Jump to content

hcigar vt200 battery capacity set?


Shadow85

Recommended Posts

not so sure the battery capacity is all they claim!
I ran the battery analyser on a vt 200 and the result was 11.09Wh

when i was running the battery at 14.43 i was getting "weak battery " at 20%

now at 11.09 with the same coil and setup it vapes all the way down to 0% battery and  then 4-5 puffs after that it displays weak battery.

so not too happy it only has 11.09 Wh but i do now have an accurate battery meter!

if you want to try my battery csv from the analyser it is below:-


i changed it to a .txt file to upload but if you change it to or save it as a .csv it will work

hcigar_vt200battery.txt

Link to comment
Share on other sites

lewisss said:

not so sure the battery capacity is all they claim!
I ran the battery analyser on a vt 200 and the result was 11.09Wh

when i was running the battery at 14.43 i was getting "weak battery " at 20%

now at 11.09 with the same coil and setup it vapes all the way down to 0% battery and  then 4-5 puffs after that it displays weak battery.

so not too happy it only has 11.09 Wh but i do now have an accurate battery meter!

if you want to try my battery csv from the analyser it is below:-


i changed it to a .txt file to upload but if you change it to or save it as a .csv it will work



is your cut off set to 3.11v?
Link to comment
Share on other sites

Jiphone said:

[QUOTE=lewisss]not so sure the battery capacity is all they claim!
I ran the battery analyser on a vt 200 and the result was 11.09Wh

when i was running the battery at 14.43 i was getting "weak battery " at 20%

now at 11.09 with the same coil and setup it vapes all the way down to 0% battery and  then 4-5 puffs after that it displays weak battery.

so not too happy it only has 11.09 Wh but i do now have an accurate battery meter!

if you want to try my battery csv from the analyser it is below:-


i changed it to a .txt file to upload but if you change it to or save it as a .csv it will work



is your cut off set to 3.11v?[/QUOTE]

Nope cut off is set to 3.09
Link to comment
Share on other sites

  • 5 months later...
lewisss said:

not so sure the battery capacity is all they claim!
I ran the battery analyser on a vt 200 and the result was 11.09Wh

when i was running the battery at 14.43 i was getting "weak battery " at 20%

now at 11.09 with the same coil and setup it vapes all the way down to 0% battery and  then 4-5 puffs after that it displays weak battery.

so not too happy it only has 11.09 Wh but i do now have an accurate battery meter!

if you want to try my battery csv from the analyser it is below:-


i changed it to a .txt file to upload but if you change it to or save it as a .csv it will work

Link to comment
Share on other sites

Dubbzz said:



did you get the vt200 to fit into your lavabox?? if so is it worth upgrading to it??



It fits ok without any messing. You just push it down towards the wiring and it just clips under the edge of the 510 housing.

As to whether it is worth it or not that's debatable given that it is not a true 1300mAh i only did it because the original was goosed and it was a straightforward replacement.

[video]https://www.youtube.com/watch?v=W4aWC8tHPEg[/video]
Link to comment
Share on other sites

  • 5 weeks later...
  • 7 months later...
fibercarbon said:

You only need battery type set to Lipo 3 cell, the other settings are just to give the battery gauge better info to estimate the reaming %.

Where do I find this setting ??? currently it wont charge at all ..


I replied about charging in another thread.  To get to the battery settings you need to go to EScribe - Options - User Interface and choose Advanced or Manufacture to enable the Mod tab.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...