-
Posts
2,610 -
Joined
-
Last visited
-
Days Won
135
Content Type
Profiles
Forums
Downloads
Posts posted by retird
-
-
Try a different USB cable..... must be a cable that can transfer data and not just a charge only cable... this is the first thing to try...
-
Duplicate posts may cause confusion...... see your other post for replies.
-
7 hours ago, mrphilip said:
Can we get an Apple version of DNAMate for iPhones? Please.
https://play.google.com/store/apps/details?id=com.raverrr.dnamate&hl=en_US
You should contact the person that made this app for Android and ask him. As far as I know this app is not from Evolv. You can contact the maker of this app at
dnamate.info@gmail.com- 1
-
-
54 minutes ago, El_Kapitan said:
I went ahead and asked Evolv this. No answer. I can't understand the big mystery about this issue.
Maybe someone from the company will read this thread and reply...
Maybe your question could better be answered by contacting the mod makers (manufacturers) as to why they are not marketing a 75C single battery mod. As far as I know the 75C board is still available at Evolv.
- 1
-
From this data sheet:
https://downloads.evolvapor.com/dna250.pdf
We see:
Too Hot: The DNA 250 has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.
Plug it into EScribe and start Device Monitor to see board temperature. Does this only show while charging or even while vaping and not charging?
-
It's telling you there is an update..... click it if you want to install it...
-
Which device do you have? Does it have external actuators (fire button)?
Possibly could be wiring issue whereby bare wires may be touching causing constant firing.... just a guess as little information thus far....
- 1
-
Sounds like a design (mod) issue rather than a DNA board issue..... but you might mention it to Evolv and see what they say.... let us know what you find out....
https://helpdesk.evolvapor.com/index.php?a=add&category=1
-
As you know Evolv's warranty on the board is 1 year but you might start a ticket with them....
https://helpdesk.evolvapor.com/index.php?a=add&category=1
-
Not experiencing this with my Win10 with the latest Windows updates installed.. I ran Device Monitor just now and let it run for many, many minutes. If you look at the lower left corner of the graph you will see a left pointing arrow. A right pointing arrow is in the lower right corner of the graph. The slider between these arrows moves from left to right as the monitor is running and the graph is always updating along the way. At some point the slider will reach the right arrow (takes a long, long time to get there). I let it run for over 15 minutes and the slider has not reached the right arrow yet so I don't know if it stops updating the graph when it reaches the right arrow or not. The longer it runs the slower the slider moves.
You might connect a device that needs charging and let it run and take a vape every 5 minutes or so to see if it still is updating the graph...
UPDATE: over 25 minutes and still running....
-
hum... do you have a 250 board or a 250C board... did you follow the pinout wiring as shown in the datasheet?
250C datasheet: https://downloads.evolvapor.com/dna250color.pdf
250 datasheet: https://downloads.evolvapor.com/dna250.pdf
Also check the button settings in EScribe
-
Looks like mine it is red, yellow, green, blue green. solid blue green, led off
-
And I assume you have ran Case Analyzer on the 250C as you may have done on the 200's.
Yep one should not carry bare batteries in one's pocket nor charge batteries while unattended....
-
or cockpit trouble? ... just kidding😊........ but I like to vape simple and only use throw away coils and Notch Coils.... been through the gambit in the 9 years I've been vaping and we each should vape what and how we like... and should hesitate throwing barbs like " PITFA nanny/safety feature for newbs who simply screw in a new throwaway coil and never learnt to check new builds for shorts on a tester" .... surely you were jesting.....
Hope you get it figured out..... 😊
- 1
-
-
Did a bit of research too and from this link https://www.made-in-china.com/showroom/daidaizi/product-detailwoOQWEqFkbkr/China-Aludirome-FeCrAl-Alloy-Electric-Heating-Wire.html we see that Aludirome wire is a " FeCrAl alloy". Then from this link http://www.thermalloys.com/site/en/alloys/fecralalloys.html we see that it is mostly made of Kanthal as @dwcraig1 said.
-
You might open a ticket with Evolv and explain the issue and give the crash log info. Ask that this be given to James........ he doesn't get by here that often....... here is the link....
https://helpdesk.evolvapor.com/index.php?a=add&category=1
- 1
-
Could it be the Profile Number?
-
This video is for the 75C but may be helpful....
-
What happens when you unlock it and then momentarily touch the fire button (don't hold it in as if normally firing it)? Does it still lock? Maybe a dirty contact in the fire button?
-
Are you vaping in TC or Replay mode, or wattage mode? Can you post a screenshot of Device Monitor (while vaping) so Live readings can bwe seen?
-
From what I see that is a HCigar VT250S DNA 250 device with a DNA250 board in it... There is a place in this forum for the DNA 250... You can post there....
-
Where did you download the EScribe software from? Was it here? https://www.evolvapor.com/escribe Try uninstalling EScribe and then install the INT version from the link given.....
Also you might want to view this video if it still is crapping out. It may or may not help........
OEM and retail 250C Chip
in General Discussion
Posted