DNA 75 - Therion BF SS316L problem

[andrea.daru]

Hi all
I've a problem with my brand new mod (Therion BF by LostVape) with the DNA 75 board.
It seems like it doesn't recognize the SS316L as TC material.
In fact when I press the fire button the display show OFF instead of the temperature.
I've the fw version 2016-06-05.
Previously I had a DNA 200 board and it work like a charm with the same wire/material
Anyone can help me?

[retird]

Post a screenshot of the profile settings you are using for your SS316L... maybe something there....

[andrea.daru]

I've attached the screenshot... it's the default configuration given by lost vape

 

[lucaros5]

Same problem here!!

[VapingBad]

Check the coil connections and 510, it is not seeing the temperature rise 185 F in the first second, that is only a small increase in resistance for ss.

[retird]

andrea.daru said:

I've attached the screenshot... it's the default configuration given by lost vape

 

Looks good there...

[andrea.daru]

I've found that in the tab "Materials" clicking on the button "Actions" -> "TCR" there's a value of 0,006.

Is that value correct?

[lucaros5]

Andrea, please check with attention the coil in your atomizer. It seems the problem is there in my case.
Now my therion is working well
Ps. Upload TFR settings manually to your therion, from steam engine website because lost vape tfr settings are wrong!!

[andrea.daru]

Lucaros5 thank you!
I'll try later and I'll let you know if it works

[yoseff]

Please check that the material looks like this with close numbers to those.
 
My Therion came with some wrong profiles, and only after i upload the right ones it started to work well on TC
You can try this 3 i attach here and see if it start to work well with any of them (I had these 3 at hand and i'm a bit busy, so cannot test them now)

SS316L.csv

DNA200-SS_316L_DJaquith_V7.csv

Jaquith_V7SS316.csv

[andrea.daru]

Thank to everyone... it was a wrong material profile.
i used "DNA200-SS_316L_DJaquith_V7" (attached to yoseff last message) to solve the problem.

[Conanthewarrior]

I have had issues with SS 316L for a long time-until the SP3 update. 

I now use the SS 316 profile with SS 316L, and am very, very happy with its performance. Before in Escribe, it was very, very choppy once temp was reached, that was if it even recognised the wire as a TC wire, but now on all my Evolv powered devices, 4 DNA200's and 1 DNA 75, SS 316L works great. 

[dwcraig1]

I bought some 317L a few weeks ago so I could have some experience with the SS3xx but my SS430 works so good I just can't bring myself to change to it.

[maxmax]

thanks for the solution

[Bighead]

I have the same problem with ss316l from ud and try everything possible since 1 week ( Different Atomizer, Profiles, TCR) and nothing works. Device is Hcigar VT75 nano

The same Atomizer on my VTC works fine in TC-SS mode. 
  

[Jason_Bare]

That CSV. File for 316L is incorrect. The TCR for 316L is .00092

I have attached the correct file.

SS316L.csv

[VapingBad]

You can get the Evolv csv for 316 by opening a default config for you board, going to the materials tab and saving the 316 from the list in the left hand list, then connect your mod and remove 316 from any profile using it, then the materials lists. Now import the csv you saved in the left hand list, copy to the right hand list and select in the profiles you want and upload settings to device.