Frogmod

I haven’t seen very many uranium raffir mods so decided to make a lipo version.

Built this one for a customer he will be sanding, polishing and assembling this one himself

Here are my builds the stab wood version has the same battery as the lucite version

What’s the baud rate of the USB of the DNA chip so that way my touchscreen is sending/receiving at the same speed?

It’s nice to see someone else install knife clips on there mod. I did this to my 250. I plan on doing the same for my out and about 250C as well.

I’m glade you like it. What kind of issues did you have with the buttons, so That way I can change it in the model, when you said “finding proper screws” are you talking about the board screws?

This one is ready https://www.shapeways.com/product/VLFHHEXJP/30mm-250c-referencecase this mod was design for the battery in the discription, more mod cases coming soon

Monday it will be ready

I’ll have it ready Monday had to do a few design changes.

What do you guys think? My 18650 boxer clone. I only had internet pics to go off of. Right now I’m printing it before I upload it to shapeways. A 21700 version is in the works.

I have a custom 12v 5amp charger system so the batteries don’t get hot. The battery I’m using is about 2yrs old. I understand the amperage being limited in the boards cuz you can’t really run 5c through cylinder batteries. And if evolv up the amperage they would be in the news for all the wrong reasons.

I ordered a few 4s balancing boards to piggyback onto the 250c. I did this to my 200/250 mods, charging at 5c is nice, 20min charge time on my 12hr mod (1300 lipo)

http://www.mamumods.com/dna250c/DNA250C.zip http://www.mamumods.com/dna250c/250CReferenceCase.zip

Here is a side by side comparison

It’s up on SW’s :-) I added some text to it, it’s only raised up .25mm

Yes it’s evolv’s design, anyone can get the files and make one. I’m going to machine the original case for a customer out of aluminum.

Ok, I’m just about finished with it (45mins)

Do you want the evolv style 510 dimensions or a universal 510. I have two different 510 styles on shapeways let me know what your wanting.

I designed a 30mm version of the ref case for 30mm tanks, it’s up on shapeways it’s 10mm taller and 30mm wide, the battery link is in the description

I don’t but I can design one for you, do you have a link to the battery?

Here is my 250C mod it takes 3x 21700 im pretty close on finishing it up then I’ll post it on SW’s

Here a links to the 250C reference case https://www.shapeways.com/product/ATHC4UZ6N/dna250c-reference-case

Upload some dna 250c 21700 battery sleds today. 18650,26650 and 18mm board sleds in the same configuration coming soon. I can print these sleds 50% cheaper in pla and any color just msg me. https://www.shapeways.com/shops/laguz75

Some of the models will hold a 30mm atty. I vape on nothing but 30mm so that’s one thing I don’t Like is over hang.

There will be a 21700 and a 18650 version of the 250C boxmod listed on shapways somewhere around the end of next week in 2,3,4s configuration, plus battery holders as well for the 21700 and the 18650’s in the listed link above. Once posted read the description for hardware part numbers and links