Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 Hello.Im running the latest escribe that supports the 75C as I have been asked to design a Theme for a company. My problem is, I have hooked up my DNA200 and I want the increments to go up by 0.2, I found the setting in Theme Designer, but when I press Apply and upload the settings, it hasnt applied the increment to 0.2, stays 0.1.Any help will be great, Thanks. Link to comment Share on other sites More sharing options...
VapingBad Posted May 7, 2017 Report Share Posted May 7, 2017 I haven't tried TD for the 200, but as a heads up the 75C the min step on temp and watts is 1. If you load an older version of EScrib and it accepts 0.2 then it's a bug in TD. Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 You really should have a DNA75 Color board to use the features in Theme Designer for the 75 Color.... when hooked up to a DNA 200 you can't get to this screen (as far as I know)..... I set the increments using a DNA75 color board as seen here and the increments will change by 0.2 watts. Link to comment Share on other sites More sharing options...
Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 Booted up another computer with older version of escribe, 0.2 increments uploaded fine, must be a bug in the beta software.Thanks for replying. Link to comment Share on other sites More sharing options...
Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 I currently dont have the 75C board, but installed the current escribe for the theme designer for when i receive it. Problem im having is the latest version has over written the old version, took me a good few minutes to find the increment settings, As its in theme designer which is intended for the 75C, do you think this is a bug? Theme designer does allow custom screens for my 200 and 250, but as the increments feature has moved to theme designer, i think its not applying it as the board isnt a 75C. Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 I believe you will find that Theme Designer for DNA200 is different than Theme Designer for the 75 Color.. here is a screen from the 75 Color Theme Designer.... Link to comment Share on other sites More sharing options...
Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 Big difference, I checked the 75C options without a device connected to have a browse around. If you try Theme Designer with a 200 or 250, it brings up the Screen image import options that was under Theme like normal, just a few other options, such as Wattage Increments, but doesn't work, 0.1 always stays. Im sure they will fix it in next update Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 Attached here is the Evolv Default DNA75 Color *.ecig file. Download it to your computer and then click it and see if it will start in EScribe 2.0 (no board or device attached). In DNA75 Color mode then start Theme Designer from there.The 0.2 increment works for me with the 75 Color Theme Designer....DNA75C Default .ecig file.ecig Link to comment Share on other sites More sharing options...
Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 I think I may have confused you guys sorry.Increments is working for my DNA200 board sorry, Its this board im having problems with, sorry for the confusion. Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 No problem.... Good luck designing the Theme for the 75 Color.... Link to comment Share on other sites More sharing options...
Doyle4 Posted May 7, 2017 Author Report Share Posted May 7, 2017 Ahh balls.. I should proof read my comments before posting..Increments ISNT working on my DNA200, tried with my 250 and that also isnt working, so has to be a bug in the software Thanks, Still very new so its taking me sometime, will get there I hope, so many options, its great! Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 Glad you posted an update....What you wanted to do with the 75 Color works with a 75 Color....AND I drug out a DNA200 and tried to do what you wanted with the 200 and it didn't take. Yep, thinkin' it's a bug now.... THX Link to comment Share on other sites More sharing options...
Jolly Rodger Posted May 7, 2017 Report Share Posted May 7, 2017 retird said:You really should have a DNA75 Color board to use the features in Theme Designer for the 75 Color.... when hooked up to a DNA 200 you can't get to this screen (as far as I know)..... I set the increments using a DNA75 color board as seen here and the increments will change by 0.2 watts. Which screen & field is this on...I can't seem to find it... Link to comment Share on other sites More sharing options...
retird Posted May 7, 2017 Report Share Posted May 7, 2017 I'm using VB's Theme and it is his Main Screen with options for wattage.... Link to comment Share on other sites More sharing options...
Jolly Rodger Posted May 8, 2017 Report Share Posted May 8, 2017 retird said:I'm using VB's Theme and it is his Main Screen with options for wattage....Thank you!!! Link to comment Share on other sites More sharing options...
James Posted May 13, 2017 Report Share Posted May 13, 2017 On 5/7/2017 at 2:15 PM, Doyle4 said: My problem is, I have hooked up my DNA200 and I want the increments to go up by 0.2, I found the setting in Theme Designer, but when I press Apply and upload the settings, it hasnt applied the increment to 0.2, stays 0.1. This bug is fixed in EScribe 2.0 SP1. Thanks! 1 Link to comment Share on other sites More sharing options...
ScaryMonkeyMan Posted May 16, 2017 Report Share Posted May 16, 2017 That's one thing I noticed. Try saving the file then applying it. Learned that one the hard way. Link to comment Share on other sites More sharing options...
Doyle4 Posted May 21, 2017 Author Report Share Posted May 21, 2017 On 5/13/2017 at 5:57 PM, James said: This bug is fixed in EScribe 2.0 SP1. Thanks! Thank you very much James! Tested and working great Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now