adski Posted June 17, 2017 Report Share Posted June 17, 2017 Let's see your DIY 75c's!! Not trying to be uppity but no mass produced mods allowed and we don't need to know how many ohms or what material your coil is or how many watts you are running at. The original show us your DNA200 was fantastic until people started posting their Lostvape zinc alloy rubbish and such. I have bought a modcrate silo case and have used a Sanyo 4000mAh 20700 battery. Screen holder from the modcrate link to Shapeways. Have also soldered straight to the battery instead of using a sled.(don't own an external charger) FYI the reference 510 copy from stealthvape UK does not fit. The magnets are included in the kit but I have epoxied it shut. I'm in the UK and the silo cost me $15 postage and £13 customs charges. 4 Link to comment Share on other sites More sharing options...
67exec Posted June 17, 2017 Report Share Posted June 17, 2017 My silo 75c. Brushed, magnets, 20700. I used a cheapo brass 510 that I had, but will be machining my next silo to hold a cisco/avid 510. 5 Link to comment Share on other sites More sharing options...
turbocad6 Posted June 17, 2017 Report Share Posted June 17, 2017 9 Link to comment Share on other sites More sharing options...
gkenney Posted June 22, 2017 Report Share Posted June 22, 2017 Modcrate - Silo DNA75C 2 Link to comment Share on other sites More sharing options...
KTMRider Posted June 25, 2017 Report Share Posted June 25, 2017 (edited) Soda blasted and painted with Rustoleum Matte Clear. Edited June 25, 2017 by KTMRider 6 Link to comment Share on other sites More sharing options...
gkenney Posted June 26, 2017 Report Share Posted June 26, 2017 Really a good looking final product!! Link to comment Share on other sites More sharing options...
antyac2108 Posted July 2, 2017 Report Share Posted July 2, 2017 (edited) Alpinetech GXL Dual 20700 I just built this today I really like it. It went together fairly easy. I used a varitube V2 510 but I think I'm going to order a Cisco 510 and replace it. I don't like The varitube V2. Also I love this board. I really hope they come out with a 250C. Edited July 2, 2017 by antyac2108 No reason 6 Link to comment Share on other sites More sharing options...
Wayneo Posted July 2, 2017 Report Share Posted July 2, 2017 7 minutes ago, antyac2108 said: Alpinetech GXL Dual 20700 Hot damn, I like it, then again I'm a round button external fire button guy. Did you use a Mosmax sled? and can we see a pic of the innards Link to comment Share on other sites More sharing options...
antyac2108 Posted July 2, 2017 Report Share Posted July 2, 2017 Yes I used the Mosmax sled. What innard pics do you want to see? 1 Link to comment Share on other sites More sharing options...
Wayneo Posted July 2, 2017 Report Share Posted July 2, 2017 Just what's posted in the last pic. I didn't notice it at first, or it was added after my comment. Very clean. Link to comment Share on other sites More sharing options...
rdmiii Posted July 7, 2017 Report Share Posted July 7, 2017 How is the board/holder held in the mod? Is it epoxy, screws? Thanks Link to comment Share on other sites More sharing options...
antyac2108 Posted July 7, 2017 Report Share Posted July 7, 2017 I use double-sided tape Link to comment Share on other sites More sharing options...
David247 Posted July 8, 2017 Report Share Posted July 8, 2017 On 6/17/2017 at 10:04 PM, turbocad6 said: Im liking these How much ? and where ? David 1 Link to comment Share on other sites More sharing options...
MaxVapor Posted July 10, 2017 Report Share Posted July 10, 2017 Powder coated matte black with Varitube v2 510 5 Link to comment Share on other sites More sharing options...
VapingBad Posted July 10, 2017 Report Share Posted July 10, 2017 That looked familiar until I saw 20700, very nice, but personally I would avoid the flat spring battery contacts, great for flashlights... 1 Link to comment Share on other sites More sharing options...
67exec Posted July 10, 2017 Report Share Posted July 10, 2017 @VapingBad what do you recommend? Link to comment Share on other sites More sharing options...
VapingBad Posted July 10, 2017 Report Share Posted July 10, 2017 1 hour ago, 67exec said: @VapingBad what do you recommend? Last 75 I did (don't have the time these days) I used a battery tray from an SMY something that died an was donated to me at the LDN vape meet by ghostryder72, but in general separating the spring from the contact and with a good spring you only need one end sprung. Sorry very late at night her, there are lots of ways, just contact as close to the battery and not through a spring, 510s had the same evolution.a while back, 1 Link to comment Share on other sites More sharing options...
VapingBad Posted July 10, 2017 Report Share Posted July 10, 2017 5 Link to comment Share on other sites More sharing options...
Wibberly Posted July 20, 2017 Report Share Posted July 20, 2017 Bit of a lash up but was quite keen to play with this board. Got a bit happy with the milling around the USB. 1mm brass sheet. 5 Link to comment Share on other sites More sharing options...
David247 Posted July 29, 2017 Report Share Posted July 29, 2017 2 Link to comment Share on other sites More sharing options...
67exec Posted July 29, 2017 Report Share Posted July 29, 2017 Nice mod, but pretty sure the 1st post explicitly asked that people not post made produced mods 5 minutes ago, David247 said: Link to comment Share on other sites More sharing options...
znapr Posted July 30, 2017 Report Share Posted July 30, 2017 Here's my 3D printed DNA75C. It needs more finer sanding and in the next version I will make the secondary buttons larger. However, it feels rock solid in the hand and more importantly very comfortable! 8 Link to comment Share on other sites More sharing options...
cveez11 Posted August 8, 2017 Report Share Posted August 8, 2017 The one in the middle is a 75c. Got another 75c being built and another mech being built. 2 Link to comment Share on other sites More sharing options...
adski Posted August 8, 2017 Author Report Share Posted August 8, 2017 (edited) 1 hour ago, cveez11 said: The one in the middle is a 75c. Got another 75c being built and another mech being built. Come on let's see her in full then. Edited August 8, 2017 by adski Link to comment Share on other sites More sharing options...
cveez11 Posted August 9, 2017 Report Share Posted August 9, 2017 Here you go 7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now