to comment
Share on other sites

still not set right. from current stats screen go to options, select "statics-since reset-puff count", then it will work correctly.

 

image.thumb.png.756b6d684753b4a1ef8abdd4ae629031.png

image.thumb.png.de755c15aa592f97f37d2c551643a89d.png

image.thumb.png.3476050bb01440eff1f5f83810b8fb3d.png

  • Confused 1
Link to comment
Share on other sites

@Ronbon172 lol i feel like I'm going insane.  

Ooooooooohhhh I think I finally get it.

That bottom number next to"Reset" is not supposed to be a puff counter.  It counts how many times you have reset the stats. The puff counter is the number up top, directly under "puffs" . They should be two different numbers. 

Is there something else wrong with the reset counter (that bottom right number)? For me it increases by one each time I reset the Current stats, which is how I designed it. Do you want it to behave differently?

Sorry that I misunderstood you for so long (:

Link to comment
Share on other sites

I tried to add a label there to make it more clear, but there isn't a lot of space. I'll move stuff around in the next version, so there isn't any confusion. 

Link to comment
Share on other sites

@Ronbon172 though you have just pointed out another bug, the puff Time is incorrect (looks like it's set to puff energy). THAT I can definitely fix in the next release. 

Link to comment
Share on other sites

15 hours ago, niandra3 said:

@hawk256 I don't know if you get notified automatically or not, but I just pushed out version 1.7. I liked your suggestion about the replay on the main screen so I totally revamped it in this version. It's not exactly the same as the default theme, but I think it works well (and is possibly a cleaner look). Let me know what you think if you give it a try. Thanks! 

Version 1.7 is working great for me. Replay screen looks a lot cleaner. I don't use the stats screen, so that part hasn't been an issue to me. Thanks for all the hard work on this theme.

Link to comment
Share on other sites

Thanks @hawk256! Yeah i think it is at a pretry stable place at this point.  The stats thing is a non issue, just miscommunication (though there is a small error I'll fix soon). Thanks for your guidance!

Link to comment
Share on other sites

i figured it out! i have been so focused at the counter to the right of "reset" and completely overlooked the actual counter below "puffs"!! what i did is simply delete counter to the right of "reset" and center "reset"...boom...done! sorry for all the confusion, i just want to contribute to this theme as much as possible to make it awesome as i feel this theme is the best one out there. i attached my small update so you can see what i did.

Clean-Black-and-Blue-1_7.ecigtheme

Link to comment
Share on other sites


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...