Abdul0786

Hi all, if any once can help me with the mod internal resistance for the DNA 250 triade from lost vape ?? or where i can find the 510 short thread to measure the internal resistance ?? mine is set to 0.004 ohms. please let me know guys. Thanks in advance. abdul

Hi, The resistance is changing constantly in your rda or rdta which means the the 510 connector in your rda screw was casing this issue. try to use proper rda which the 510 was preturd enough to make solid contacts. i also having the issues with the rdta due to its screw at the bottom , i was using wotofo single coil rdta. if you tight the screw it will read one kind of resitance and if you loose it will read one kind of resistance.

Hope This might be hardware issue , when you put the batteries does it charges the battery ?? If it charges the battery then , remove the battery and charge it in external charger and try it.

In Escribe check your battery cut off volt and I belive it should be 2.8 volt.

First save your profile. Restore everything to default. Check your mod with different USb cable. Remove the batteries from the mod and try connecting the USB and check if it shows any power input . If it shows power input in device monitor , there might be the battery connector or wiring problem . Really I don't know if the issue is with the USB connector or battery connector .

Thank you so much Guys , this post above will be useful for many ppl like me. Thank you once again. Now all I m going to do with playing with 316L and ss430. Regards, Abdul

Hi , Many Thanks to all the hearts helping me and giving the information. Now I understand TFR CSV from steam engine is different and inputing the TCR value will add as new material . as I understand I can create a new material and input TCR for 316L as 0.00094. and use it for temp control. Or I can just use CSV from steam engine tfr for the material , if I tune the TFR in this CSV that will create as modified normal TCR material . Am I correct ?? Thanks a lot guys....

Hi , Thanks for your response, in material tab I have addeded the CSV file for both material and added to the device . But after adding the material in the device , how to the change the TCR VALUE for each material ?? . when I select the 316L and Click action>temperature coffin cent approximate> if I dial TCR value and check other material like SS430 the TCR is getting apilled for both , when click the SS430 >Click action button and the value shows the same as in for 316L , I mean the TCR value, Another question , Can I dial the TCR value in that.CSV TCR ?? OR I CAN JUST DIAL TCR ?? Tcf ,tfr same ? Regards, Abdul

Hi Everyone i Purchased the brand new DNA250 TRiDE because i wanted to use this mod in temp control at most accurate. i am using vape wire 316L from carzywireuk, ss430 from geekvape both are 26 AWG. i Downloaded the the csv of 316L AND SS430 and added in material tab in escribe. now.... i wanted to add the TCR value for 316L as 0.00092 , for SS430 i wanted to add 0.00138 by using the action button in escribe but i cant able to change the TCR for each material on the mod tab ..when i change the tcr value it changes to all material. so please any one suggest me what is the ISSUE or how to change the tcr value for each material ?? i wanted to vape with temp control and when there is no liquid in the cotton i wanted the dna to protect my cotton. also i heard SS430 will do better temp control so i purchased and i keept it. please suggest me what is best settings for both wire in escribe... i will use just single spaced coil build for all my set up. thanks in advance.

Go to material tab and select your material as temp sensing , make a tick in the box in describe.

I am using LG HE4 batteries , where I can find the CSV file for that. Also when checked my triade in device monitor it shows like cell1, cell2 (4.21v) and cell 3 only 3.95 , it is not charging more than that. I am trying find the CSV file for the battery profile and I can't find it. Please help me.

Good to know all working for you , what is mod resistance for DNA 250 Triade ? In device monitor all my battery was 4.12v but one battery 3.95 and battery bar was not full at all, what's the matter guys , all my batteries are new. Please help me