biggest and best lipo battery?

[JaI Haze]

I have been looking thru the forums and I want to pick up the best internal I can get my hands on for all my dnas, any help would be greatly appreciated

[jurdanas]

My:
1. http://www.hobbyking.com/hobbyking/store/__18207__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack.html
2. http://www.hobbyking.com/hobbyking/store/__18205__Turnigy_nano_tech_1000mAh_3S_45_90C_Lipo_Pack.html

me good, battery work easy, no hot when work.

[JaI Haze]

  jurdanas said:

My:
1. http://www.hobbyking.com/hobbyking/store/__18207__Turnigy_nano_tech_1300mAh_3S_45_90C_Lipo_Pack.html
2. http://www.hobbyking.com/hobbyking/store/__18205__Turnigy_nano_tech_1000mAh_3S_45_90C_Lipo_Pack.html

me good, battery work easy, no hot when work.

Expand  

yea see in the Hana and the vaporshark the batteries are to small. I hope the size of the top one you posted works best. What did you put yours in

[BillW50]

If you are looking for big, how about this one?

 

Specs:
Minimum Capacity: 5200mAh
Configuration: 3S1P / 11.1V / 3Cell
Constant Discharge: 10C (52 Amps)
Peak Discharge (10sec): 20C
Pack Weight: 331g
Pack Size: 142 x 49 x 22mm
Charge Plug: JST-XH
Discharge Plug: XT60

www.hobbyking.com/hobbyking/store/__66475__Multistar_High_Capacity_3S_5200mAh_Multi_Rotor_Lipo_Pack_AR_Warehouse_.html

[JaI Haze]

21mm W x 69.5mm length x 25mm D is the max I think becuase the hana is very limited in the room I got

[JaI Haze]

ok quick question; I am kind of embarrased but the wiring for the balance connector, if I was to get one of these batteries and wire it up.  I see the pos and neg but the other 4 wires that go into the connector, is there a number scheme I could use instead of colors?  Maybe I cant do this manually, unless I ask employees to help me out with the colors; its just super embarassing

[BillW50]

Evolv uses these labels for the balance connector (GND,1,2,3).

GND (black)
1 = cell 1 (read from GND and 1)
2 = cell 2 (read from 1 and 2)
3 = cell 3 (read from 2 and 3) [red]

[JaI Haze]

ok there is no one that makes a plug and play plug for the lipo balance connector bill?  I dont want to make a catastrophic decision.  I can solder the black and red to board no problem its just all those other colors. Trianopia color blindness is not on my side here

[VapingBad]

There is no fixed scheme, but identifying the ground and positive should be easy, 99% would be black and red.  The plug only goes in one way so as long as you solder the socket on the right way you cannot plug it in the wrong way.  The board labels these connections as GND, 1,2,3 if you want a number system.

 

[BillW50]

  JaI Haze said:

ok there is no one that makes a plug and play plug for the lipo balance connector bill?  I dont want to make a catastrophic decision.  I can solder the black and red to board no problem its just all those other colors. Trianopia color blindness is not on my side here

Expand  

Yes this is a common JST-XH connector. You can buy them at many places. If you need help, just ask.

[JaI Haze]

ok one more question, do you know if there is a list of what batteries fit in what or is it a hit or miss, measuring dimensions of the internal tray so to speak.  I know there is a good amount of DNA200 mods out there and this list would be extensive but I saw the sheet that has charts and what not just not what fits in what

[VapingBad]

This spreadsheet has real world dimensions and watt hours https://forum.evolvapor.com/topic/65816-topic/

[dwcraig1]

To  me #6 - 11 on the list are candidates for the Hana 200

[JaI Haze]

yeah see its 900mah I wanted to bring it to 13 for better life

[dwcraig1]

That would be like trying to put 16 oz in a 12 oz bottle, even if you could squeeze it in there it would fit really tight with no room for swelling...not good.

[Spector NS5 RD]

  JaI Haze said:

yeah see its 900mah I wanted to bring it to 13 for better life

Expand  

dwcraig is giving you an example of what will most likely be a direct replacement for the stock hana lipo.

higher mah = bigger in size lipo. you'll have a very hard time finding any 1300 mah lipo that will be a direct drop in, do to limited space. not impossible, just get ready to remove a lot of aluminum. i have seen people dremel out their hcigar vt200's to cram a larger lipo inside.   

you have to weigh what's practical/doable and how bad do you want it.

[JaI Haze]

thank you guys for all the assistance

[KevinMcc]

Ok guys I want to put a bigger lipo in my panzer dna 200 the 1500 mah isn't cutting it but I haven't removed it to measure does anyone know how big is can go