Agregory23 Posted October 26, 2017 Report Posted October 26, 2017 (edited) I recently got the Hcigar VT250S and every time I change to two batteries it gives me the check battery error. I went to Escribe and changed the settings to Two Cell at 160 watts and it did nothing. Please Help! Edited October 26, 2017 by Agregory23
Abdul0786 Posted October 30, 2017 Report Posted October 30, 2017 In Escribe check your battery cut off volt and I belive it should be 2.8 volt.
giz_60 Posted October 30, 2017 Report Posted October 30, 2017 On 10/26/2017 at 6:22 PM, Agregory23 said: I recently got the Hcigar VT250S and every time I change to two batteries it gives me the check battery error. I went to Escribe and changed the settings to Two Cell at 160 watts and it did nothing. Please Help! Did you upload you settings to the device after your changes? It appears that the board is still trying to find 3 cells, but only seeing 2 cells, hence the 'Check Battery' message...The soft cell cutoff setting is not going to cause this error
Agregory23 Posted October 30, 2017 Author Report Posted October 30, 2017 I uploaded to device but nothing changed. 0-02.rtf
giz_60 Posted October 30, 2017 Report Posted October 30, 2017 Can you post a screen shot of 'Device Monitor' as well...
giz_60 Posted October 30, 2017 Report Posted October 30, 2017 It looks like there is an issue with the device...if still in warranty, I would contact the vendor you purchased it from about the warranty...or you can open a ticket with Evolv...https://helpdesk.evolvapor.com/index.php?a=add&category=1
Toaster79 Posted October 31, 2017 Report Posted October 31, 2017 Did you by any chance remove the cover with the third battery while USB cable was attached and batteries installed?
Agregory23 Posted October 31, 2017 Author Report Posted October 31, 2017 Not when USB but the batteries where in...
misaellarrieta Posted November 2, 2017 Report Posted November 2, 2017 so, anybody has any updates, i just got the error...
Agregory23 Posted November 2, 2017 Author Report Posted November 2, 2017 I haven't been able to solve the issue. It seems like using two batteries with this mod is a bad thing to do...
retird Posted November 2, 2017 Report Posted November 2, 2017 On 10/30/2017 at 2:12 PM, giz_60 said: It looks like there is an issue with the device...if still in warranty, I would contact the vendor you purchased it from about the warranty...or you can open a ticket with Evolv...https://helpdesk.evolvapor.com/index.php?a=add&category=1 You might just consider @giz_60 's comment posted earlier....
Mahmut Posted November 16, 2017 Report Posted November 16, 2017 hello i am using hcigar vt250s. When using 2pcs, the device sometimes turns itself off, I press the fire button and it opens and closes the screen. I am wearing 3pil lid, I select 3 cell from PC connection but the battery is empty and I get a batery chek error on the screen of the device. help please
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now