andrea.daru Posted September 15, 2016 Author Report Share Posted September 15, 2016 Hi allI've a problem with my brand new mod (Therion BF by LostVape) with the DNA 75 board.It seems like it doesn't recognize the SS316L as TC material.In fact when I press the fire button the display show OFF instead of the temperature.I've the fw version 2016-06-05.Previously I had a DNA 200 board and it work like a charm with the same wire/materialAnyone can help me? Link to comment Share on other sites More sharing options...
retird Posted September 15, 2016 Report Share Posted September 15, 2016 Post a screenshot of the profile settings you are using for your SS316L... maybe something there.... Link to comment Share on other sites More sharing options...
andrea.daru Posted September 15, 2016 Author Report Share Posted September 15, 2016 I've attached the screenshot... it's the default configuration given by lost vape Link to comment Share on other sites More sharing options...
lucaros5 Posted September 15, 2016 Report Share Posted September 15, 2016 Same problem here!! Link to comment Share on other sites More sharing options...
VapingBad Posted September 15, 2016 Report Share Posted September 15, 2016 Check the coil connections and 510, it is not seeing the temperature rise 185 F in the first second, that is only a small increase in resistance for ss. Link to comment Share on other sites More sharing options...
retird Posted September 15, 2016 Report Share Posted September 15, 2016 andrea.daru said:I've attached the screenshot... it's the default configuration given by lost vape Looks good there... Link to comment Share on other sites More sharing options...
andrea.daru Posted September 15, 2016 Author Report Share Posted September 15, 2016 I've found that in the tab "Materials" clicking on the button "Actions" -> "TCR" there's a value of 0,006.Is that value correct? Link to comment Share on other sites More sharing options...
lucaros5 Posted September 15, 2016 Report Share Posted September 15, 2016 Andrea, please check with attention the coil in your atomizer. It seems the problem is there in my case.Now my therion is working wellPs. Upload TFR settings manually to your therion, from steam engine website because lost vape tfr settings are wrong!! Link to comment Share on other sites More sharing options...
andrea.daru Posted September 15, 2016 Author Report Share Posted September 15, 2016 Lucaros5 thank you!I'll try later and I'll let you know if it works Link to comment Share on other sites More sharing options...
yoseff Posted September 15, 2016 Report Share Posted September 15, 2016 Please check that the material looks like this with close numbers to those. My Therion came with some wrong profiles, and only after i upload the right ones it started to work well on TCYou can try this 3 i attach here and see if it start to work well with any of them (I had these 3 at hand and i'm a bit busy, so cannot test them now)SS316L.csvDNA200-SS_316L_DJaquith_V7.csvJaquith_V7SS316.csv Link to comment Share on other sites More sharing options...
andrea.daru Posted September 18, 2016 Author Report Share Posted September 18, 2016 Thank to everyone... it was a wrong material profile.i used "DNA200-SS_316L_DJaquith_V7" (attached to yoseff last message) to solve the problem. Link to comment Share on other sites More sharing options...
Conanthewarrior Posted September 20, 2016 Report Share Posted September 20, 2016 I have had issues with SS 316L for a long time-until the SP3 update. I now use the SS 316 profile with SS 316L, and am very, very happy with its performance. Before in Escribe, it was very, very choppy once temp was reached, that was if it even recognised the wire as a TC wire, but now on all my Evolv powered devices, 4 DNA200's and 1 DNA 75, SS 316L works great. Link to comment Share on other sites More sharing options...
dwcraig1 Posted September 20, 2016 Report Share Posted September 20, 2016 I bought some 317L a few weeks ago so I could have some experience with the SS3xx but my SS430 works so good I just can't bring myself to change to it. Link to comment Share on other sites More sharing options...
maxmax Posted September 21, 2016 Report Share Posted September 21, 2016 thanks for the solution Link to comment Share on other sites More sharing options...
Bighead Posted October 2, 2016 Report Share Posted October 2, 2016 I have the same problem with ss316l from ud and try everything possible since 1 week ( Different Atomizer, Profiles, TCR) and nothing works. Device is Hcigar VT75 nanoThe same Atomizer on my VTC works fine in TC-SS mode. Link to comment Share on other sites More sharing options...
Jason_Bare Posted November 14, 2016 Report Share Posted November 14, 2016 That CSV. File for 316L is incorrect. The TCR for 316L is .00092I have attached the correct file.SS316L.csv Link to comment Share on other sites More sharing options...
VapingBad Posted November 14, 2016 Report Share Posted November 14, 2016 You can get the Evolv csv for 316 by opening a default config for you board, going to the materials tab and saving the 316 from the list in the left hand list, then connect your mod and remove 316 from any profile using it, then the materials lists. Now import the csv you saved in the left hand list, copy to the right hand list and select in the profiles you want and upload settings to device. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now