Search the Community
Showing results for tags 'mod'.
Found 8 results
-
I'm building a mod for 3D printing. I want to put the screen so that you look at it on the top of the mod while still mounting the board vertically instead of horizontally. I'm having trouble achieving that because the screen cable is not long enough to do that and would place it in proximity to the fire button. Does anyone have any suggestions? Thanks, Ryan -
I have a SqEvo, that I'm looing to repair, and I'm wondering if the wire used in it's original construction is appropriate. It appears to be 18 gauge solid core enameled wire. The mod in question has 10.8 hours on it according to EScribe and I suspect friction of the battery positive wire rubbing against the 510 while the button was being pressed, is the cause for the enamel being burnt off the wire. Originally I was going to just desolder the Battery positive and put heat shrink over it, but then I started questioning the gauge of the wire used on the 510 + and the board ground. Is 18 gauge solid core wire adequate for a DNA 60 positive 510 and the ground connection? I've been looking through the Evolv datasheets and I'm left wondering, Did Evolv under or over spec the Wire for the DNA 60, DNA 75, DNA 200, and or the DNA 250, as they all have the same Specs? I'm not an electrical engineer, so any insight you can offer would be appreciated.
-
so, just got done charging my 18650's, all charged fully, green lights across the charging bay. went to put a pare in my drone, gave it a bunch of clicks to turn it on, nothing happened. tried a different set of cells, nothing happened. and went through all my 18650's to see if it was a faulty battery, but no power to the mod. also tried the cells in my geekvape nova and they all read max. even tried to reset my drone and it's still having the problem. what do because i jsut ordered an asgard 30 to put ontop of this mod (file attached is me demonstrating the issue after i've reset the mod videoplayback.mp4
-
Version 2.1
138 downloads
This is a Steam Punk theme I made. This theme has as many features as possible. All buttons work no problem. it has alot of custom icons/ color layout I made for the theme. Download it to get a up close and personal look at the theme. -
How can I make Custom Icons and Gauges for my themes and import them into Escribe. I don't need a step by step guide but more so a software I can use to create the icons and gauges.
-
I was wondering where I can find the caps you put over the onboard buttons that you actually press. I’d prefer metal if possible.
-
Greetings fellow vapers! I've been looking into building my own mod, woodwork powered by DNA250c, but with pretty much everything sorted, I've run into one major setback. Can't figure out wiring for a single battery device. The 250c data sheet has 2s, 3s, 4s wiring printed out, but no mention about single cell setup. Does the mean 250c can't run on a single battery? Or am I missing something? Cheers edit: typos
-
I recently got the Hcigar VT250S and every time I change to two batteries it gives me the check battery error. I went to Escribe and changed the settings to Two Cell at 160 watts and it did nothing. Please Help!
