Frogmod

If you guy’s are interested in the screen holder or a dummy 250C board here’s a link https://www.shapeways.com/shops/laguz75

ill give a shot, someone said it looks like a fingerprint, I used the wrong end mill but it's to size

Yeah I can't wait, I started making there reference case last night

ive thought about a 3D printer but went with a mill. I can always put a extruder head on my machine and have a 5 axis 3D printer. Pycam takes a long time to compile the sled to gcode but it's free so I shouldn't complain. I'll post a pic when I'm finished with it

a 20700 battery would be easy to do I would just scale the dimension up from a 18650 sled. Right now I'm working on a tool path for a 26650/18650 battery sled file I got from thingiverse. The spindle motor that cam with it uses ER11 collets the maximum size bit I can use is 1/4". I can get ER16 or ER20 collet spindle motors for it also.

thanks :-) my next project is to make a wooden evolv reference case

bought this bad ass hobby mill off ebay in November its a water cooled 1.5Kw 5 axis cnc. I'm a cnc operator at work so there wasn't much of a learning curve here are some pic's

the decimal place for the ohms is off in the battery analyzer for EScribe 1.2 SP4

/topic/66841-topic/?do=findComment&comment=901299 this will show you how I connected it up. its the same set up as the 1590 G+

I decided to update my 200 by adding some knife clips and a fast 5A charging port. (like on my 1590B) the battery can handle a 5C charge so I'm safe there. charge time takes 20mins from the weak battery display. this add-on mod is so worth it on a vemon 1300Mah battery.

For me it's the battery, I get the same results with the external balancing board

it was set to max puff but I switched it to max charge. I did check it with the volt meter. I just got done doing a second battery analyzer. And cell 1 started to drain faster, it's charging now and it's lagging behind so I'm leaning towards the the battery at this point. Still testing it thow.

I'm having the same oddity but for me it's cell 1 4.00v cell 2 4.10v cell 3 4.10v and it's done charging. I'm using a max amps 1850mAh. I can charge up cell 1 ( the last pack in a series ) by its self it charges fine while connected to device monitor. I've ran battery analyzer and cell 1 lags behind a little it's a new battery. Right now I'm running a 2nd test to see if it's doing it again, if it does I'm going throw it on my custom battery charger and watch all three cells charge.

Has there been a update fix to the battery analyzer screen

test running my 75 before its sold

There's a link at the top of the thread on where to get one

as soon as it's out I'm getting it. I wouldn't worry about feeling guilty. I took what you said and I'm going to apply a different coil build in it. There's no premade coils it's an RTA, I may need 5m of wire and about 20 sheets of cotton for this monster

your probably right I vape high vg juice as well. If it's not all cracked up to be I know someone will buy it off of me. Wednesday or Thursday is when it will be available at CJ vapors.

oh yeah I tried it out for a full day. I didn't think there was any improvement as far as power but I didn't max it out. The TI profile I think was smoother. And that was the only thing I tried. I told the customer if he had any problems to let me know. He was ecstatic about getting, he was vaping at 125w for the 30mins I was there at the shop.

I built this for a customer before the deadline. I'm sure there are others that have done the same.

Anyone here thinking about getting the dump tank? I have to buy this thing it's to much of an oddity

i think he was wanting more of a timer type preheat. My e-Vic supreme had software that was timer based that you could adjust the wattage in .5sec resolution. You could simulate TC that way but it won't be the same as TC though.

Yeah :-( I wanted to keep the board but I had to sell it before the 8th deadline. My dna200 is keeping me happy for now till I can buy some more 250's